“Click” synthesis of thermally stable au nanoparticles with highly grafted polymer shell and control of their behavior in polymer matrix

Thermally stable core–shell gold nanoparticles (Au NPs) with highly grafted polymer shells were synthesized by combining reversible addition‐fragmentation transfer (RAFT) polymerization and click chemistry of copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). First, alkyne‐terminated poly(4‐benzylchloride‐b‐styrene) (alkyne‐PSCl‐b‐PS) was prepared from the alkyne‐terminated RAFT agent. Then, an alkyne‐PSCl‐b‐PS chain was coupled to azide‐functionalized Au NPs via the CuAAC reaction. Careful characterization using FT‐IR, UV–Vis, and TGA showed that PSCl‐b‐PS chains were successfully grafted onto the Au NP surface with high grafting density. Finally, azide groups were introduced to PSCl‐b‐PS chains on the Au NP surface to produce thermally stable Au NPs with crosslinkable polymer shell ( Au‐PSN₃‐b‐PS 1 ). As the control sample, PS‐b‐PSN₃‐coated Au NPs ( Au‐PSN₃‐b‐PS 2 ) were made by the conventional “grafting to” approach. The grafting density of polymer chains on Au‐PSN₃‐b‐PS 1 was found to be much higher than that on Au‐PSN₃‐b‐PS 2 . To demonstrate the importance of having the highly packed polymer shell on the nanoparticles, Au‐PSN₃‐b‐PS 1 particles were added into the PS and PS‐b‐poly(2‐vinylpyridine) matrix, respectively. Consequently, it was found that Au‐PSN₃‐b‐PS 1 nanoparticles were well dispersed in the PS matrix and PS‐b‐P2VP matrix without any aggregation even after annealing at 220 °C for 2 days. Our simple and powerful approach could be easily extended to design other core–shell inorganic nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of nanocomposites by reversible addition‐fragmentation chain transfer polymerization from the surface of quantum dots in miniemulsion

Herein, we report the synthesis of quantum dots (QDs)/polymer nanocomposites by reversible addition‐fragmentation chain transfer (RAFT) polymerization in miniemulsions using a grafting from approach. First, the surfaces of CdS and CdSe QDs were functionalized using a chain transfer agent, a trisalkylphosphine oxide incorporating 4‐cyano‐4‐(thiobenzoylsulfanyl)pentanoic acid moieties. Using a free radical initiator (AIBN) to activate the RAFT process, a polystyrene (PS) block was grafted from the surface of the QDs. Quantum confinement effects were identified for the nanocomposite obtained, so attesting to the integrity of the QDs after the polymerization. Free PS chains were also present in the final nanocomposite, indicating that the RAFT polymerization from the surface of the QDs was accompanied by conventional free radical polymerization. After isolating the nanocomposite particles, a second poly(n‐butyl acrylate) block was tentatively grown from the initial PS block. The first results indicated a successful polymerization of the second polymer and show the potential of the current strategy to prepare block copolymers from the surface of the RAFT‐modified QDs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5367–5377, 2009     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

Grafting of methacrylates and styrene on to polystyrene backbone via a “grafting from” ATRP process at ambient temperature

Well defined graft copolymers are prepared by “grafting from” atom transfer radical polymerization (ATRP) at room temperature (30 °C). The experiments were aimed at grafting methacrylates and styrene at latent initiating sites of polystyrene. For this purpose, the benzylic hydrogen in polystyrene was subjected to allylic bromination with N‐bromosuccinimide and azobisisobutrylnitirle to generate tertiary bromide ATRP initiating sites (Br? C? PS). The use of Br? C? PS with lesser mol % of bromide initiating groups results in better control and successful graft copolymerization. This was used to synthesize a series of new graft copolymers such as PS‐g‐PBnMA, PS‐g‐PBMA, PS‐g‐GMA, and PS‐g‐(PMMA‐b‐PtBA) catalyzed by CuBr/PMDETA system, in bulk, at room temperature. The polymers are characterized by GPC, NMR, FTIR, TEM, and TGA. Graft copolymerization followed by block polymerization enabled the synthesis of highly branched polymer brush, in which the grafting density can be adjusted by appropriate choice of bromide concentration in the polystyrene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3818–3832, 2007     

