考虑行车状态的一维元胞自动机交通流模型

在Nagel Schrekenberg单车道元胞自动机交通流模型（简称NS模型）的基础上，考虑车辆之间的相对运动薛郁等提出了一种改进的单车道元胞自动机交通流模型（简称改进的NS模型）.通过两种情况列出了改进的NS模型存在不尽周严的地方，随之在新模型中引入了行车状态 变量和反馈规则，从而控制车辆出现倒车和刹车过急等现象.通过计算机对新模型进行模拟 ，发现减速概率和车流密度对车流状态的演化影响很大，当减速概率高（如道路条件差）时 ，即使车流密度低，车流也会出现局部堵塞状态；而当减速概率一定时，随着车流密度增加 ，车流的运动相与堵塞相发生了全局性的交替出现，此时类似于波的波峰和波谷的传播.与 改进的NS模型相比较，新模型模拟的车流量较高，说明新模型减少了车流的总体停滞状态. 关键词： 交通流 元胞自动机 行车状态 反馈规则     

Optical resonator for high-power transverse flow CO2 lasers

A new design of the U-type resonator is described. In this way, a laser beam with symmetrical intensity profile (regarding to a symmetry plane) can be extracted from an active medium that exhibits gain asymmetry along one of the transverse directions. The whole area of the active medium cross-section can be used, and consequently the laser efficiency will be increased. This resonator structure was applied for efficiency power extraction (as a low order TEM modes laser beam) from a DC excited transverse flow CO₂ laser with cylindrical geometry. Although the cross-section area of the discharge was entirely used (including the cathode fall region), a symmetrical intensity profile of the laser beam (regarding to the two orthogonal symmetry planes) was obtained in the near field as well as in the far field; the gain asymmetry along the flow direction was compensated by the gas circulation fluidodynamical circuit with two counterflowing discharge channels. A double-U optical resonator was introduced in order to provide a laser beam with axial symmetry.For the practical construction of these two types of optical resonators we have developed two new types of 90° deflection elements: the first one, which does not reverse the image (and which has the properties of the pentaprism), and the second one, which rotates the image with 90° angle. Both elements exhibit good focusability if they are equipped with two concave mirrors.     

Multimode squeezed states produced by a confocal parametric oscillator

We investigate the spatial behaviour of the quantum-noise-reduction spectrum of the vacuum state emitted by a degenerate optical parametric oscillator below threshold. In view of possible experimental implementations, we consider a mode-degenerate resonator and two matching lenses and show that, for the realistic case of a finite-width pump, significant level of squeezing can be observed in a very small region of the beam. Received 25 September 2002 Published online 11 February 2003     

双侧进气突扩燃烧室内液雾燃烧的数值模拟

本文采用全双流体模型对部分切向进气管式双侧进气突扩燃烧室内的液雾燃烧过程进行了数值模拟，将液雾群按初始尺寸分组，数值模拟结果表明不同尺寸液雾的蒸发及燃烧过程显著不同，小尺寸的液雾是先蒸发后燃烧，而较大尺寸的液雾则是边蒸发边燃烧．模拟结果还表明，部分切向进气方式有利于在燃烧室的头部产生大面积的中心回流区，该回流区的存在有利于加强混合及火焰稳定．     

Chaos,transport and mesh convergence for fluid mixing

Chaotic mixing of distinct fluids produces a convoluted structure to the interface separating these fluids. For miscible fluids （as considered here）, this interface is defined as a 50% mass concentration isosurface. For shock wave induced （Richtmyer-Meshkov） instabilities, we find the interface to be increasingly complex as the computational mesh is refined. This interfacial chaos is cut off by viscosity, or by the computational mesh if the Kolmogorov scale is small relative to the mesh. In a regime of converged interface statistics, we then examine mixing, i.e. concentration statistics, regularized by mass diffusion. For Schmidt numbers significantly larger than unity, typical of a liquid or dense plasma, additional mesh refinement is normally needed to overcome numerical mass diffusion and to achieve a converged solution of the mixing problem. However, with the benefit of front tracking and with an algorithm that allows limited interface diffusion, we can assure convergence uniformly in the Schmidt number. We show that different solutions result from variation of the Schmidt number. We propose subgrid viscosity and mass diffusion parameterizations which might allow converged solutions at realistic grid levels.     

