氢原子在Ru(0001)表面的化学吸附

用密度泛函理论研究了氢原子的污染对于Ru(0001)表面结构的影响. 通过PAW(projector-augmented wave)总能计算研究了p(1×1)、p(1×2)、(3^(1/2)×3^(1/2))R30°和p(2×2)等几种氢原子覆盖度下的吸附结构, 以及在上述结构下Ru(0001)面fcc(面心立方)格点和hcp(六方密堆)格点的氢原子吸附. 所得结果表明, 在p(1×1)-H、p(1×2)-H、(3^(1/2)×3^(1/2))R30°-H和p(2×2)-H几种H原子覆盖度下, 以p(1×1)-H结构单个氢原子吸附能为最大. 在p(1×1)-H吸附结构下,由于氢原子吸附导致的Ru(0001) 表面第一层Ru 原子收缩的理论计算数值分别为-1.11%(hcp 吸附)和-1.55%(fcc 吸附), 因此实际上最有可能的情况是两种吸附方式都有一定的几率. 而实验中观察到的“清洁”Ru(0001)表面实际上是有少量氢原子污染的表面. 不同覆盖度和氢分压下氢原子吸附的污染对Ru(0001)表面结构有极大的影响,其表面的各种特性都会随覆盖度的不同而产生相应的变化.     

Redox and Conformational Equilibria and Dynamics of Cytochrome c at High Electric Fields

Cytochrome c (Cyt‐c) adsorbed in the electrical double layer of the Ag electrode/electrolyte interface has been studied by stationary and time‐resolved surface‐enhanced resonance Raman spectroscopy to analyse the effect of strong electric fields on structure and reaction equilibria and dynamics of the protein. In the potential range between +0.1 and ?0.55 V (versus saturated calomel electrode), the adsorbed Cyt‐c forms a potential‐dependent reversible equilibrium between the native state B1 and a conformational state B2. The redox potentials of the bis‐histidine‐coordinated six‐coordinated low‐spin and five‐coordinated high‐spin substates of B2 were determined to be ?0.425 and ?0.385 V, respectively, whereas the additional six‐coordinated aquo‐histidine‐coordinated high‐spin substate was found to be redox‐inactive. The redox potential for the conformational state B1 was found to be the same as in solution in agreement with the structural identity of the adsorbed B1 and the native Cyt‐c. For all three redox‐active species, the formal heterogeneous electron transfer rate constants are small and of the same order of magnitude (3–13 s^?1), which implies that the rate‐limiting step is largely independent of the redox‐site structure. These findings, as well as the slow and potential‐dependent transitions between the various conformational (sub‐)states, can be rationalized in terms of an electric field‐induced increase of the activation energy for proton‐transfer steps linked to protein structural reorganisation. Further increasing the electric field strength by shifting the electrode potential above +0.1 V leads to irreversible structural changes that are attributed to an unfolding of the polypeptide chain.     

Surface Modification of Colloidal Silica by Sulfonation Route for Super-Hydrophilicity

Colloidal silica was chemically modified by a two-step method including an olefin sulfonation route as a preliminary study for super-hydrophilic applications. The hydrophobic vinyl groups were initially bonded chemically to the hydroxylated silica surface using the trichlorosilane coupling agents. The vinyl-terminated silica was then sulfonated by addition reaction with chlorosulfonic acid. The modified silica was investigated using DRIFT, TGA, element analysis, solid-state ²⁹Si- and ¹³C CP-MAS NMR. The vinyl-terminated specimen showed a characteristic IR absorption band at 1600 cm^–1 and a weight loss of approximately 3% starting at 350°C while the ²⁹Si NMR peaks at 70.9 and 79.8 ppm and ¹³C NMR at 136 ppm and 129.8 ppm were assigned to a vinyl group bonded to silica. Elemental analysis of the sulfonated silica indicated the presence of sulfur, carbon and hydrogen. Thermal decomposition in range 150–600°C was due to the presence of sulfonated organics and unreacted vinyl groups while the new signals on ¹³C NMR, which were in the range 70–15 ppm, were assigned to sulfonated carbons.     

Preparation and characterization of bismaleimide/1,3-dicyanatobenzene modified epoxy intercrosslinked matrices

An intercrosslinked network of cyanate ester (CE)-bismaleimide (BMI) modified epoxy matrix system was made by using epoxy resin, 1,3-dicyanatobenzene and bismaleimide (N,N^′-bismaleimido-4,4^′-diphenyl methane) with diaminodiphenylmethane as curing agent. BMI-CE-epoxy matrices were characterised using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. The matrices, in the form of castings, were characterised for their mechanical properties such as tensile strength, flexural strength and unnotched Izod impact test as per ASTM methods. Mechanical studies indicated that the introduction of cyanate ester into epoxy resin improves the toughness and flexural strength with reduction in tensile strength and glass transition temperature, whereas the incorporation of bismaleimide into epoxy resin influences the mechanical and thermal properties according to its percentage content. DSC thermograms of cyanate ester as well as BMI modified epoxy resin show an unimodal reaction exotherm. Electrical properties were studied as per ASTM method and the morphology of the BMI modified epoxy and CE-epoxy systems were studied by scanning electron microscope.     

Effect of surface condition on liquid crystal photoalignment by light-induced azo dye adsorption phenomena

The effect of surface condition on the photoalignment of light-induced methyl red (MR) adsorption phenomena on various substrates based on azo dye-doped liquid crystals is investigated. The results show that the polar surface energy determines the initiation of MR adsorption phenomena. The surface polarity energy of different substrates, which are modulated by oxygen plasma treatment (OPT), is further examined using the sessile drop method. The results also indicate that the uniformity and efficiency of MR adsorption can be enhanced by OPT. Light intensity influences the MR adsorption rate. The uniformity of MR adsorption onto various substrates is analysed via polarised optical microscopy.     

Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.     

On a class of dependent Sparre Andersen risk models and a bailout application

In this paper a one-dimensional surplus process is considered with a certain Sparre Andersen type dependence structure under general interclaim times distribution and correlated phase-type claim sizes. The Laplace transform of the time to ruin under such a model is obtained as the solution of a fixed-point problem, under both the zero-delayed and the delayed cases. An efficient algorithm for solving the fixed-point problem is derived together with bounds that illustrate the quality of the approximation. A two-dimensional risk model is analyzed under a bailout type strategy with both fixed and variable costs and a dependence structure of the proposed type. Numerical examples and ideas for future research are presented at the end of the paper.     

Effect of an electric field on defects in a nematic liquid crystal with variable surface anchoring

We report experimental studies on defects in a nematic liquid crystal with negative dielectric anisotropy mounted in a cell with perfluoropolymer-coated surfaces. The sample exhibits a discontinuous anchoring transition from planar to homeotropic on cooling at zero or a small electric field, and above a cross-over voltage a continuous ‘inverse Freedericksz transition’, at which the director starts tilting in opposite directions at the two surfaces. Defects of strength ±1/2 are either annihilated or expelled when the director tilts. On the other hand, disclination lines of ±1 which end in partial point defects (boojums) at the surfaces in the planar alignment regime acquire point defects of strength ±1 at the midplane of the cell when the director tilts. At a low enough temperature, the homeotropic anchoring becomes strong, and an electric field above the Freedericksz threshold generates the usual umbilic defects, which follow the dynamic scaling laws found in earlier studies.