Synthesis and polymerization of styrene monomer carrying isothiocyanate moiety and its copolymerization with HEMA based on chemo‐selectivity to nucleophiles

Isothiocyanate is a very useful functional group for post‐polymerization modification by the reaction with amine or alcohol. An isothiocyanate monomer, 4‐vinylbenzyl isothiocyanate, was synthesized from 4‐vinylbenzyl chloride without using any harmful reagents such as thiophosgene and CS₂. The obtained monomer was successively polymerized by the conventional radical polymerization (AIBN, 1,4‐dioxane, 60 °C) to afford the corresponding polymer. The obtained polymer was characterized by ¹H NMR, FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry. In contrast to the isocyanate group, the isothiocyanate group was relatively tolerant to alcohols, and this character enabled us to synthesize a copolymer of 4‐vinyl benzylisothiocyanate and (2‐hydroxyethyl methacrylate). The copolymer is transformed into networked polymer by 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as a promoter of the reaction between isothiocyanate and alcohol to afford thiocarbamate. The formation of networked polymer was characterized by FTIR and TGA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5215–5220     

Synthesis of polymethacrylate‐bearing benzocyclobutene structure and extension to networked polymer based on thermal isomerization

1‐Benzocyclobutenyl methacrylate‐bearing methacrylate (BCBMA) backbone has been synthesized, and radical polymerization of the monomer was performed by utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as initiator to result poly‐BCBMA. Differential scanning calorimetry (DSC) measurement of the derived poly‐BCBMA revealed the lowering of thermal isomerization temperature from that of nonsubstituted benzocyclobutene. The thermal decomposition temperature of BCBMA before and after thermal treatment was confirmed by thermogravimetric analysis (TGA). The results of the TGA observation did not show significant difference in both 5% and 10% weight loss temperature (T_d5 and T_d10). This result suggests that the thermal conversion of the poly‐BCBMA to the networked polymer take place without thermal decomposition of the main chain based on the methacrylate framework. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2175–2180     

A Copper-Based Reverse ATRP Process for the Living Radical Polymerization of 4-Vinylpyridine: Discussion on Optimum Reaction Conditions

In this original experiment, reverse atom transfer radical polymerization technique using CuCl₂/hexamethyl tris[2-(dimethylamino)ethyl]amine (Me₆-TREN) as catalyst complex was applied to living radical polymerization of 4-vinylpyridine (4VP) with azobisisobutyronitrile (AIBN) as initiator. N,N-Dimethylformamide was used as solvent to improve the solubility of the reaction system. The polymerization not only showed the best control of molecular weight and its distribution, but also provided a rather rapid reaction rate with the molar ratio of [4VP]:[AIBN]:[CuCl₂]:[Me₆-TREN] = 400:1:2:2. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 51.5 kJ· mol¹. Use of Cl as the halogen in copper halide had many advantages over the use of Br. The resulting poly(4-vinylpyridine) was successfully used as the macroinitiator to proceed the block polymerization of styrene in the presence of CuCl/Me₆-TREN catalyst complex via a conventional ATRP process in DMF.     

Poly(vinylphosphonate)s functionalized polymer microspheres via rare earth metal‐mediated group transfer polymerization

We demonstrate a facile, yet efficient method for the functionalization of crosslinked polystyrene (PS) microspheres with biocompatible poly(vinylphosphonate)s via the combination of a UV grafting polymerization and a surface‐initiated group transfer polymerization. Self‐initiated photografting and photopolymerization of ethylene glycol dimethacrylate results in direct photografting of poly(ethylene glycol dimethacrylate) on the PS microspheres with dangling methacrylate functionalities, which are used to immobilize ytterbocene complexes to form the surface‐bound rare‐earth metal catalyst system. The surface‐initiated GTP of dialkyl vinylphosphonates from the initiator system leads to the functionalization of PS microspheres with poly(vinylphosphonate) brushes. Polymerization kinetic investigation indicates that surface‐initiated GTP leads to a constant and remarkably rapid weight gain of the microsphere (a microsphere weight increase of 600% within 3 min), owing to the highly living and efficient character of GTP. The surface‐initiated GTP occurring inside the microsphere causes an accumulation of the tension between the polymer chains in the microsphere, which eventually induces fracture of the microsphere for longer polymerization time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2919–2925     

