The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

Optically clear simulataneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. II. Kinetic study

Simultaneous interpenetrating polymer networks (SINs) based on diglycidyl ether of bis-phenol A (DGEBA) and poly(ethylene glycol) diacrylate (PEGDA) in weight ratios of 100/0, 50/50, and 0/100 were blended and cured simultaneously by using benzoyl peroxide (BPO) and m-xylenediamine (MXDA) as curing agents. A kinetic study during SIN formation was carried out at 45, 55, 63, and 70°C. Concentration changes for both the epoxide and C?C bond were monitored with FTIR. A rate expression for DGEBA cure kinetics was established with a model reaction of phenyl glycidyl ether (PGE) and benzylamine. Experimental results revealed that lower rate constants and higher activation energy for the SIN were found, compared with those for the constituent DGEBA and PEGDA network formation. A model of network interlock was proposed to account for this phenomenon. During simultaneous cure of DGEBA and PEGDA, the interlock (mutual entanglement) between DGEBA and PEGDA networks provided a sterically hindered environment, which subsequently increased the activation energy and reduced cure rates for both DGEBA and PEGDA. © 1993 John Wiley & Sons, Inc.     

LyP-1 peptide-functionalized gold nanoprisms for SERRS imaging and tumor growth suppressing by PTT induced-hyperthermia

The gold nanoprisms (GNPs) have exhibited special plasmonic properties for biomedical applications because of their unique shapes and dimensions. Based on their optical performance, the NIR dye IR780 not only enabled the GNPs-based nanosystem as SERRS nanoparticles for Raman-encoded molecular imaging, but also enhanced the plasmonic photothermal property by laser irradiation. Meanwhile, the GNPs/IR780-Lyp-1 by introduction of tumor-homing peptide segment LyP-1, which presents high affinity to p32 protein, demonstrated the increased enrichment in tumor region and enhanced photothermal therapy efficacy.     

Process improvement in acetone-butanol production from hardwood by simultaneous saccharification and extractive fermentation

The acetone-butanol production by simultaneous saccharification and extractive fermentation (SSEF) was investigated. In the SSEF employing cellulase enzymes andClostridium acetobutylicum, both glucan and xylan fractions of pretreated aspen are concurrently converted into acetone and butanol. Continuous removal of the fermentation products from the bioreactor by extraction was an important factor that allowed long-term fed-batch operation. The use of membrane extraction prevented the problems of phase separation and extractant loss. Increase in substrate feeding as well as reduction of nutrient supply was found to be beneficial in suppressing the acid production, thereby improving the solvent yield. Because of prolonged low growth conditions prevalent in the fed-batch operation, the butanol-to-acetone ratio in the product was significantly higher at 2.6–2.8 compared to the typical value of two.     

胶束介质在动力学分析中的应用

评述了胶束介质在动力学分析测定中的作用和应用状况，讨论了胶束催化的动力学特征，胶束对反应物理化学性质的修饰及其在动力学多组份测定和酶催化动力学分析中的应用。     

Photochemical Ionic-Conductivity Switching Systems of Photochromic Crown Ethers for Information Technology

Design of two types of ion-conducting systems using photochromic crown ethers as the photocontrol agents is described; one type is based on the phase transition of azobenzene derivatives induced by their photoisomerization and the other based on the molecular control of metal ion complexation by crowned spirobenzopyrans. The photoresponsive ion-conducting systems are applicable to electrostatic imaging and photorefractive materials.     

Energy filtered transmission electron microscopy for the physico-chemical characterization of aquatic submicron colloids

A combination of energy filtered transmission electron microscopic (EF-TEM) procedures is proposed for the non-perturbing physico-chemical characterization of submicron mineral and organic colloids in aquatic systems. Synthetic hematite microparticles and xanthan polysaccharides were used as well-characterized model colloids in order to determine the optimum EF-TEM analysis conditions. In this paper, it is demonstrated that (i) our model colloids are morphologically representative of naturally occurring mineral/organic associations, (ii) EF-TEM allows the detection of fine xanthan ultrastructures without artefacts of conventional staining methods and (iii) submicron hematite particles can be specifically visualized and spectrometrically measured by EF-TEM within a hematite/xanthan mixture. This EF-TEM procedure appears to be appropriate for the characterization of real aquatic samples.     

动力学体系中双组份的协同效应研究及其分析应用

用停流ＦＩＡ－分光光度法研究了铬（Ⅵ）－碘化钾动力学反应体系中铁(Ⅱ)和钒(Ⅳ)的协同诱导效应，以协同系数（Ｄ）表示二者相互作用程度的大小，在此基础上提出了一种新的动力学双组份同时测定的方法，本法可扩大前述方法的线性范围，并降低检测限，测定了模拟水样品中铁和钒的含量，结果满意。     

Fluorescence Analysis in Microarray Technology

Fluorescence has been the preferred choice for data quantification in biomedical microarray formats since their earliest days. As much as the formats have grown and evolved over the years, the methods in optical analysis have become ever more sophisticated and complex in order to produce more and better output. This review will provide an insight into the most common methods and the state-of-the-art of all areas in microarray fluorescence analysis. Starting with an overview on microarray formats with a focus on their demands on the readout, the most common and useful organic fluorescent stains are discussed before proceeding on to other approaches; the use of semiconductor nanocrystals (quantum dots), polymer and silica nanoparticles and fluorescent proteins. Ways to enhance the intrinsically low signal on biochips have become increasingly important as they offer a sound approach towards the detection of low concentration sample content. The three main categories are presented: amplification using DNA, enzymes, and dendrimers. As much diversity as on the microarrays themselves can be found at the detection device. Standard optical microarray detectors, and non-standard methods using fluorescence anisotropy, fluorescence lifetime imaging (FLIM) and fluorescence resonance energy transfer (FRET), and their advantages and disadvantages are discussed.     

Self-strengthening and high temperature sintering in binder-free silicon nitride

A thermal strengthening process, which occurs during low-temperature heating of binder-free silicon nitride, has been investigated using simultaneous thermal analysis, dilatometry and FTIR and shown to occur in separate stages over clearly identifiable temperatures. Reactions which give the strengthening are the loss of physically and chemically combined water and the decomposition of ammonium carbonate and various hydrosilicates. Compacts have bend strengths of 8–10 MPa after strengthening at 500°C and 30–34 MPa after strengthening at 900°C. High-temperature dilatometry shows several stages of sintering. The maximum rate occurs at 1800°C with shrinkage commencing at 1450°C. Densities of 98.3% theoretical are obtained on heating to 1900°C.