光学薄膜氧气传感器研究进展

光学薄膜氧气传感器具有检测精度高、选择性好、抗干扰能力强等优点,近年来日益得到人们的广泛重视,研究工作也在不断深化和拓展,展现出十分广阔的应用前景。本文按光学薄膜氧气传感器的制备方法分类扼要综述了光学薄膜氧气传感器的研究现状,并展望了其研究前景。     

锰—铈复合氧化物催化剂表面氧的性质

氧化锰催化剂广泛用于一氧化碳常温氧化及汽车尾气的净化等,CeO_2是氧化物催化剂的优良助剂。非贵金属催化剂中添加CeO_2能提高催化剂的氧化活性已有很多报道,但有关Ce对氧化锰结构及表面氧脱附性能影响的研究尚不多见。本文运用XRD、DTA和TPD-MS等手段对共沉淀法制得的Mn-Ce复合氧化物进行了物相结构和脱氧活性研究。     

cotpp-pt/c作直接甲醇燃料电池阴极催化剂

四苯基钴卟啉;pt催化剂;直接甲醇燃料电池;氧还原     

Synthesis and Crystal Structure of a Vanadium(Ⅴ) Complex with 2-Hydroxy-1-naphthaldehyde Isonicotinoyl Hydrazone

The mononuclear vanadium(Ⅴ) complex with 2-hydroxyl-1-naphthaldehyde isoncotinoyl hydrazone was synthesized and characterized by single-crystal X-ray diffraction.The crystal is of monoclinic,space group P2 1/n with a = 10.3153(15),b = 7.4024(11 ),c = 24.413(4) (A),β= 101.911(2)°,V= 1824.0(5) (A)3,Z = 4,Mr = 427.28,Dc = 1.556 g/cm3,F(000) = 880,μ(MoKα) =0.591,the final R = 0.0372 and wR = 0.0926.The vanadium(Ⅴ) atom adopts a distorted square-pyramidal geometry coordinated by the tridentate ligand and two oxygen atoms.The hydrogen bonds and strong π…π stacking interactions link the complex molecules into a 3-D network structure.     

镀液中Ce^3＋离子对锡镀层结构缺陷和可焊性的影响

应用荧光分析法、X光电子能谱法(XPS)及正电子湮没寿命谱法(PALS)等研究了从含硫酸铈添加剂的酸性光亮锡镀液获得的锡镀层结构缺陷与可焊性的关系。结果表明,电镀时Ce与Sn不发生共沉积,Ce~(3+)的主要作用是阻化Sn~(2+)的水解和氧化使镀液稳定,因而使锡镀层纯度提高、结构致密、表层氧含量减少,有利于提高镀层的可焊性。当Ce~(3+)浓度控制在3.5g/L左右时,可使镀层结构缺陷较少,可焊性较佳,说明结构缺陷是影响锡镀层可焊性的直接原因。     

Kinetic studies of CO2dissociation on supported Ni catalysts

Summary In order to investigate the kinetics of CO₂dissociation on supported nickel catalysts, a novel technique, which can give the surface reaction rate constants with no information on the number of active sites, was developed. It was revealed that CO₂dissociation was more enhanced on TiO₂support than on other metal oxide ones. The activity pattern and activation energies were in good agreement with those obtained by a conventional pulse technique using the number of active sites, suggesting the validity of the present technique for investigating the kinetics of the surface reaction.</o:p>     

合成重要中间体1,4位官能化化合物的简便方法

5,6-取代环烯醚2在乙腈的单重态氧反应有效的生成一系列1,4位官能化化合物3。1,4位官能化化合物为合成上重要的中间体。环烯醚2可以通过β-二酰基化合物1和1,3-二溴丙烷在稀碱(碳酸钾/丙酮)条件下缩合生成。     

Characterization of chemiluminescence from singlet oxygen under laminar flow conditions in a micro-channel and its quenching with beverages

Singlet oxygen was generated by reaction of sodium hypochlorite and hydrogen peroxide in a micro-channel. The two reagent solutions were delivered into the micro-channel by a syringe pump, providing a laminar flow liquid-liquid interface. The chemiluminescence from the singlet oxygen was emitted in the collapse of the interface due to molecular diffusion under laminar flow conditions. The chemiluminescence intensity was observed continuously and stably for each combination of reagents fed into the micro-channel; while, in the normal batch-type reactor the chemiluminescence peaks from singlet oxygen were observed within ca. 5 s. The features of the chemiluminescence emitted under laminar flow conditions were examined by changing the concentrations of sodium hypochlorite and hydrogen peroxide; the concentrations of 2.5 mM sodium hypochlorite and 7.5 mM hydrogen peroxide provided highest chemiluminescence intensities without bubble formation. Also, the effects of beverages, such as green tea, coffee, white wine, red wine, and sake (rice wine), on the chemiluminescence intensity as well as the concentrations of sodium hypochlorite and hydrogen peroxide were examined. The chemiluminescence intensities observed with addition of the beverages to the reagents decreased in the following orders; green tea > coffee > red wine > rice wine > white wine (being added to sodium hypochlorite); coffee > white wine > green tea > red wine > rice wine (being added to hydrogen peroxide). It was found that coffee decreased the chemiluminescence intensity (ca. 33% chemiluminescence decrease) without altering the concentrations of sodium hypochlorite or hydrogen peroxide. The cause of the decrease in chemiluminescence with coffee is discussed.     

High-Temperature Proton Conductors Based on Strontium and Barium Cerates: The Interphase Exchange and Diffusion of Oxygen

Kinetic parameters of interphase exchange of oxygen in high-temperature proton conductors BaCe_0.95Nd_0.05O_3- and SrCe_0.95Y_0.05O_3- are determined using an isotope exchange method in the temperature range 630-820°C at oxygen pressures of 2.7-13.3 gPa and diffusion coefficients for oxygen are calculated. Effective energies of activation of oxygen exchange and diffusion coefficients for oxygen are calculated. Dependence of exchange characteristics and the diffusion coefficients on the oxygen pressure in the gas phase is investigated. The oxygen exchange on the surface of studied oxides is shown to proceed only with the participation of oxygen of the oxides, which causes high rates of interphase exchange of oxygen of studied cerates of barium and strontium. It is shown that the obtained data satisfactorily agree with those found in the relevant literature.