非视线紫外光大气传输模型的建立及验证

基于蒙特卡罗方法建立了非视线紫外光传输模型。利用此模型模拟了不同传输距离、不同发射和接收仰角等多种传输条件下的传输情况,并在同等条件下进行了相关实验。结果表明,在相同条件下,信号强度模拟曲线与实验曲线的变化趋势相同且吻合较好,但具有一定的误差。进一步分析指出,模型中大气散射系数、吸收系数、分子散射比、传输测试距离等参数的误差影响了模拟结果的准确,以及模拟与实验曲线的吻合程度。     

热处理和紫外辐射对DNA影响的拉曼光谱研究

检测了鲕鱼精ＤＮＡ纤维和经过４０℃，９１℃，２００℃加热处理的拉曼光谱。研究结果表明，在熔融温度以下热处理对ＤＮＡ构象的影响是轻微的，在熔融温度以上则随温度的升高，对ＤＮＡ分子结构的影响有破坏也逐渐加剧，首先受影响的是腺嘌呤和脱氧核糖。     

固溶体半导体ZnS1-xTex(0≤x≤1)多晶薄膜的制备及特性研究

ZnS1-xTex是制作短波长光波段光电子器件和紫外探测器的理想材料。本文介绍了ZnS1-xTex多晶薄膜的真空蒸镀制备情况，并用原子力显微镜、X射线衍射仪、能量色散谱仪、紫外．可见分光光度计、荧光光谱分析仪等对制备的多晶薄膜的性质进行了测试和分析，发现该多晶薄膜保持了单晶薄膜的紫外吸收、光致发光等良好特性。     

滤紫外和红外光的荧光玻璃的研制及其应用

研制出了掺铈、钐的滤紫外和红外光的硼硅酸盐荧光玻璃，测试了该玻璃的吸收光谱和荧光谱，并用其做了固体激光器工作物质的紫外和红外滤光套，能使激光效率提高２５％－５０５，从而促进固体激光器的微型化和实用化。     

双波段紫外光合成维生素D3实验研究

报道了双波段紫外光照射7脱氢胆甾醇合成维生素D₃的放大实验研究,发现它与激光两步照射合成法产物随时间变化曲线非常相似,维生素D₃的前身P₃的转化率约为61%,远高于传统的高压汞灯连续照射的产率.     

Investigation of shrinkage-induced stresses in stereolithography photo-curable resins

An experimental study has been undertaken to investigate the shrinkage characteristics of acrylic-based and epoxy-based stereolithography (SL) photopolymer resin systems after they have been laser cured and post-cured under ultraviolet (UV), and thermal exposure. The induced residual stresses and strains were determined by the shadow moiré and the hole-drilling strain-gage methods. Out-of-plane displacements (warpage) of acrylic-based post-cured resin plates were recorded by means of the shadow moiré method and correlated to the shrinkage strains by theoretical analysis. The induced residual stresses in the epoxy-based cylindrical resin specimens were determined from strains of three-element strain-gage rosettes of the blind-hole drilling method. Results are presented for the shrinkage stresses and strains for both material systems as a function of the post-curing process (UV, thermal). It was found that the shrinkage strains in the acrylic-based photopolymer resin were of considerable magnitude, while thermal post-curing resulted in higher shrinkage stresses for both material systems. The values of the shrinkage stresses compare well with those of the existing literature.     

Tuning the energy gap of conjugated polymer zwitterions for efficient interlayers and solar cells

Narrow band gap conjugated polymer zwitterions (CPZs) were synthesized by Suzuki polymerization and characterized to understand their electronic properties and utility as cathode modification layers in solar cells. The polymers were prepared from diketopyrrolopyrrole (DPP) and iso-indigo monomers containing sulfobetaine (SB) pendant groups, benefiting from an ion-rich aqueous phase in the polymerizations. UV–vis absorption spectroscopy revealed the optical energy gap value for the CPZs, ranging from 1.7 to 1.2 eV. Ultraviolet photoelectron spectroscopy of the CPZs as thin layers on Ag metal showed that the pendent zwitterions impart an interfacial dipole (Δ) to the metal and a work function reduction of ∼0.9 eV. OPVs fabricated using a conventional bulk heterojunction (BHJ) device architecture of ITO/PEDOT:PSS/(PTB7:PC₇₁BM)/CPZ/Ag led to dramatic improvements in power conversion efficiency (PCE) values relative to devices having bare Ag cathodes (PCE < 2% for bare Ag vs. 6.7–7.7% for CPZ/Ag). The benzothiadiazole (BT)/DPP polymer denoted as PT₂BTDPPSB gave an optimal PCE of 7.7% in a conventional BHJ OPV device architecture fabricated on a Ag cathode. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 327–336     

离子色谱法-间接紫外检测离子液体中三种含氟酸根阴离子

建立了离子色谱-间接紫外检测法同时分析离子液体中的三氟乙酸根(CF3COO-)、四氟硼酸根(BF4-)和三氟甲烷磺酸根(CF3SO3-)的方法。用Shodex IC NI-424阴离子交换柱作为分离柱,探讨了影响上述三种离子保留和检测的因素及其保留规律。最终选用色谱条件为:以1.75 mmol·L-1邻苯二甲酸-1.68 mmol·L-1三(羟甲基)氨基甲烷为淋洗液,柱温45℃,流速1.0 m L·min-1,UV检测波长设定在265 nm。在此条件下,可实现上述三种阴离子的同时分析,且色谱峰形良好。所测阴离子的检出限(S/N=3)为0.39~1.57 mg·L-1,保留时间和峰面积的相对标准偏差(n=5)均在1%以下。将此方法应用于测定离子液体中的三氟乙酸根、四氟硼酸根及三氟甲烷磺酸根,加标回收率为99%~102%。该方法简单、准确、可靠,具有较好的实用性。     

超声萃取-高效液相色谱法同时测定人造革中7种苯并三唑类紫外线吸收剂含量

建立了超声萃取-高效液相色谱法(HPLC)同时测定人造革中7种苯并三唑类紫外线吸收剂UV-P、UV-326、UV-327、UV-329、UV-350、UV-320和UV-328含量的方法。该方法以甲醇为萃取溶剂,超声萃取人造革中的苯并三唑类紫外线吸收剂,萃取液经处理后直接进行HPLC分析,外标法定量。在信噪比(S/N)=3的条件下,UV-P、UV-326、UV-327、UV-329、UV-350的检出限均为0.05mg/kg,UV-320、UV-328的检出限均为0.10 mg/kg。在3个不同加标浓度水平下,各组分的平均加标回收率为88.19%~98.32%,相对标准偏差(RSD)为0.61%~3.74%。该方法简便快捷、灵敏度高,可用于人造革中苯并三唑类紫外线吸收剂的测定。采用该方法对市售人造革样品进行测定,结果在6个样品中检出了不同浓度水平的UV-P和UV-329。     

水杨酸钠紫外分光光度法测定烟草中的总氮

建立水杨酸钠紫外分光光度法测定烟草中总氮含量的方法。烟草样品经硫酸铜–硫酸钾–浓硫酸消化,用水杨酸钠–二氯异氰尿酸钠显色后用紫外分光光度计检测,并对波长、显色剂用量和反应时间等实验条件进行了优化。总氮的质量浓度在5~60 mg/L范围内与其吸光度呈良好的线性关系,线性相关系数为0.998 8,方法的检出限为0.14 mg/L。样品分析结果的相对标准偏差为3.22%(n=6),样品加标回收率为99.30%~101.62%。该方法具有较高的精密度和准确度,尤其适用于样品量少时对烟草中总氮的测定。