Effective grafting of polymers onto ultrafine silica surface: Photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface and Mn2(CO)10

The effective grafting of vinyl polymers onto an ultrafine silica surface was successfully achieved by the photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface with Mn₂(CO)₁₀ under UV irradiation at 25 °C. The introduction of trichloroacetyl groups onto the surface of silica was achieved by the reaction of trichloroacetyl isocyanate with surface amino groups, which were introduced by the treatment of silica with 3‐aminopropyltriethoxysilane. During the polymerization, the corresponding polymers were effectively grafted onto the surface, based on the propagation of polymer from surface radicals formed by the interaction of trichloroacetyl groups and Mn₂(CO)₁₀. The percentage of poly(methyl methacrylate) grafting onto the silica reached 714.6% after 90 min. The grafting efficiency (proportion of grafted polymer to total polymer formed) in the polymerization of methyl methacrylate was very high, about 80%, indicating the depression of formation of ungrafted polymer. Polymer‐grafted silica gave a stable colloidal dispersion in good solvents for grafted polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2157–2163, 2001     

Preparation and characterization of heteroarm H‐shaped terpolymers by combination of reversible addition‐fragmentation transfer polymerization and ring‐opening polymerization

Heteroarm H‐shaped terpolymers, [(poly(L ‐lactide))(polystyrene)]poly(ethylene oxide)[(polystyrene)(poly(L ‐lactide))], [(PLLA)(PS)]PEO[(PS)(PLLA)], in which PEO acts as a main chain and PS and PLLA as side arms, have been successfully prepared via combination of reversible addition–fragmentation transfer (RAFT) polymerization and ring‐opening polymerization (ROP). The first step is the synthesis of the PEO capped with one terminal dithiobenzoate group and one hydroxyl group at every chain end, [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] from the reaction of carboxylic acid with ethylene oxide. Then, the RAFT polymerization of styrene (St) was carried out using [(HOCH₂)(PhC(S)S)]PEO[(S(S)CPh)(CH₂OH)] as RAFT agent and AIBN as initiator, and the triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], was formed. Finally, the heteroarm H‐shaped terpolymers, [(PLLA)(PS)]PEO[(PS)(PLLA)], were produced by ROP of LLA, using triblock copolymer, [(HOCH₂)(PS)]PEO[(PS)(CH₂OH)], as macroinitiator and Sn(Oct)₂ as catalyst. The target products and intermediates were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 789–799, 2007     

Synthesis and characterization of novel phosphonated and sulfonated poly(styrene–isobutylene–styrene) for fuel cell and protective clothing applications

A novel aromatic block–graft copolymer of sulfonated poly(styrene–isobutylene–styrene)‐graft‐poly(vinyl phosphonic acid) (SIBS‐g‐PVPA SO₃H) was synthetized for direct methanol fuel cell (DMFC) and chemical and biological protective clothing (CBPC) applications. The polystyrene (PS) blocks of SIBS were chloromethylated via a Friedel–Crafts reaction to obtain the macroinitiator SIBS‐CH₂Cl. Atom transfer radical polymerization (ATRP) was performed to graft VPA to the chloromethylated groups of the macroinitiator and yield SIBS‐g‐PVPA, which was subsequently sulfonated using acetyl sulfate as the sulfonating agent. After each functionalization step, a membrane was prepared by using the solvent casting technique. The final membrane was composed of triblock SIBS as the backbone, PVPA grafts attached to the chloromethylated PS end blocks and sulfonic groups in the non‐chloromethylated PS units. A comprehensive materials characterization study (e.g., GPC, FTIR, TGA, EA) was performed to confirm proper functionalization of each material. Unique ionic interactions (i.e., crosslinking via formation of sulfonate–phosphonium complexes) arose between the phosphonic and sulfonic groups (i.e., PO₃H₂ and SO₃H, respectively) that enhanced the water absorption capabilities, thermal and oxidative stability, and the transport properties of SIBS. The SIBS‐g‐PVPA SO₃H membrane presented high Nafion ® normalized selectivity and separation efficiency, indicating that this ionomer adequately functions for both applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1424–1435     

