Fabrication of Large‐Scale Hierarchical ZnO Hollow Spheroids for Hydrophobicity and Photocatalysis

We report here the preparation of a crystalline, pure hexagonal phase of ZnO as hollow 500–800 nm spheroids in the presence of organic bases, such as pyridine, using zinc acetate as the precursor salt. The spheroids exhibit unique 3D hierarchical architectures, like cocoons, and demonstrate improved superhydrophobic (water contact angle, 150°) character due to the inherited air‐trapped capillarity within the cocoon structure. The simple synthetic strategy used in this process is modified hydrothermolysis (MHT), which represents a general approach and may contribute to the formation mechanism of the hollow nanostructures with highly improved porosity. Depending on the concentration of the precursor salt, it has been possible to cover glass plates or the inner wall of a reaction vessel with ZnO nanocrystals. A low salt concentration (<0.01 M ) allows the easy preparation of a superhydrophobic glass surface, whereas a high salt concentration (>0.01 M ) results in the precipitation of cocoons at the bottom of the reaction vessel as a solid mass together with a deposited thin film of ZnO nanocrystals covering the inner wall of the glass vessel. The thickness of the film successively grows through repetitive hydrothermolysis processes for which a low salt concentration (<0.01 M ) was employed. Because of the hollow cocoonlike morphology, the surface area of the film is greatly increased, which makes it accessible for functionalization by incoming substrates from both sides (internally and externally) and helps to drive a competent photocatalytic dye degradation pathway. The heterocyclic base pyridine exclusively develops cocoons. Thus, the mechanism of self‐aggregation of ZnO nanocrystals under MHT reaction conditions has been studied and the characterization of the compounds has been supported with physical measurements.     

堆焊熔敷层表面纳米晶层摩擦磨损性能研究

用预压力滚压技术在堆焊修复层表面制备纳米晶层.利用TEM、SEM分析技术研究表面纳米晶层微观结构,利用CETR-3型多功能摩擦磨损试验机考察在干摩擦条件下堆焊层表面纳米晶层的摩擦磨损性能.结果表明堆焊修复层表面经表面纳米化处理后,表面形成厚度约为10μm(晶粒尺寸小于100 nm)的纳米晶层,最表面层平均晶粒尺寸约为10 nm.纳米压痕试验表明纳米晶层的硬度提高,最表面纳米晶层的硬度约为原始堆焊层硬度的3倍.与原始堆焊试样相比,表面纳米化试样的摩擦系数降低了10%,磨损体积降低了25%~30%左右.表面纳米化样品的磨损机制由原始堆焊层的磨粒磨损和黏着磨损转变为磨粒磨损,分析表明晶粒细化导致的高硬度、低塑性是摩擦磨损性能改善和磨损机制改变的主要原因.     

新型Salen型配合物的合成和表征及轴向配位热力学

采用金属模板法合成了四个新型Salen型单、双核金属配合物,并用元素分析、核磁共振(1HNMR)、电喷雾质谱(ESI-MS)、傅里叶变换红外光谱(FT-IR)等手段进行了表征.使用紫外-可见(UV-Vis)光谱滴定法和圆二色(CD)光谱研究了主体金属镍配合物与咪唑类含氮小分子的轴向配位反应热力学性质.结果表明:主体与咪唑(Im)和N-甲基咪唑(N-MeIm)的配位数是2,而与2-Et-4-MeIm和2-MeIm的配位数是1;轴配体系的热力学数据显示主体与咪唑类配体的平衡常数按K苓(Im)K苓(N-MeIm)K苓(2-Et-4-MeIm)K苓(2-MeIm)顺序依次减小;测得的△rHm苓和△rSm苓数据表明该轴向配位反应为放热、熵增加过程.     

