Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

A new polar nephelometer for measurement of atmospheric aerosols

The angular dependence of light scattered by aerosol particles in the atmosphere—the aerosol phase function—is one of the key properties of every radiative transfer and climate model. Side-scattering in the atmosphere is currently believed to be underestimated by most of the radiative transfer models in certain cases. The aerosol phase function can be measured with polar nephelometers.An innovative polar nephelometer able to measure the phase function of ambient aerosol directly is presented in this publication. The performance of the device was simulated completely using ray-tracing techniques. The results of these simulations are used to interpret the measurement data precisely. The measurements with the new polar nephelometer are fully automated. The quality of the measurement results was verified using different approaches. The values of the statistical and systematic error in measuring atmospheric aerosol are about 4% each. Scattering angles from 10° to 160° were measured and it is shown that with the same design this range can be extended to 3-177° in steps of 0.16° with an aperture of less than 1.8°.Measurements of the aerosol phase function are presented and compared with data taken with an integrating nephelometer and measurements of the particulate matter concentration. All data correlate very well. The described polar nephelometer can measure the phase function and the scattering coefficient of atmospheric aerosol with high accuracy and can be used for continuous monitoring measurements as well as in field campaigns.     

A hybrid active noise controller for finite ducts

A hybrid active noise controller (ANC) is proposed to solve some existing problems, which are related to the non-minimum phase (NMP) path models between uncollocated sensors and actuators in many ANC systems. For hybrid ANC schemes, the NMP path causes design difficulties to both feedforward and feedback control. These problems can be solved effectively by adding an extra actuator in the ANC system. A new design procedure is presented to take the greatest advantage of the extra actuator. Theoretical analysis and experimental results are presented to show the improved performance of the proposed ANC.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.     

On Covariant Phase Space and the Variational Bicomplex

The notion of a phase space in classical mechanics is well known. The extension of this concept to field theory however, is a challenging endeavor, and over the years numerous proposals for such a generalization have appeared in the literature. In this paper We review a Hamiltonian formulation of Lagrangian field theory based on an extension to infinite dimensions of J.-M. Souriau's symplectic approach to mechanics. Following G. Zuckerman, we state our results in terms of the modern geometric theory of differential equations and the variational bicomplex. As an elementary example, we construct a phase space for the Monge–Ampere equation.     

斐索型光学合成孔径系统近轴成像条件研究

从几何光学理论出发，详细推导了斐索型光学合成孔径成像系统的近轴非相干成像条件，即子望远系统的角放大率等于系统的线性缩放因子。对于焦平面上的像点而言，合成孔径成像系统可等效为一个带有特殊形状孔径光阑的望远系统，这要求该孔径光栏的开口形状和位置分布与合成孔径成像系统各子系统孔径大小和位置分布相一致。我们由此得到了斐索型合成孔径成像系统的主要约束条件。     

高功率固体激光放大系统相位自校正方法研究

就光学元件间低频相位误差叠加提出用相关系数作为叠加相位结果的估计参量，并通过模拟计算和验证实验证明了相关系数能有效地对低频相位叠加结果进行比较估计，在此基础上就高功率固体激光放大系统中放大片的选取和安装提出了自校正方法并实现了自校正过程。     

Magnetic phases in Mn<Subscript>1</Subscript>_<Subscript>x</Subscript>Fe<Subscript>x</Subscript>WO<Subscript>4</Subscript> studied by neutron powder diffraction

The magnetic structures of Mn_1-xFe_xWO₄ with x = 0.0, 0.16, 0.21, 0.225, 0.232, 0.24, 0.27, 0.29, and 1.0 were refined from neutron powder diffraction data. The magnetic phase diagram could be completed in the coexistence range of different magnetic structures up to x = 0.29. For the magnetic state at 1.5 K a commensurate antiferromagnetic structure with a propagation vector = (±1/4, 1/2, 1/2) was found for x ⩽ 0.22 while the magnetic spins order with = (1/2, 0, 0) for x ≥ 0.22. In the latter phase, additionally, weak magnetic reflections indexed to an incommensurate ordering with = (- 0.214, 1/2, 0.457) occur in the diffraction pattern up to x = 0.29 indicating the occurence of a reentrant phase. For 0.12 ⩽ x ⩽ 0.29 the low temperature phases are separated from a magnetic high temperature phase showing only magnetic reflections indexed to a spin arrangement with = (1/2, 0, 0). The magnetic phase diagram is discussed qualitatively considering random superexchange between the statistically distributed Mn²⁺- and Fe²⁺-ions in the coexistence range 0.12 ⩽ x ⩽ 0.29 of different magnetic structures related to those of pure MnWO₄ and FeWO₄. Received 9 October 2002 Published online 14 March 2003     

红外单站被动定位技术速度更新算法研究

针对红外单站被动定位技术中空中机动目标的运动速度不断变化这一实际情况,提出了一种基于红外相机运动特性的对目标的运动速度进行实时更新的校正算法.该算法克服了大多基于匀速直线运动这一空间模型的红外单站被动定位方案目标速度不变的缺点,客观地反映了空中机动目标的实际运动状况,不仅能对目标的运动速度进行实时准确的更新校正,而且可推演出一种新的红外单站被动定位算法,对推动红外单站被动定位技术的工程实用化进程具有重要的意义.     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。