Radiometric observations of the 752.033-GHz rotational absorption line of H2O from a laboratory jet

The intensity and lineshape of the Doppler-broadened 752.033-GHz (2₁₁ 2₀₂) rotational transition of H₂O has been studied passively using a high-resolution two-stage heterodyne radiometer with single-sideband system noise temperature of 45,000 K. The purpose of the experiments was to demonstrate the observability at submillimeter wavelengths of a high-altitude rocket plume simulated by a laboratory H₂O jet in a vacuum chamber. First-stage mixing was accomplished by means of a GaAs Schottky diode with first local-oscillator power supplied by a CO₂-laser pumped formic-acid laser (761.61 GHz), generating and X-band IF signal. Second localoscillator power was provided by a tunable C-band source. One-MHz resolution capability was obtained by means of a 3-GHz waveguide cavity filter with only 9-dB insertion loss. In the H₂O jet experiments, the center frequency of the line was determined to within 1 MHz of the previously reported value. A rotational temperature 75 K, a linewidth 5 MHz, and a Doppler shift 3 MHz (from a 45-degree rotation of the flow direction) were measured with the line-of-sight intersecting the jet axis at a distance downstream of 30 nozzle diameters. These absorption data were ogtained against continuum background radiation sources at temperatures of 1175 and 300 K.     

Bonding, structure, and energetics of gaseous E8(2+) and of solid E8(AsF6)2 (E = S, Se)

The attempt to prepare hitherto unknown homopolyatomic cations of sulfur by the reaction of elemental sulfur with blue S8(AsF6)2 in liquid SO2/SO2ClF, led to red (in transmitted light) crystals identified crystallographically as S8(AsF6)2. The X-ray structure of this salt was redetermined with improved resolution and corrected for librational motion: monoclinic, space group P2(1)/c (No. 14), Z = 8, a = 14.986(2) A, b = 13.396(2) A, c = 16.351(2) A, beta = 108.12(1) degrees. The gas phase structures of E8(2+) and neutral E8 (E = S, Se) were examined by ab initio methods (B3PW91, MPW1PW91) leading to delta fH theta[S8(2+), g] = 2151 kJ/mol and delta fH theta[Se8(2+), g] = 2071 kJ/mol. The observed solid state structures of S8(2+) and Se8(2+) with the unusually long transannular bonds of 2.8-2.9 A were reproduced computationally for the first time, and the E8(2+) dications were shown to be unstable toward all stoichiometrically possible dissociation products En+ and/or E4(2+) [n = 2-7, exothermic by 21-207 kJ/mol (E = S), 6-151 kJ/mol (E = Se)]. Lattice potential energies of the hexafluoroarsenate salts of the latter cations were estimated showing that S8(AsF6)2 [Se8(AsF6)2] is lattice stabilized in the solid state relative to the corresponding AsF6- salts of the stoichiometrically possible dissociation products by at least 116 [204] kJ/mol. The fluoride ion affinity of AsF5(g) was calculated to be 430.5 +/- 5.5 kJ/mol [average B3PW91 and MPW1PW91 with the 6-311 + G(3df) basis set]. The experimental and calculated FT-Raman spectra of E8(AsF6)2 are in good agreement and show the presence of a cross ring vibration with an experimental (calculated, scaled) stretching frequency of 282 (292) cm-1 for S8(2+) and 130 (133) cm-1 for Se8(2+). An atoms in molecules analysis (AIM) of E8(2+) (E = S, Se) gave eight bond critical points between ring atoms and a ninth transannular (E3-E7) bond critical point, as well as three ring and one cage critical points. The cage bonding was supported by a natural bond orbital (NBO) analysis which showed, in addition to the E8 sigma-bonded framework, weak pi bonding around the ring as well as numerous other weak interactions, the strongest of which is the weak transannular E3-E7 [2.86 A (S8(2+), 2.91 A (Se8(2+)] bond. The positive charge is delocalized over all atoms, decreasing the Coulombic repulsion between positively charged atoms relative to that in the less stable S8-like exo-exo E8(2+) isomer. The overall geometry was accounted for by the Wade-Mingos rules, further supporting the case for cage bonding. The bonding in Te8(2+) is similar, but with a stronger transannular E3-E7 (E = Te) bonding. The bonding in E8(2+) (E = S, Se, Te) can also be understood in terms of a sigma-bonded E8 framework with additional bonding and charge delocalization occurring by a combination of transannular n pi *-n pi * (n = 3, 4, 5), and np2-->n sigma * bonding. The classically bonded S8(2+) (Se8(2+) dication containing a short transannular S(+)-S+ (Se(+)-Se+) bond of 2.20 (2.57) A is 29 (6) kJ/mol higher in energy than the observed structure in which the positive charge is delocalized over all eight chalcogen atoms.     

