碲氢化钠与胺烷基化苯并三氮唑的反应

碲氢化钠是一个用途广泛的磁试剂,自作为有用的去溴试剂以来,日益受到化学工作者的关注,不断有文献报道它的合成及应用.例如能有效地还原卤代烃、硝基化合物、叠氮化合物和亚胺等.近年来,Katritzky报道了胺烷基化苯并三氮唑衍生物的合成及应用,此衍生物中的苯并三氮唑基是很好的离去基团,易被各种亲核试剂所取代.我们在前文中对硒氢化钠与胺烷基化苯并三氮唑反应生成二苄基二硒醚的合成进行了报道.本文用碲氢化钠与胺烷基化苯并三氮唑反应,结果生成还原产物N-取代胺.     

减压渣油供氢剂减黏裂化研究

减黏裂化作为一种不生成焦炭的热加工方法主要涉及两类化学反应，裂解反应和缩合反应。裂解反应使减压渣油的平均分子量及其胶团直径变小，改善渣油的倾点和黏度；缩合反应使减压渣油及其中间产物中的芳烃、烯烃等缩合成大分子量产物，产生新的胶核，甚至生成焦炭。常规减黏裂化过程中，这两类化学反应主要与反应温度和反应时间有关。在热作用下渣油中的大分子裂解为H／C原子比相对较高的饱和烃自由基和H／C原子比相对较低的芳香性自由基。后者还可失去自身的环烷氢而使其H／C原子比进一步降低。如果体系中有足量的氢化芳烃存在，那么氢化芳烃分子上的活泼氢就可能转移到芳香性自由基的单电子位，将自由基封闭，从而阻止芳香性自由基之间的相互缩合，抑制使分子长大的缩合反应。如果体系中的氢化芳烃含量不足。则热反应体系中就没有足够的活泼氢将芳香性自由基封闭，芳香性自由基缩合反应的几率较高，造成过早地生焦。这种来自渣油分子自身的活泼氢的化学行为与渣油热反应生焦诱导期有一定关系。     

Chiralcel OD-RH手性柱拆分卡维地洛对映体

采用Ch iralcelOD-RH(纤维素3,5-二甲基苯基氨基甲酸酯)手性固定相高效液相色谱法研究了乙腈-高氯酸钠缓冲盐体系对卡维地洛的手性拆分情况,讨论了流动相的各个因素(有机相的种类和比例、缓冲盐浓度、酸度等)对手性拆分的影响。在乙腈-高氯酸钠缓冲盐(pH 5.5,50 mmol/L)的体积比为35∶65的色谱条件下,卡维地洛对映体获得了基线分离。     

Synthesis and structure of anhydrodimers of salicylaldehydes

Anhydrodimers have been synthesized by reactions of salicylaldehyde and 3,5-di-tert-butylsalicylaldehyde with SOCl₂ or PCl₅. A mechanism of condensation has been proposed, and the molecular structure of dibenzo-2,6,9-trioxabicyclo[3.3.1]nona-3,7-diene has been determined by X-ray structural analysis.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1549–1551, August, 1995.The work was supported by the Russian Foundation for Basic Research (Project No. 94-03-08653).     

核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

二(三苯基膦)水杨酸铜(Ⅰ)乙醇溶剂配合物的晶体结构

0IntroductionThestudyofcopper?complexesisinvestigatedinmanylaboratories.Amongthereasonsforcarryingouttheinvestigationofsuchspeciesaretheirstructuralfeatures犤1犦,theusefulnessofcopper?compoundsinorganicsyntheses犤2犦andthewell-documentedimpor-tanceofcopper?centersattheactivesitesofanumberofprotein犤3犦.Concerningcopper?carboxy-latesafurtherinterestexists,stemmingfromtheiruseinhomogeheouscatalysedhydrogenation犤4犦.Thecopper?bis(triphenylphosphine)cationisasoft,butflexi-bleacceptorionthatcanacc…     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Influence of hydrogen bonding on the properties of water molecules adsorbed in zeolite frameworks

Three hydrated aluminosilicate frameworks—LiABW, NaNAT, and BaEDI—are partly optimized with the periodic Hartree–Fock CRYSTAL95 code. In particular, we optimized the positions of the adsorbed water molecules including the positions of the framework cations (ABW, NAT) or part of the framework atomic positions (ABW). This allowed us to compare cation–water clusters in the gas and adsorbed states and discuss the influence of hydrogen bonding to the framework oxygen atoms or to the neighbor water molecules on the atomic properties (quadrupole coupling constant, anisotropy of electric field gradient) of the adsorbed water molecules. The LiBIK structure obtained from X‐ray diffraction is also considered to illustrate the hydrogen bonds occurring between adsorbed water molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.