Travelling, non-periodic patterns in nonlinear stability problems

In this short note we present results on the existence of several classes of travelling, non-periodic solutions of the complex Ginzburg-Landau equation. First we give a very short introduction to the G-L equation and show its importance in nonlinear stability theory. We then study the G-L equation with complex coefficients and establish the existence of a 2-parameter family of quasi-periodic solutions and two different types of one-parameter families of heteroclinic orbits; all members of these families travel with a well-defined wave-speed. The heteroclinic solutions correspond to (travelling) soliton-like localized structures which connect different (stable) periodic patterns. Mathematically, these families of travelling solutions (quasi-periodic and heteroclinic) are continuations into the complex case of the stationary solutions of the real G-L equation.     

Solitons in Josephson junctions: An overview

The dynamics of the Josephson tunnel junction is approximately described by a perturbed sine-Gordon equation. The Josephson tunnel junction is thus a convenient experimental solid state device for the study of solitons and solitonlike phenomena. The physical manifestation of the soliton is a propagating magnetic flux quantum ( ₀=h/2e=2.064×10^–15 V sec). Basic properties of the soliton and its relation to observable experimental quantities (zero field steps, microwave radiation, etc.) are reviewed. Recent direct measurements of the actual soliton profile are also mentioned.     

Partial Molar Volumes and Partial Molar Adiabatic Compressibilities of Fe(III) Tetrafluoroborate Complexes with DMSO, Pyridine, and Pyridine Derivatives

The apparent and limiting apparent molar volumes of dilute aqueous solutions of KBF₄, and the complexes [Fe(DMSO)₆](BF₄)₃, [Fe(Py)₄(H₂O)₂](BF₄)₃, [Fe(4-Mepy)₂(H₂O)₂](BF₄)₃, and [Fe(4-Etpy)₂(H₂O)₂](BF₄)₃ were determined from density data measured at 5, 15, and 25°C. The apparent and limiting apparent molar adiabatic compressibilities of these complexes were determined from ultrasonic sound velocities measured at the same temperatures in dilute aqueous solutions. The volume change associated with complex formation is discussed in terms of the nature of the coordinate bond and also the role of the central metal atom and ligands in the solvation behavior of these complexes.     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

Shock-wave equation-of-state studies at Los Alamos

A history of the shock-wave equation-of-state (EOS) studies at Los Alamos is given. Particular emphasis is placed on the pioneering research in the 1950s where many of the experimental techniques and methods of analysis were developed, which we now take for granted. A brief review of shock-wave physics is given, which illustrates important hydrodynamic and thermodynamic concepts. Recent studies on the EOS of Ti are presented with emphasis on the-to- phase transition. VISAR wave profiles for polycrystalline Ni and singlecrystal Ni are presented to determine the strengths of these materials under pressure. Low-density polystyrene foam Hugoniot experiments are described and results analyzed.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

超声辐射下一步法合成2-氨基-3-氰基-4-芳基-7，7-二甲基-5-氧代-5，6，7，8-四氢-4H-苯并[b]吡喃

芳醛、丙二腈和5，5-二甲基-1，3-环己二酮在乙二醇中不加任何催化剂经超 声辐射5-7min得2-氨基-3-氰基-4-芳基-7，7-二甲基-5-氧代-4H-5，6，7，8-四氢 苯并[b]吡喃，产率88％—96％．     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.