Ag_3PO_4/Palygorskite的静电调控合成及可见光催化降解罗丹明B和气相异丙醇

以大比表面的廉价易得的凹凸棒(palygorskite)为载体,借助带电荷界面的静电调控作用,采用吸附-沉积沉淀方法制备磷酸银/凹凸棒(Ag3PO4/palygorskite)复合催化剂.利用X-射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、原子吸收光谱(AAS)、紫外可见漫反射光谱(UV-Vis DRS)等技术系统地表征催化剂.之所以能够制备高分散性的凹凸棒负载的磷酸银催化剂,主要是因为凹凸棒具有较大的比表面积、带负电荷界面以及适宜的磷酸根前驱体.以可见光催化脱色降解罗丹明B和氧化降解异丙醇为探针反应,考察复合材料的催化性能.研究表明,与纯磷酸银相比,磷酸银/凹凸棒催化脱色降解罗丹明B和氧化降解异丙醇速率分别提高了2和2.5倍.     

Improved Photocatalytic Activity and Stability of Nano‐sized Ag/Ag2CO3 Plasmonic Photocatalyst by Surface Modification of Fe(III) Nanocluster

The surface modification of Ag/Ag₂CO₃ with Fe(III) ions has been achieved through simply photoreduction‐impregnation method. The obtained products were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV‐vis absorption spectroscopy. Under visible‐light irradiation (γ>420 nm), the Fe(III)/Ag/Ag₂CO₃ sample displays a higher photocatalytic activity and stability than pure Ag₂CO₃ and Ag/Ag₂CO₃ samples for the degradation of methyl orange (MO). The improved photocatalytic activity and stability of this ternary system could be ascribed to the synergetic effect between Ag nanoparticles and Fe(III) nanocluster. The metallic Ag nanoparticles cause an obviously enhanced visible‐light absorption to produce more photogenerated charges, while the Fe(III) works as an active site for the following oxygen reduction to reduce the recombination rate of photogenerated electrons and holes.     

不同形貌Ag_3PO_4的表面自由能及原位光催化过程的热力学和动力学参数

<正>目前,在利用表面能研究纳米催化剂形貌效应时,多以催化剂表面原子排布或不同晶面的夹角与密勒指数间的关系来定性描述表面能高低[1,2],或利用密度泛函理论对表面能进行理论计算[3,4],但其数值可能会因计算方法和模型不符而与真实值存在偏差,而表面能的实验测定至今仍无精确、可靠、通用的方法[5].因此发展一种准确获取表面能的普适性方法并与材料的催化性能相关联非常必要.微量热技术能对体系变化过程进行实时监测,通过体系变化过程的热力学和动力学参数获取纳米材料的     

ZnIn2S4/TiO2/Ag复合光催化剂的制备及分解水制氢性能

首先采用溶剂热法将1D TiO_2纳米带均匀地穿插到片层结构组装而成的3D ZnIn_2S_4微球中,所形成的异质结构能有效抑制光生电子-空穴对。其次利用光沉积法将0D Ag纳米粒子负载在3D ZnIn_2S_4/1D TiO_2异质结构上。得益于0D Ag纳米粒子的等离子体效应及电子助催化剂作用,三元3D ZnIn_2S_4/1D TiO_2/0D Ag复合光催化剂在分解水制氢方面表现出优异的性能。在模拟太阳光照射下,ZnIn_2S_4/TiO_2/Ag复合光催化剂的产氢速率达到715μmol·g~(-1)·h~(-1),相对于ZnIn_2S_4/TiO_2、ZnIn_2S_4/P25、ZnIn_2S_4、TiO_2和P25分别提高了2.7倍、3.3倍、3.8倍、184倍和518倍。同时借助于X射线衍射、扫描电子和透射电子显微镜、X射线光电子能谱和紫外可见漫反射光谱等表征手段进一步论证了复合催化剂的优异性能。     

含有二维十二核水簇的银配合物的合成及结构表征

以Hpda[3-(3-吡啶基)乙烯酸]为配体、AgNO_3为金属源,常温下合成了一个新颖的Ag配合物[Ag_2(pda)_2(H_2O)_3]n.通过往AgNO_3和Hpda的悬浊液中滴加氨水,室温下随着氨水的挥发澄清液中析出无色的晶体,所得产物经红外、XRD及热重表征.该分子中含有2个Ag中心,每个Ag中心通过pda配体及Ag—Ag键相连形成花生形状的一维链,该链进一步被Ag—Ag键连接形成双链结构.游离的水分子之间相互作用形成二维层状水簇,呈有趣的L4(4)12(8)形状.水分子与pda配体中的羧基氧通过氢键相互作用,将一维双链延伸成三维网络结构.     

Sensitive and Selective Fluorescent and Colorimetric Sensor for Ag+ Based on the Supramolecular Self‐Assembly in Semi‐Water

Specific recognition of ultratrace levels of ions in semi‐water using super‐quicker methods is still a challenge for environmental monitoring. Herein we report a fluorescent and colormetric sensor ( ZH ) based on supramolecular self‐assembly, whose structure was destroyed by the addition of ultratrace of silver ions. The process promoted either naked eye visible color changes or fluorescence intensity quenched in conjunction with a wide pH range. Systematic studies revealed very high selectivity (0.07 µmol/L) for silver ions, and other common cations, e.g ., Hg²⁺, Cu²⁺, Cd²⁺, Pb²⁺ had nearly no influence on the sensing behavior. This sensor also served as a multiple use of component in sensing materials by addition of I⁻ into the mixture of ZH and Ag⁺ (about 5 times). What's more, ZH containing filter paper emerged distinct color and fluorescence changes upon exposure to silver (Ag⁺), which could be used as a portable method to undertake field testing for Ag ⁺ .     