Factors affecting propagating fronts of addition polymerization: Velocity,front curvature,temperatue profile,conversion, and molecular weight distribution

Several properties of propagating fronts of addition polymerization were studied. A power function could be fit to the velocity dependence on initiator concentration, but not with the exponents predicted by current models or in agreement with other published work. Bubbles from the volatile by-products of initiator decomposition were found to affect the front velocity and curvature. The front velocity for triethylene glycol dimethacrylate polymerization was found to depend linearly on temperature over a moderate range. The conversion of methacrylic acid in fronts varied greatly with initiator type and concentration. Benzoyl peroxide produced much lower conversion than t-butyl peroxide, but fronts with tBPO propagated slower. A dual initiator system of BPO and tBPO produced rapidly propagating fronts with good conversion but the contribution of each initiator to the velocity was not additive. The possibility of chain branching was considered. The apparent molecular weight distributions were very broad, often trimodal, and found to depend on initiator type and concentration as well as the tube diameter. The temperature profiles were measured and found to be very sharp for BPO and broader for tBPO but both had front temperatures in excess of 200°C, indicating a high ceiling temperature. © 1995 John Wiley & Sons, Inc.     

Rovibrational and energetic analysis of the hydroxyethynyl anion (CCOH−)

For the first time, high-level structural and rovibrational data are provided for the hyroxyethynyl anion, CCOH^?. CCOH^? is a promising molecule for interstellar detection even though no new anions have been observed in the interstellar medium for the past half-decade. The large dipole moment of the corresponding neutral radical may be key for its creation as has been hypothesised and supported for other anions known to exist in various astronomical environments. Highly accurate quartic force fields are employed where previous benchmarks have produced spectroscopic constants and anharmonic vibrational frequencies within 20 MHz and 1 cm^?1, respectively, of experiment. This same approach is applied here for CCOH^? and its deuterated isotopologue with the goal of assisting laboratory experiments and/or astronomical observers in the potential detection of this anion.     

Vibrational frequencies and spectroscopic constants from quartic force fields for cis-HOCO: the radical and the anion

The use of accurate quartic force fields together with vibrational configuration interaction recently predicted gas phase fundamental vibrational frequencies of the trans-HOCO radical to within 4 cm(-1) of experimental results for the two highest frequency modes. Utilizing the same approach, we are providing a full list of fundamental vibrational frequencies and spectroscopic constants for the cis-HOCO system in both radical and anionic forms. Our predicted geometrical parameters of the cis-HOCO radical match experiment and previous computation to better than 1% deviation, and previous theoretical work agrees equally well for the anion. Correspondence between vibrational perturbation theory and variational vibrational configuration interaction for prediction of the frequencies of each mode is strong, better than 5 cm(-1), except for the torsional motion, similar to what has been previously identified in the trans-HOCO radical. Among other considerations, our results are immediately applicable to dissociative photodetachment experiments which initially draw on the cis-HOCO anion since it is the most stable conformer of the anion and is used to gain insight into the portion of the OH + CO potential surface where the HOCO radical is believed to form, and we are also providing highly accurate electron binding energies relevant to these experiments.     

Supporting disciplinary and interdisciplinary knowledge development and design thinking in an informal,pre‐engineering program: A Workplace Simulation Project

In this paper, we examined students’ engagement in an implementation of a Workplace Simulation Project (WSP). The WSP was designed to actively engage students in learning disciplinary content by inviting engineers from industry to have a physical presence within the school building to collaborate with teachers and students to complete projects which simulate the tasks authentic to their work. We focus on the first year implementation of the program that partnered a high school in the rural Midwest with an engineering unit of a government organization. Using a multiple methods study design, we analyzed disciplinary and interdisciplinary pre and posts test along with students’ interviews to determine learning gains as well as students’ interpretations of creative and critical thinking as experienced in the project and their knowledge of the engineering design process. Effect sizes showed that students in the WSP group had notable gains over the control group participants. Additionally, students’ knowledge of core elements of the design process were identified in inductive analyses of the interviews. Findings from this study will provide usable knowledge about effective ways to support systems and design thinking and ways to support expert‐novice collaboration to ensure success.     

Laboratory-scale mirrors for submillimeter wavelengths

A machining procedure based on an elementary concept has been applied successfully to produce metal mirrors suitable for submillimeter wavelengths. Ninety-degree off-axis paraboloidal or ellipsoidal mirror sections may be cut from brass or aluminum by means of a series of predetermined increments on a conventional laboratory lathe. Paraboloidal mirrors with low f-numbers (f/2) made by this technique have been used with good results as part of the collecting optics of a submillimeter-wave heterodyne radiometer.     

Submillimeter-wave heterodyne spectroscopy with a compact solid state radiometer

A compact, solid state submillimeter-wave heterodyne radiometer has been developed and was used to measure spectral characteristics of a water vapor jet in a space simulation chamber. Features of the 557 GHz water vapor line profile were observed in significantly greater detail than in previous experiments through an increased sensitivity and improved frequency resolution (600 kHz). The local oscillator of the radiometer consisted of a frequency multiplication chain which was driven by an InP Gunn oscillator at 92.6 GHz, and which contained a frequency tripler and harmonic mixer in cascade. The front end of the receiver had a noise temperature of 4500 K (DSB) at 555 GHz, consumed 3 W and weighed 3 kg. This advance in technology is particularly relevant to submillimeter-wave radiometry from a space-based platform.