空腹式刚架拱桥梁拱节点三维光弹性试验研究

福州市尤溪洲闽江大桥是国内首座在拱肋（圈）上不设立柱和斜撑的空腹式刚架拱桥．作为空腹式刚架拱桥受力关键部位——梁与拱的连接部位，受力及构造复杂．通过三维光弹性试验，研究该梁、拱结合部的内力传递、应力集中、局部应力分布规律，为空腹式刚架拱桥节点设计、施工提供依据．     

基于经典光学方法的物体表面微观结构的三维成像

设计了基于经典光学方法的物体表面微观结构的三维成像实验装置以及相应计算程序,从记录不同角度平行光照射下的物体表面照度出发,经图片处理后得到物体表面的三维立体结构.     

激光辐照下复合材料树脂基热分解3维温度场模型

 采用控制体积法,从质量和能量守恒角度,推导了激光辐照下复合材料树脂基热分解时温度变化的基本方程。用多步模型描述树脂的热分解反应。提出了热分解气体的1维运动假设,这使得可以在3维情况下考虑热分解气体对流传输的影响,且在不引入力学量的前提下实现3维温度场模型的封闭。考虑到树脂基复合材料的各向异性,对部分分解材料的导热率计算公式进行了推导,并重新推导了部分分解材料对激光的吸收系数计算公式。在一定的简化下,推导的能量守恒方程与文献结果一致。     

有限尺寸方靶等离子体离子注入动力学的三维粒子模拟研究

采用三维粒子模拟模型研究了有限尺寸方靶等离子体浸没离子注入过程中的鞘层动力学行为,得到了鞘层尺寸和方靶表面的注入剂量、注入能量以及注入角度等信息,并与二维无限长方靶注入结果进行了对比.模拟结果表明,与无限长方靶不同,有限尺寸方靶周围鞘层很快扩展为球形,但鞘层厚度明显减小.在模拟的50ω^-1_pi时间尺度内靶表面注入剂量很不均匀,中心区域注入剂量最小,四个边角附近位置注入剂量最大.这种剂量不均匀性是由于鞘层扩展为球形,使得鞘层内离子被聚焦并注入到边角附 关键词： 等离子体浸没离子注入 数值模拟 三维粒子模拟 有限尺寸方靶     

A flexible fast 3D profilometry based on modulation measurement

This paper proposes a flexible fast profilometry based on modulation measurement. Two orthogonal gratings through a beam splitter are vertically projected on an object surface, and the measured object is placed between the imaging planes of the two gratings. Then the image of the object surface modulated by the orthogonal gratings can be obtained by a CCD camera in the same direction as the grating projection. This image is processed by the operations consisting of performing the Fourier transform, spatial frequency filtering and inverse Fourier transform. Using the modulation distributions of two grating patterns, we can reconstruct the 3D shape of the object. In the measurement process, we only need to capture one fringe pattern, so it is faster than the MMP and remains the advantages of it. In the article, the principle of this method, the setup of the measurement system, some simulations and primary experiment results are given. The simulative and experimental result proves it can restore the 3D shape of the complex object fast and comparatively accurate. Because only one fringe pattern is needed in the testing, our method has a promising extensive application prospect in real-time acquiring and dynamic measurement of 3D data of complex objects.     

Single fringe projection profilometry based on sinusoidal intensity normalization and subpixel fitting

A novel fringe projection profilometry using a single sinusoidal fringe pattern projected is proposed. Computer-generated sinusoidal fringe and uniform intensity patterns are firstly projected on a testing object by a liquid crystal display projector. The variable reflection intensity of a fringe pattern is then roughly normalized by division operation applied to the grabbed fringe and uniform intensity patterns projected. Fringe intensity is further normalized by employing an interpolation algorithm. The deformed sinusoidal pattern encoding object shape is converted to a wrapped phase map without using phase-shifting or Fourier transform. Computer simulation and experimental performance are evaluated to demonstrate the validity of the proposed method. The experimental results compared with those of the four-step phase-shifting and fast Fourier transform methods are also presented.     

S变换轮廓术中消除条纹非线性影响的方法

S变换是短时傅里叶变换和小波变换的延伸和推广,是一种无损可逆的非平稳信号时频分析方法.它不仅具有线性、多分辨性和逆变换唯一性等特点,而且其反变换与傅里叶变换保持着直接的联系.在S变换中,以简谐波作为基波,以可以同时进行伸缩和平移的高斯函数作为窗函数.同短时傅里叶变换相比,S变换的时频分辨率可以同时达到最佳,同小波变换相...     

基于特征面片的复杂型面轮廓视觉测量方法

提出一种基于特征面片的复杂型面轮廓三维视觉测量方法.该方法包括多模式局部特征检测与匹配、特征面片集初始化、膨胀、滤波等重构过程,其输入是已标定的立体图像,输出是覆盖表面的可视稠密面片集.该方法不需要目标和场景的任何初始边界信息,能够自动检测和抛弃外部点和缺失部分;不需要对邻域特征进行任何平滑处理,仅需通过局部单演特征一...     

三维成像中相位级次自编码的相位测量方法

提出一种相位级次自编码技术的相位测量方法.与传统的相位测量技术不同,该方法利用截断相位的微分值作为编码通道,完成对各条纹级次的编码.构造的代码序列总长度为投影条纹的周期数,每个周期作为一个码元,由相邻若干码元构成一个代码子序列.相位计算后,根据截断相位的微分信息,可以提取出各周期及其码元值,通过在设计的代码序列中进行代...