硫氰根选择性吸附在g-C_3N_4/Ag表面增强其光催化制氢性能(英文)

作为一种无金属的新型半导体材料,g-C_3N_4因具有稳定的物理化学性质及合适的能带结构而引起人们的关注.理论上g-C_3N_4完全满足水分解的电势条件.然而研究发现,g-C_3N_4材料本身的光催化性能并不好,这主要是由于半导体材料被光激发后生成的自由电子和空穴还没来得及到达材料表面参与反应,就在材料体相内发生复合,导致电子参与有效光催化制氢反应的几率大大降低.同时还发现,将少量的贵金属,如Pt,Au,Pd作助催化剂修饰在该半导体表面,其光催化性能明显提高.但由于这些贵金属储量非常稀少,价格昂贵,导致它们的使用受到一定限制.而Ag作为一种价格远低于Pt,Au,Pd的贵金属,也得到了广泛的研究.研究表明,金属Ag储存电子的能力很好,因此可以有效地将半导体上生成的光生电子快速转移到Ag上面去,从而达到电子空穴快速分离的目的.但是在光催化制氢过程中,Ag吸附H~+的能力较弱,致使电子与H~+反应的诱导力较弱,使得Ag释放电子的能力较差.因此可以通过提高Ag表面对H~+的吸附强度,以加速Ag的电子释放,通过表面修饰来提高Ag助剂的光催化活性.研究发现,Ag纳米粒子表面与含硫化合物之间存在很强的亲和力.硫氰根离子(SCN~–)具有很强的电负性,容易吸附溶液中H~+离子,并且也易吸附在Ag纳米粒子的表面.因此可以利用Ag与SCN~–的作用来增强Ag释放电子的能力.本文采用光还原法将Ag沉积在g-C_3N_4半导体材料表面,然后通过在制氢牺牲剂中加入KSCN溶液,利用SCN~-与Ag的亲和力来提高光生电子参与光催化反应的效率.结果表明,在SCN~-存在的情况下,g-C_3N_4/Ag的光催化制氢性能显著提高.当制氢溶液中SCN~–浓度为0.3 mmol L~(–1)时,材料的光催化制氢性能达最大,为3.89μmol h~(–1),比g-C_3N_4/Ag性能提高5.5倍.基于少量的SCN~–就能明显提高g-C_3N_4/Ag材料的光催化性能,我们提出了一个可能性的作用机理:金属银和SCN~-协同作用,即银纳米粒子作为光生电子的捕获和传输的一种有效的电子传递介质,而选择性吸附在银表面的SCN~-作为界面活性位点有效地吸附溶液中的质子以促进产氢反应,二者协同作用,加速了g-C_3N_4-Ag–SCN~-三物种界面之间电荷的传输、分离及界面催化反应速率,有效抑制了g-C_3N_4主体材料光生电子和空穴的复合,因而g-C_3N_4/Ag–SCN复合材料的光催化制氢性能提高.考虑到其成本低、效率高,SCN~–助催化剂有很大的潜力广泛应用于制备高性能的银修饰光催化材料.     

Facile Synthesis of Ag/Ag3PO4 Composites with Highly Efficient and Stable Photocatalytic Performance under Visible Light

The Ag/Ag₃PO₄ composites with various shapes (spheres, polyhedral, and microcubes) were synthesized by a facile precipitation method and a subsequent light‐reduction route at room temperature. The as‐prepared Ag/Ag₃PO₄ composites were characterized in detail by X‐ray diffraction, Fourier transform infrared spectra, X‐ray photoelectron spectroscopy, scanning electron microscopy, UV–vis diffuse reflection, and photoluminescence spectroscopy. The growth processes of different morphologies Ag/Ag₃PO₄ composites are also discussed. The decomposition test of rhodamine B (RhB) indicated that the Ag/Ag₃PO₄ composites enhanced the photocatalytic performance compared with pure Ag₃PO₄, which was attributed to the surface plasmon resonance (SPR) of Ag nanoparticles and the stability of the photocatalysts. Moreover, uniform cubes of Ag/Ag₃PO₄ showed the highest photocatalytic activity and could completely degrade RhB in 7 min, which could be primarily ascribed to the cubic structure of Ag/Ag₃PO₄ with strong visible‐light absorption and efficient separation of the photo‐generated electrons and holes. Furthermore, the possible photocatalytic mechanism is also discussed.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Silver(I) complex with 2-amino-4,4α-dihydro-4α,7-dimethyl-3H-phenoxazin-3-one (Phx-1) ligand: crystal structure,vibrational spectra and biological studies

The first metal complex of Phx-1 ligand, bis(2-amino-4,4α-dihydro-4α,7-dimethyl-3H-phenoxazin-3-one)nitratosilver(I), [Ag(Phx-1)₂NO₃], has been obtained and investigated by single crystal X-ray diffraction and vibrational spectroscopy methods. The Ag⁺ is bonded to heterocyclic nitrogen atoms of two organic ligands and one oxygen atom of a nitrate anion. The Phx-1 ligand coordination mode is supported by IR and Raman spectra, interpreted with the help of theoretical DFT studies. The antibacterial activity of the ligand and its Ag(I) complex as well as some reference compounds were screened against Gram-positive and Gram-negative bacteria, applying microdilution procedures. High sensitivity to the studied complex was found for Rhodococcus erythropolis and Bacillus licheniformis strains. Modified Phx-1 ligand preparation procedures are also presented.