Direct Cyclopropanation of α-Cyano β-Aryl Alkanes by Light-Mediated Single Electron Transfer Between Donor–Acceptor Pairs

Cyclopropanes are traditionally prepared by the formal [2+1] addition of carbene or radical based C1 units to alkenes. In contrast, the one-pot intermolecular cyclopropanation of alkanes by redox active C1 units has remained unrealised. Herein, we achieved this process simply by exposing β-aryl propionitriles and C1 radical precursors (N-oxy esters) to base and blue light. The overall process is redox-neutral and a photocatalyst, whether metal- or organic-based, is not required. Our findings support that single electron transfer (SET) from the α-cyano carbanion of the propionitrile to the N-oxy ester is facilitated by blue-light via their electron donor–acceptor (EDA) complex. The α-cyano carbon radical thus formed can then lose a β-proton to form a π-resonance stabilised radical anion that preferentially couples at the benzylic β-position with a decarboxylated C1 radical unit. This new transition metal-free chemistry tolerates both electron rich and electron deficient (hetero)aryl systems, even sulfide or alkene functionality, to afford a range of cis-aryl/cyano cyclopropanes bearing congested tetrasubstituted quaternary carbons.     

奈韦拉平与铬天青S的电荷转移反应及其测定

确定了奈韦拉平与铬天青S的电荷转移反应条件,同时建立了测定奈韦拉平的分光光度法。奈韦拉平与铬天青S在水和丙酮混合溶剂中发生电荷转移反应,常温下反应30min后可比色。电荷转移络合物的最大吸收波长是578nm,表观摩尔吸光系数为1.78×104L·mol-1·cm-1。奈韦拉平质量浓度在1～16μg·mL-1范围内服从比耳定律,相关系数为0.9993。当奈韦拉平浓度为6μg·mL-1时,六次测定结果的相对标准偏差为1.61%。测得荷移络合物的组成和稳定常数分别为1∶1和1.73×104。本方法用于测定制剂中奈韦拉平的含量,结果与文献方法一致,回收率在98.0%以上。     

The Use of Derivative Thermogravimetry to Estimate Degree of Thermal Degradation

It is difficult to estimate the degree of thermal degradation which has taken place in complex parts composed of cellulosics and polymeric insulation unless complete failure has occurred. There is a definite need for a parameter which can quickly and easily measure the relative degree of thermal attack on organic insulation subjected to various known environmental and processing conditions. This paper reports preliminary work using derivative thermogravimetry to perform this function. Derivative thermogravimetric analysis (TGA) was used to produce a value, TGA Index, related to the peak height of the major TGA derivative signal. This TGA Index was found to correlate with the copper number of insulating paper measured after thermal degradation. The application of TGA Index to evaluation of polymer degradation after thermal shock, water absorption, and accelerated UV attack is also discussed. Finally, preliminary studies on the use of derivative TGA to evaluate coatings exposed to various outdoor environments around the country are reported.     

Functional Monomers and Polymers. 145. Synthetic Application Based on the Tautomerism of Polymer-Bound Purine and Pyrimidine Bases

Polymer-bound alkylthiopurine and -pyrimidine bases were prepared and used as the polymeric reagents for the reactions of nitrile, olefin, and enone formation. The corresponding low molecular weight compounds were also prepared for comparison. Differences in the reactivity of these reagents were related to the change in tautomerism of the purine and pyrimidine moieties.     

Siloxyaluminate and Siloxygallate Complexes as Models for Framework and Partially Hydrolyzed Framework Sites in Zeolites and Zeotypes

Anionic molecular models for nonhydrolyzed and partially hydrolyzed aluminum and gallium framework sites on silica, M[OSi(OtBu)₃]₄⁻ and HOM[OSi(OtBu)₃]₃⁻ (where M=Al or Ga), were synthesized from anionic chlorides Li{M[OSi(OtBu)₃]₃Cl} in salt metathesis reactions. Sequestration of lithium cations with [12]crown-4 afforded charge-separated ion pairs composed of monomeric anions M[OSi(OtBu)₃]₄⁻ with outer-sphere [([12]crown-4)₂Li]⁺ cations, and hydroxides {HOM[OSi(OtBu)₃]₃} with pendant [([12]crown-4)Li]⁺ cations. These molecular models were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, mass spectrometry and NMR spectroscopy. Upon treatment of monomeric [([12]crown-4)Li]{HOM[OSi(OtBu)₃]₃} complexes with benzyl alcohol, benzyloxide complexes were formed, modeling a possible pathway for the formation of active sites for Meerwin–Ponndorf–Verley (MPV) transfer hydrogenations with Al/Ga-doped silica catalysts.     

