Silica-supported Copper（Ⅱ） Catalyzed Coupling of Arylboronic Acids with Imidazoles

Immobilized copper（Ⅱ） in organic-inorganic hybrid materials catalyzed Ar-N coupling of arylboronic acids with imidazoles has been developed. Arylboronic acids reacted with imidazoles smoothly in the presence of a 3-（2-aminoethylamino）propyl functionalized silica gel immobilized copper（Ⅱ） catalyst （10 mol%） in methanol without any additives and bases. The reactions generated the corresponding cross-coupling products in good yields. Furthermore, silica-supported copper can be recovered and recycled by a simple filtration procedure and used for five consecutive trials without decreases in activity.     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.     

盐酸含量对光固化聚氨酯丙烯酸酯/SiO2杂化材料结构和性能的影响

由正硅酸乙酯水解制得的SiO2溶胶，在以γ—甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂的体系中，经溶胶-凝胶法制备了透明的光固化聚氨酯丙烯酸酯杂化材料[(PUA—TMSPM)／SiO2]。研究了盐酸浓度对(PUA-TMSPM)／SiO2结构与性能的影响。结果表明：随着pH值减小，硅溶胶体系和(PUA-TM-SPM)／SiO2杂化体系的热稳定性增大；盐酸摩尔分数XHCl的增加使(PUA-TMSPM)／SiO2光固化膜表面的两相界面结合更紧密，涂层变得更致密，并导致膜的硬度和耐磨性提高。     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

尖晶石LiMn_2O_4的多元掺杂改性研究

采用高温固相法合成了多元复合掺杂改性的尖晶石型锰酸锆正极材料，用X射 线衍射法对材料进行了表征，表明所得材料均呈现良好的尖晶石的结构，通过充放 电测试，发现其中LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)La_(0.01)O_4和 LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)-Zr_(0.01)O_4的循环性能有了很大程 度的改善，循环50次后仍能保持94%和91%的容量。     

基于国际化产科教融合实训平台的教学模式改革与实践

在分析当前省属工科院校教育以能力为导向培养目标完成实施过程中遇到国际化困难问题的基础上，以青岛大学材料学科为例，提出了基于国际化产科教融合实训平台的教学模式改革举措，并经过实践验证证实其切实可行。包括：充分整合校内外材料学科整体资源，建立了国际化的产科教深度融合实训平台，构建了高效的国际化产科教深度融合协同育人实训平台动态管理运行机制；以实训平台为依托实现师资队伍、教学内容、教学模式、科研等全方位的国际化改革；基于国际化产教研融合实训平台的教学模式改革的实践收到显著成效，对全国省属高等院校理工学科专业建设国际化改革的推广有较好的示范作用。     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

无焰燃烧烟密度标准物质的研制

介绍无焰燃烧烟密度标准物质的研制方法。选用合适的α-纤维素作为原材料,经打浆造纸后,作为标准物质候选物,经均匀性检验和稳定性考察合格后,对标准物质进行定值。在无焰燃烧条件下烟密度标准物质的标准值为175,扩展不确定度为8;校正烟密度标准物质的标准值为166,扩展不确定度为8。     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。