Reversible addition–fragmentation chain‐transfer graft polymerization of styrene: Solid phases for organic and peptide synthesis

The γ‐initiated reversible addition–fragmentation chain‐transfer (RAFT)‐agent‐mediated free‐radical graft polymerization of styrene onto a polypropylene solid phase has been performed with cumyl phenyldithioacetate (CPDA). The initial CPDA concentrations range between 1 × 10^?2 and 2 × 10^?3 mol L^?1 with dose rates of 0.18, 0.08, 0.07, 0.05, and 0.03 kGy h^?1. The RAFT graft polymerization is compared with the conventional free‐radical graft polymerization of styrene onto polypropylene. Both processes show two distinct regimes of grafting: (1) the grafting layer regime, in which the surface is not yet totally covered with polymer chains, and (2) a regime in which a second polymer layer is formed. Here, we hypothesize that the surface is totally covered with polymer chains and that new polymer chains are started by polystyrene radicals from already grafted chains. The grafting ratio of the RAFT‐agent‐mediated process is controlled via the initial CPDA concentration. The molecular weight of the polystyrene from the solution (PS_free) shows a linear behavior with conversion and has a low polydispersity index. Furthermore, the loading of the grafted solid phase shows a linear relationship with the molecular weight of PS_free for both regimes. Regime 2 has a higher loading capacity per molecular weight than regime 1. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4180–4192, 2002     

Surface modification of polystyrene latex particles via atom transfer radical polymerization

The atom transfer radical polymerization (ATRP) technique using the copper halide/ N,N′,N′,N″,N″‐pentamethyldiethylenetriamine complex was applied to the graft polymerization of methyl methacrylate and methyl acrylate on the uniform polystyrene (PS) seed particles and formed novel core‐shell particles. The core was submicron crosslinked PS particles that were prepared via emulsifier‐free emulsion polymerization. The crosslinked PS particles obtained were transferred into the organic phase (tetrahydrofuran), and surface modification using the chloromethylation method was performed. Then, the modified seed PS particles were used to initiate ATRP to prepare a controlled poly(methyl methacrylate) (PMMA) and poly(methyl acrylate) (PMA) shell. The final core‐shell particles were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and elementary analysis. The grafting polymerization was conducted successfully on the surface of modified crosslinked PS particles, and the shell thickness and weight ratio (PMMA and PMA) of the particles were calculated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 892–900, 2002; DOI 10.1002/pola.10160     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

PS/PMMA mixed polymer brushes on the surface of clay layers: Preparation and application in polymer blends

Polystyrene (PS) and poly(methyl methacrylate) (PMMA) mixed polymer brushes on the surface of clay layers were prepared by using in situ free radical polymerization. Free radical initiator molecules with two quaternary ammonium groups at both ends were intercalated into the interlayer spacing of clay layers. The amount of polymer brushes grafted on the surface of clay layers can be controlled by controlling the polymerization time. Thermogravimetric analysis, X‐ray diffraction, and high‐resolution transmission electron microscope results indicated successful preparation of the mixed polymer brushes on the surface of clay layers. The kinetics of the grafting of the monomers was also studied. The mixed polymer brushes on the surface of clay layers were used as compatibilizers in blends of PS and PMMA. In the blends, the intercalated clay particles tend to locate at the interface of two phases reducing the interfacial tension. In the meanwhile, PMMA homopolymer chains tend to intercalate into clay layers. The driving force for the intercalation is the compatibility between homo‐PMMA chains and PMMA brushes on the surface of clay layers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5329–5338, 2007     

A facile strategy to modify TiO2 nanoparticles via surface‐initiated ATRP of styrene