刚性衬底上铜铟硒纳米棒阵列的合成与表征

在覆盖有钨电极的硅衬底上利用多孔阳极氧化铝模板为生长掩膜电沉积合成垂直排列的铜铟硒纳米棒阵列. 多孔阳极氧化铝模板由阳极氧化磁控溅射制备的铝膜制成. 扫描电子显微镜结果表明,该纳米棒阵列结构致密,直径约100 nm长度约1μm,纵横比为10. X射线衍射、微区拉曼光谱和高分辨透射电子显微镜结果表明,真空条件下450 oC退火处理的铜铟硒纳米棒是多晶纯相的黄铜矿结构的铜铟硒,在纳米棒轴向方向上有比较大的晶粒尺寸. 能量色散X射线光谱表明,铜铟硒纳米棒的化学组成接近InSe₂的化学计量比,由吸收光谱分析推算铜铟硒纳米棒带隙为0.96 eV.     

AlN纳米线宏观阵列的制备

借助二次模板法成功的合成了AlN纳米线宏观阵列,并进行了表征.主要研究CVD法制备有一定取向,直径均匀的AlN纳米线宏观阵列的过程.通过气相沉积法和利用PS球自组装模板制备了金属纳米颗粒模板;再以模板上的金属纳米颗粒作为催化剂,利用化学气相沉积在模板上合成AlN纳米线宏观阵列.借助SEM,TEM观察所得样品,AlN纳米线阵列面积约为0.3 mm×0.2 mm,直径和长度分布均匀,平均直径约为41 nm,平均长度为1.8 μm左右,分散密度和覆盖率大的六角结构AlN纳米线宏观阵列.得到了可控制备AlN纳米线 关键词： AlN纳米线阵列 模板法 CVD法 SEM     

基于剪枝信任度传播的手写体目标形状匹配方法

手写体识别中,目标形状的匹配是较为重要的工作.为了提高手写体目标形状的匹配速度,提出一种新的匹配方法.由于手写体目标形状的几何先验知识已知,并可以采用少量的参数进行表示,新方法采用参数化可变形模板匹配目标形状,确定其后验概率模型,并定义剪枝信任度空间,依据信任度传播算法的特性,首次将剪枝信任度传播算法应用于求解可变形模板与目标形状之间的最佳匹配.实验结果显示,在灰度图像中,对手写体目标形状的轮廓检测与定位速度显著提高.提出将剪枝信任度传播方法应用于手写体目标形状的匹配工作,能够使得目标形状填补空白,应用于相关性较为稀疏的图模型中.     

Progress in liquid crystalline dispersions: Cubosomes

Dispersed particles of bicontinuous cubic liquid crystalline phase, cubosomes, are self-assembled nanostructured particles that can be formed in aqueous lipid and surfactant systems. Contributions to cubosome research have come from the fields of biology, material science, medicine, and mathematics and much is known about their formation and properties. At the center of much of the discovery and innovation is the technique of cryo-transmission electron microscopy. Most of the research into cubosomes is motivated by potential applications in drug delivery and material synthesis although no commercialized product based on cubosomes is known. Recent advances in understanding and use of cubosomes are discussed in the context of some of the more promising application areas and the opportunities for microscopy techniques to make unique contributions to these areas.     

256色模式下调色板的匹配

在计算机屏幕上同时显示两幅颜色相差较大、调色板各异的图像，需要匹配两幅图像的调色板．本文引入了两种匹配算法：颜色中和算法和颜色分类算法，并分别详述这两种算法的基本原理和在２５６色模式下的实现方法．     

Carbon Dioxide Fixation and Sulfate Sequestration by a Supramolecular Trigonal Bipyramid

The subcomponent self‐assembly of a bent dialdehyde ligand and different cationic and anionic templates led to the formation of two new metallosupramolecular architectures: a Fe^II₄L₆ molecular rectangle was isolated following reaction of the ligand with iron(II) tetrafluoroborate, and a M₅L₆ trigonal bipyramidal structure was constructed from either zinc(II) tetrafluoroborate or cadmium(II) trifluoromethanesulfonate. The spatially constrained arrangement of the three equatorial metal ions in the M₅L₆ structures was found to induce small‐molecule transformations. Atmospheric carbon dioxide was fixed as carbonate and bound to the equatorial metal centers in both the Zn₅L₆ and Cd₅L₆ assemblies, and sulfur dioxide was hydrated and bound as the sulfite dianion in the Zn₅L₆ structure. Subsequent in situ oxidation of the sulfite dianion resulted in a sulfate dianion bound within the supramolecular pocket.