Attapulgite grafted with polystyrene via a simultaneous reverse and normal initiation atom transfer radical polymerization

The surface grafting of attapulgite (ATP) with polystyrene (PS) was established via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NIATRP). 4‐(chloromethyl)phenyltrimethoxysilane (CMPTMS) chemical bounded on the surface of ATP (ATP‐Cl, Cl‐I) was prepared via one‐step self‐assembly. SR&NI ATRP of styrene was conducted using CuCl₂ complex tris(2‐(dimethylamino)ethyl)amine (Me₆‐TREN) as the catalytic system, initiated by 2,2‐azobis(isobutyronitrile) (AIBN) and ATP‐Cl. FT‐IR, XRD, XPS, TGA and TEM data were consistent with the grafting of benzyl chloride groups and PS chains on ATP surface. The controllability of polymerization was investigated by the kinetics behavior under different molar ratio of AIBN and CuCl₂. The obtained polymer possessed a uniform distribution of molecular weights with a lower polydispersity index of 1.2～1.4. The relationship between polymerization on the surface of ATP and in solution was discussed in detail based on TGA data of hybrid particles and GPC trace of free polymer in solution. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1508–1516     

Sloshing waves in a heated viscoelastic fluid layer in an excited rectangular tank

In this paper, we have investigated the motion of a heated viscoelastic fluid layer in a rectangular tank that is subjected to a horizontal periodic oscillation. The mathematical model of the current problem is communicated with the linearized Navier–Stokes equation of the viscoelastic fluid and heat equation together with the boundary conditions that are solved by means of Laplace transform. Time domain solutions are consequently computed by using Durbin's numerical inverse Laplace transform scheme. Various numerical results are provided and thereby illustrated graphically to show the effects of the physical parameters on the free-surface elevation time histories and heat distribution. The numerical applications revealed that increasing the Reynolds number as well as the relaxation time parameter leads to a wider range of variation of the free-surface elevation, especially for the short time history.     

Solution behavior of polyimide‐graft‐polystyrene copolymers in selective solvents

A polyimide‐graft‐polystyrene (PI‐g‐PS) copolymer with a polyimide backbone and polystyrene side chains was synthesized by the “grafting from” method using styrene polymerization on a polyimide multicenter macroinitiator via ATRP mechanism. The side chain grafting density z = 0.86 of PI‐g‐PS is rather high for graft‐copolymers synthesized by the ATRP method. Molecular characteristics and solution behavior of PI‐g‐PS were studied in selective solvents using light scattering and viscometry methods. In all solvents, the backbone tends to avoid contact with a poor solvent. To describe the conformation and hydrodynamic properties of PI‐g‐PS macromolecules in thermodynamically good solvents for side chains and PI‐g‐PS, the wormlike spherocylinder model is used. Macromolecules of the studied graft‐copolymer are characterized by high equilibrium rigidities (Kuhn segment length >20 nm). In Θ‐conditions, PI‐g‐PS macromolecules may be modeled by a rigid prolate ellipsoid of revolution with a low asymmetry form and a collapsed backbone as the ellipsoid core. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1539–1546     

Intramolecular Nitrene Insertion into Saturated C−H-Bond-Mediated C−N Bond Cleavage of a Coordinated NHC Ligand

Ruthenium(II) complexes bearing a tridentate bis(N-heterocyclic carbene) ligand reacted with iminoiodanes (PhI=NR) resulting in the formation of isolable ruthenium(III)–amido intermediates, which underwent cleavage of a C−N bond of the tridentate ligand and formation of an N-substituted imine group. The Ru^III–amido intermediates have been characterized by ¹H NMR, UV/Vis, ESI-MS, and X-ray crystallography. DFT calculations were performed to provide insight into the reaction mechanism.     

Ultrafast study of inter‐ and intrachain energy transfer in a core–polymer

Interchain interactions can play a positive role in reaching amplified spontaneous emission in an interesting core–polymer system where the donor (side chains) and the acceptor (core) are chemically linked together. Different degree of interchain interactions modifies the photophysical characteristics of the polymer. By means of transient absorption spectroscopy we show that the stimulated emission from the core decreases passing from solid state to concentrated solution and it is almost absent in the diluted solution. The conformational rearrangements of the core–polymer chain in solution limits the efficiency of the intrachain Förster energy transfer mechanism. The free chain rotations decrease the exciton hopping along the conjugated chains, the ratio between donor and acceptor moieties in the polymer, and change the relative orientation of the transition dipoles of the donor and acceptor causing a strong decrease of energy transfer efficiency and subsequently of the gain. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 965–969