G-spaces and Fixed Point Sets

For a compact connected group G, in a compact free G-space M every closed subset is the fixed point set of an autohomeomorphism if the weight of M is not bigger than that of G. In a compact group with nonsingleton components, every closed subset is the fixed point set of an autohomeomorphism if and only if the weight of the whole group is not bigger than that of the component of the identity.     

RHIC能区Au+Au碰撞中集合径向流的研究

利用相对论量子分子动力学模型RQMD,对RHIC能区s=200A GeV Au+Au碰撞的集体膨胀效应进行了研究,对散射粒子的横质量谱进行了分析.研究表明,在RHIC能区的重离子反应中存在有强的集合径向流.对单粒子谱的拟合结果给出Au+Au的源冻结温度为160MeV,平均径向流速度为0.6c.     

Energy relaxation method for chemical non‐equilibrium flow computations

In this paper, an algorithm for chemical non‐equilibrium hypersonic flow is developed based on the concept of energy relaxation method (ERM). The new system of equations obtained are studied using finite volume method with Harten–Lax–van Leer scheme for contact (HLLC). The original HLLC method is modified here to account for additional species and split energy equations. Higher order spatial accuracy is achieved using MUSCL reconstruction of the flow variables with van Albada limiter. The thermal equilibrium is considered for the analysis and the species data are generated using polynomial correlations. The single temperature model of Dunn and Kang is used for chemical relaxation. The computed results for a flow field over a hemispherical cylinder at Mach number of 16.34 obtained using the present solver are found to be promising and computationally (25%) more efficient. The present solver captures physically correct solution as the entropy conditions are satisfied automatically during the computations. Copyright © 2007 John Wiley & Sons, Ltd.     

Modelling the effects of emergent vegetation on an open‐channel flow using a lattice model

A two‐dimensional lattice model has been developed to describe the influence of vegetation on the turbulent flow structure in an open channel. The model includes the influence of vegetation density on the frictional effect of the channel bed and walls. For the walls, a semi‐slip boundary condition has been considered as an alternative to overcome the no‐slip boundary condition limitations in turbulent flows. The drag stress exerted by the flow on the vegetation as well as the gravity effect has also been taken into account. The proposed lattice model has been used to simulate the experimental results reported from the study of the influence of alternate vegetated zones on the open‐channel flow. The results show that the lattice model approach is a valid tool for describing these kinds of flows. Copyright © 2007 John Wiley & Sons, Ltd.     

Flow-through solid-phase based optical sensor for the multisyringe flow injection trace determination of orthophosphate in waters with chemiluminescence detection

In this work, a novel flow-through solid-phase based chemiluminescence (CL) optical sensor is described for the trace determination of orthophosphate in waters exploiting the multisyringe flow injection analysis (MSFIA) concept with multicommutation. The proposed time-based injection flow system relies upon the in-line derivatisation of the analyte with ammonium molybdate in the presence of vanadate, and the transient immobilisation of the resulting heteropolyacid in a N-vinylpyrrolidone/divinylbenzene copolymer packed spiral shape flow-through cell located in front of the window of a photomultiplier tube. The simultaneous injection of well-defined slugs of luminol in alkaline medium and methanol solution towards the packed reactor is afterwards performed by proper switching of the solenoid valves. Then, the light emission from the luminol oxidation by the oxidant species retained onto the sorbent material is readily detected. At the same time, the generated molybdenum-blue compound is eluted by the minute amount of injected methanol, rendering the system prepared for a new measuring cycle. Therefore, the devised sensor enables the integration of the solid-phase CL reaction with elution and detection of the emitted light without the typical drawbacks of the molybdenum-blue based spectrophotometric procedures regarding the excess of molybdate anion, which causes high background signals due to its self-reduction. The noteworthy features of the developed CL-MSFIA system are the feasibility to accommodate reactions with different pH requirements and the ability to determine trace levels of orthophosphate in high silicate content samples (Si/P ratios up to 500). Under the optimised conditions, a dynamic linear range from 5 to 50 μg P l⁻¹ for a 1.8 ml sample, repeatability better than 3.0% and a quantification limit of 4 μg P l⁻¹ were attained. The flowing stream system handles 11 analysis h⁻¹ and has been successfully applied to the determination of trace levels of orthophosphate in environmental samples such as mineral, ground, tap and pond waters as well as samples from a water-steam cycle of an incineration plant. The t-test comparison of the means for the developed optical sensor and the molybdenum-blue spectrophotometric APHA/AWWA/WPCF reference method revealed that there is no evidence of significant differences between the obtained results at the 95% confidence level.