A core‐shell hybrid nanocomposites, possessing a hard core of nano titanium dioxide (n‐TiO₂) and a soft shell of brushlike polystyrene (PS), were successfully prepared by surface‐initiated atom transfer radical polymerization (ATRP) at 90 °C in anisole solution using CuBr/PMDETA as the catalyst, in the presence of sacrificial initiator. FTIR, ¹H NMR, XPS, TEM, SEM, TGA, and DSC were used to determine the chemical structure, morphology, thermal properties, and the grafted PS quantities of the resulting products. TEM images of the samples provided direct evidence for the formation of a core‐shell structure. The thermal stabilities of the grafted polymers were dramatically elevated relative to that of pristine PS according to TGA results. DSC results demonstrated that the TiO₂‐PS nanocomposites exhibited higher glass transition temperature (T_g) compared with pristine PS. The molecular weights of the free polymers formed by sacrificial initiator, which were similar to that of surface‐attached polymers were measured by GPC instrument which showed that the molecular weights of PS were well controlled with a relatively narrow polydispersity index (PDI < 1.2). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1782–1790, 2010     

Oxidative coupling polymerization of 2,3‐dihydroxynaphthalene with dinuclear‐type copper(II) catalyst

The oxidative coupling polymerization of 2,3‐dihydroxynaphthalene with the novel dinuclear‐type copper(II) catalysts successfully produced poly(2,3‐dihydroxy‐1,4‐naphthylene). For example, the MeOH‐insoluble polymer with a number average molecular weight of 4.4 × 10³ from the polymerization using the complex of CuCl₂ and N,N′‐bis(2‐morpholinoethyl)‐p‐xylylenediamine ( p ‐ 1 ) at room temperature under an O₂ atmosphere followed by acetylation of the hydroxyl groups was obtained in 63% yield. The structures of the tetraamine ligands and the counter anion of the copper(II) salts significantly influenced the catalyst activity. The polymerization of 2,2′‐dimethoxy‐1,1′‐binaphthalene‐3,3′‐diol with the 2CuCl₂‐ p ‐ 1 catalyst, however, resulted in a lower yield. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1635–1640, 2005     

Reverse atom transfer radical solution polymerization of methyl methacrylate under pulsed microwave irradiation

The reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out under pulsed microwave irradiation (PMI) at 69 °C with N,N‐dimethylformamide as a solvent and with azobisisobutyronitrile (AIBN)/CuBr₂/tetramethylethylenediamine as an initiation system. PMI resulted in a significant increase in the polymerization rate of RATRP. A 10.5% conversion for a polymer with a number‐average molecular weight of 34,500 and a polydispersity index of 1.23 was obtained under PMI with a mean power of 4.5 W in only 52 min, but 103 min was needed under a conventional heating process (CH) to reach a 8.3% conversion under identical conditions. At different [MMA]₀/[AIBN]₀ molar ratios, the apparent rate constant of polymerization under PMI was 1.5–2.3 times larger than that under CH. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3823–3834, 2002     

Synthesis of ABCD 4‐miktoarm star polymers by combination of RAFT,ROP, and “Click Chemistry”

The ABCD 4‐miktoarm star polymers based on polystyrene (PS), poly(ε‐caprolactone) (PCL), poly(methyl acrylate) (PMA), and poly(ethylene oxide) (PEO) were synthesized and characterized successfully. Using the mechanism transformation strategy, PS with three different functional groups (i.e., hydroxyl, alkyne, and trithiocarbonate), PS‐HEPPA‐SC(S)SC₁₂H₂₅, was synthesized by the reaction of the trithiocarbonate‐terminated PS with 2‐hydroxyethyl‐3‐(4‐(prop‐2‐ynyloxy)phenyl) acrylate (HEPPA) in tetrahydrofuran (THF) solution. Subsequently, the ring‐opening polymerization (ROP) of ε‐caprolactone (CL) was carried out in the presence of stannous(II) 2‐ethylhexanoate and PS‐HEPPA‐SC(S)SC₁₂H₂₅, and then the PS‐HEPPA(PCL)‐SC(S)SC₁₂H₂₅ obtained was used in reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl acrylate (MA) to produce the ABC 3‐miktoarm star polymer, S(PS)(PCL)(PMA) carrying an alkyne group. The ABCD 4‐miktoarm star polymer, S(PS)(PCL)(PMA)(PEO) was successfully prepared by click reaction of the alkyne group on the HEPPA unit with azide‐terminated PEO (PEO‐N₃). The target polymer and intermediates were characterized by NMR, FTIR, GPC, and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6641–6653, 2008     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003