改善光纤倒像器的对比度传递特性

光纤倒像器是一种特殊类型的光纤板，可将传递图像直接倒转180°并应用于像增强器。由于光纤倒像器的特殊结构，造成光纤随着距扭转轴心的距离增加，数值孔径和光通量逐渐下降。相对于光纤板，光纤倒像器在透过率和对比度传递特性上均有一定程度的下降。通过改进玻璃系统，在一定程度上降低芯皮玻璃间离子扩散和相互渗透的程度，可提高光纤倒像器的实际数值孔径；通过调节EMA吸收量，既能满足像增强器对光纤倒像器荧光屏透过率的要求，又能保证最大程度地吸收光纤中逸出的杂散光，提高对比度。选择合理的芯皮比，不仅可弥补因扭转拉伸造成的皮层厚度减薄，还可进一步增加皮层厚度，抑制光从光纤中逸出。通过以上改进，可改善光纤倒像器的对比度传递特性。     

Ar?NO团簇的同步辐射光电离研究

利用国家同步辐射实验室合肥光源的真空紫外同步辐射，使NO分子和Ar原子混合物的超声分子束发生光电离，测量了Ar，NO和异类团簇Ar·NO的光电离效率谱. 在谱中，在与Ar原子的共振线对应的能量区域(11.5—12.0 eV)观察到一个强的类共振结构. 这个结果表明，在异类团簇Ar·NO的内部，稀有气体Ar原子的激发能转移到与它接触的分子NO上，使分子NO发生电离. 关键词： Ar·NO团簇 同步辐射 光电离 能量转移     

PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

催化剂薄层内甲烷水蒸气重整反应强化管内对流换热的数值模拟

本文以竖直圆管内壁催化剂薄层内发生甲烷水蒸气重整反应强化对流换热作为研究对象,对其进行了数值模拟．结果发现,催化剂薄层内的吸热化学反应可以有效地强化对流换热,降低流体和壁面温度,从而对壁面起到保护作用;极限热流密度的大小与流体的入口温度有关,存在最佳入口温度使极限热流密度最大．     

微光像增强器图像传递信噪比的测试研究

图像传递信噪比是微光像增强器的重要特性参数．能够全面定量地表征像增强器在探测弱辐射图像时的综合性能，对于确定像增强器的图像探测灵敏闽具有重要意义。针对其测试原理．采用高灵敏度低噪声CCD器件作为像管输出图像的探测接收器．并引入数字图像处理技术。利用设计的测试系统实现了典型目标图像传递信噪比的自动测试．多次实验结果表明．陔测试系统具有测试过程自动快速及测试数据准确稳定的优点．相同测试条件下的不确定度优于±3%。     

Optimal Control of Non-well-posed Heat Equations

This work is concerned with Pontryagin＇s maximum principle of optimal control problems governed by some non-well-posed semilinear heat equations. A type of approach to the non-well-posed optimal control problem is given.     

The Heat Equation with Initial Data Corrupted by Measurement Error and Missing Data

In this work the Cauchy problem for the one-dimensional heat equation is considered. In contrast to existing literature it is assumed that the initial state f is unknown and that information regarding f is obtained by some process of measurement. To enhance realism, both measurement errors and missing data are allowed for. Under assumptions on f in the Fourier-domain first an approximation to f is derived from the data by means of a novel uncertainty principle. Then, it is studied how this perturbation in the initial state propagates with time.      

Numerical simulation of thermally and chemically nonequilibrium flows and heat transfer in underexpanded induction plasmatron jets

The results of numerical simulation are presented for thermally and chemically nonequilibrium air plasma flows in a plasmatron discharge channel and underexpanded dissociated and partially ionized air jets flowing past a cylindrical model with a blunt leading edge and cooled copper surface under the experimental conditions realized in a VGU-4 100 kW induction plasmatron (Institute for Problems in Mechanics of the Russian Academy of Sciences) (see, for example, [1, 2]). The nonequilibrium excitation of the vibrational degrees of freedom of the molecules in the modal approximation and the difference between the electron and translational heavy-particle temperatures are taken into account in the calculations. The calculated data on the heat transfer and pressure at the stagnation point are compared with the results obtained within the framework of the thermally equilibrium model. Comparison with the experimental data obtained in the Institute for Problem in Mechanics of the Russian Academy of Sciences (Laboratory for interaction between plasma and radiation and materials) and kindly provided for comparison purposes gives satisfactory agreement.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005