聚苯胺导电复合物二次掺杂的基材效应

对十二烷基苯磺酸掺杂的聚苯胺与氯磺化聚乙烯或苯乙烯－丁二烯－苯乙烯三嵌段共聚物形成的复合物的二次掺杂进行了研究。二次掺杂的复合膜经反掺杂后的ＵＶ－Ｖｉｓ吸收光谱在５８０￣８００ｎｍ处呈现宽的吸收，证实了二次掺杂后ＰＡｎ主链的展开，同时表明ＰＡｎ在ＣＳＰＥ中的展开较在ＳＢＳ中更充分，ＥＳＲ动态测试表明二次掺杂诱导主链的载流子间相互作用有２种方式；ＰＡｎ／ＣＳＰＥ中的单极化子转变为双极化子；ＰＡｎ／Ｓ     

Silicate Xerogels with Dopant-Induced Chirality

A series of silicate xerogels with entrapped chiral amino acids have been obtained via sol-gel technology. The transparent, glassy samples obtained exhibit chirality in the bulk due to the presence of the entrapped asymmetric molecules. Measurements of the optical activity of the doped xerogel samples revealed that the entrapment did not significantly influence the optical activity observed for liquid solutions of the amino acids. Thus, the sol-gel method enables the preparation of amorphous optical materials exhibiting properties of strictly spatially defined molecular systems. Apart from the obvious optical applications, such porous materials with asymmetric centers might find interesting applications in chiral chemical syntheses and separations.     

Si-tolerance of iron doped Pt/alumina catalyst in the total oxidation of VOC

Summary In the present study the effects of addition of iron on the catalytic activity and Si tolerability of Pt/g-Al₂O₃in the total oxidation of volatile organic compounds were investigated. Preliminary results showed that there is a noticeable improvement effect on Si-tolerance of catalyst, particularly for short term poison exposure. Bulk analysis of deposited silicon on the catalyst surface indicated that both Pt/g-Al₂O₃and iron-doped pellets had roughly the same silicone uptakes. Deactivation of catalyst was reversible and much faster for iron doped sample. The promoting effects of iron were related to its electronegativity and, to blocking of fewer Pt sites when iron is present at the surface of the catalyst.     

Potential response in the uncatalyzed bromate oscillatory system

The potential response of the platinum indicator electrode in the uncatalyzed bromate oscillator (UBO) with three different substrates, namely gallic acid (GA), pyrogallol (PG) and veratraldehyde (VA) has been analyzed. The large amplitude oscillations obtained with a Pt electrode are due to the sequential response of the indicator electrode to the varying concentration ratios of the redox couples present in the reaction mixture.     

Synthesis and Characterization of Poly-Ortho-Methylaniline With Different Degrees of Oxidation

Poly-ortho-methylanilines (POT) in three states fully oxidized, fully reduced and oxidized in varying degrees were synthesized by the reaction of common POT (C-POT) having nearly equal amounts of benzenediamine and quinonediimine units with iodine or phenylhydrazine, and the resulting polymers were characterized by IR,~(13)C-NMR, SEM and elemental analysis. The results showed that the quinonediimine unit in C-POT could be reduced by phenylhydrazine to the benzenediamine unit,forming the polymer with low OD (oxidation degree) or in a fully reduced state and that iodine-oxidation resulted in the increase of quinonediimine unit and decrease of benzenediamine unit. The solubility and flexibility of the formed polymers depend strongly on the amount of quinonediimine unit in it. It is necessary to reduce the content of quinonediimine structure unit in order to improve the solubility of aniline-class polymers.     

Photolithographic Patterning and Doping of Silica Xerogel Films

This study shows that conventional photolithography can be applied for patterning native or organic dye-doped silica films (0.5 m thick) obtained via a base-catalyzed sol-gel process. Photoresist was spin-coated onto high optical quality xerogel films, soft-baked, exposed to UV irradiation through a photomask, and developed with a commercial photoresist developing solution. Etching away of the photoresist-unprotected areas of the silica films was carried out with a dilute HF solution, while the remaining unexposed photoresist was removed with acetone. Interdigitated array patterns with features as small as 0.5 mm show a smooth surface and extremely sharp interfaces. Densification of the films at 550°C for 2 h decreases the film thickness by 11%, increases the refractive index from 1.420 to 1.456, and allows for well-defined patterning down to length scales of 10 m. Since the densification conditions are incompatible with organic dopants, it is demonstrated that sol-gel films can be doped after pattering (post-doping) by adsorption of cationic dyes from solution. Scanning electron microscopy reveals that the microstructure of patterned sol-gel films is similar to that of bulk monoliths, indicating that the photolithographic procedure is not harmful to the film quality. All patterned films demonstrate highly regular light diffraction patterns.     

Use of solid electrolyte GeSe-GeI<Subscript>2</Subscript> for electrochemical doping with germanium

Lead tellurite is study to show that solid electrolyte GeSe-GeI₂, which has the optimum composition and contains 5 mol % of GeI₂, can in principle be used for electrochemical doping of semiconducting materials with germanium by the coulometric titration method. Some parameters of the coulometric titration are considered. The doping efficiency is monitored by determining variations in the concentration of charge carriers using the Hall method and by measuring the EMF of corresponding galvanic cells.     

Effects of Poly(ethylene glycol) Doping on the Behavior of Pyrene, Rhodamine 6G, and Acrylodan-Labeled Bovine Serum Albumin Sequestered within Tetramethylorthosilane-Derived Sol-Gel-Processed Composites

We investigate the effects of controlled poly(ethylene glycol) (PEG) doping on the behavior of pyrene, rhodamine 6G (R6G), and acrylodan-labeled bovine serum albumin (BSA-Ac) sequestered within tetramethylorthosilicate (TMOS)-derived sol-gel-processed materials. To probe the dipolarity of the local environment within the composite we performed static fluorescence measurements on pyrene as the composites aged. We found that small levels of PEG loading effected significant enhancements in the local dipolarity surrounding the average pyrene molecule. Time-resolved fluorescence anisotropy measurements were used to follow the rotational reorientation dynamics of R6G as the composites aged. As the PEG loading increased, the R6G reorientational mobility increased. Nitrogen adsorption techniques were used to quantify the effects of PEG doping level on the surface area and final xerogel pore features. A large reduction in surface area was observed with PEG doping, but no detectable change in pore size was noted. The effects of PEG doping on a biomolecule were probed by following the time-resolved fluorescence anisotropy decay of BSA-Ac. These results showed that PEG doping resulted in increased biomolecule dynamics relative to that found for a neat, undoped TMOS-derived composites. Together these results show that PEG doping can be used to tune the sol-gel-processed composite dipolarity, alter the mobility of dopants sequestered within the composite, control analyte acessibility to the sensing chemistry, and modulate the internal dynamics within a biodopant.     

纳米Ce1-xCoxO2-δ固溶体的水热合成及表征

采用水热方法, 在络合剂及氧化剂的辅助下合成出传统方法难以合成的Ce1-xCoxO2-δ固溶体. XRD结果表明, Ce1-xCoxO2-δ固溶体具有立方萤石结构; 产物的平均粒度约为4 nm. 小半径、低价态Co离子的掺杂导致晶格收缩. 结合XRD和Raman表征结果确定固溶体的固溶限约为x=0.06. 紫外光谱分析结果表明, Co离子以混合价态(+2, +3)存在于CeO2晶格中, 随着钴掺杂量的增大, 带隙逐渐蓝移. 低于固溶限样品的室温体相电导率随着钴含量增大而提高.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.