薄原子蒸汽膜的双光子光谱及Dicke窄化

薄原子蒸汽膜的单光子Dcike窄化吸收光谱可以拓展到双光子情形，以级联三能级系统为例,从理论上得到了亚多普勒结构的双光子吸收光谱，其线型表现出和单光子过程相似的与膜厚和探测光波长的比值(L/λ)相关的周期性.当L/λ=(2n+1)/2(膜厚为半波长的奇数倍)时，吸收谱线窄化现象明显.当L/λ=2n/2(膜厚为半波长的偶数倍)时，单光子情形的谱线窄化现象消失，而双光子情形的谱线仍表现为亚多普勒结构，尤其在异侧入射的情形下，可以获得极窄的双光子谱线结构. 这种结构来自原子与腔壁碰撞的消激发效应和双光子过程的抽运-探测机制的贡献. 关键词： 薄原子蒸汽膜 双光子光谱 Dicke窄化     

Pt(110)表面自吸附原子能量和力的改进分析型嵌入原子法分析

采用改进分析型嵌入原子法计算了Pt(110)表面自吸附原子的能量和法向力.当Pt吸附原子位于Pt(110)表面第一层原子的二重对称洞位上0.11nm时最稳定.Pt吸附原子的最佳迁移路径是由一个二重对称洞位沿密排方向迁移到最近邻的另一个二重对称洞位.在吸附原子远离表面的过程中，将依次经过排斥、过渡和吸引等三个区域.在排斥区和过渡区，由于吸附原子与表面原子间强的相互作用势，吸附原子的能量和法向力的形貌图均为(110)面原子排列的复形，与对势理论和嵌入原子法得到的结果一致.在吸引区，由于多体相互作用及晶体中原子 关键词： 金属表面 自吸附 能量 力     

离子辐照引起的金属／绝缘体界面混合与相变研究

载能离子穿过固体界面引起界面原子迁移使界面原子混合和物质成分变化，从而导致界面发生材料相变。简要介绍了载能离子辐照引起金属／绝缘体界面混合效应及相变现象的主要实验研究进展、低能离子和高能离子辐照引起金属／绝缘体界面现象差异，并对离子辐照引起界面混合及相变的机制进行了初步探讨。When penetrating an interface between two kind of solids, energetic ions can induce atomic diffusion at both sides of the interface and then result in intermixing, atom re-distribution or composition change, as well as phase transformation. Main progress on the study of intermixing and phase change at metal/insulator interface induced by energetic ion irradiations, the difference of phenomena occurred at metal/insulator interfaces induced by high-and low-energy ions were briefly reviewed. Furthermore, the possible mechanisms related to intermixing and phase change at metal/insulator interface produced by energetic ion irradiations were also discussed in short words.     

Active Q-switching of the Alexandrite laser

An alexandrite-laser rod was actively Q-switched in the transversal fundamental mode at λ = 758 nm with an double crystal KD^*P Pockels cell. Pulse width, pulse energy and optical pulse delay (the build-up time of the photon field in the resonator) were measured as functions of pumping energy, rod temperature and reflectivity of the output coupling mirror. As the laser gain of alexandrite strongly depends on temperature, the pulse width and pulse energy were also investigated as functions of the temperature of the active material. A comparison of experimental data with theory was made.     

An existence result for a two‐phase Stefan problem arising in metal casting

We present a model arising from the thermal modelling of two metal casting processes. We consider an enthalpy formulation for this two‐phase Stefan problem in a time varying three‐dimensional domain and consider convective heat transfer in the liquid phase. Then, we introduce a weak formulation in a fixed domain, by means of a suitable transformation. Existence of solution is obtained by applying an abstract theorem. The proof of this theorem is done by taking an implicit discretization in time together with a regularization. By passing to the limit in the regularization parameter and in the time step, we obtain the existence of solution of the continuous problem. Copyright © 2005 John Wiley & Sons, Ltd.     

双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

Laser vaporization: A versatile method for studying metal clusters

Vaporizing solid samples of metals and semiconductors with a YAG Laser is a method well suited for producing molecules and clusters of those materials. The clusters are examined by either laser-induced fluorescence (LIF) or mass spectroscopic methods. The technique is valuable for both gas phase and matrix studies. The method is described and some applications, studying either the structure of small metal molecules or their reactions, are reviewed, with emphasis on our recent results from the LIF studies of LiBe, Al₂ and the reaction of Al with oxygen, yielding A1₂O. For larger clusters, Ion Cyclotron Resonance is an extremely valuable method, as we demonstrate by its application to the reactions of small charged silicon clusters with strong oxidising agents.     

Photo-Absorption and photochemical decomposition of copper and alkaline-earth ß-diketonates as source gases of high-Tc superconducting films

For low-temperature deposition of oxide films relating to Bi-Sr-Ca-Cu-O superconductors, photo-absorption and -decomposition properties were examined with respect to copper and alkaline-earth ß-diketonates. It was confirmed that all ß-diketonates examined were promising as source materials for photochemical vapour deposition (photo-CVD) using a low-pressure mercury lamp, in view of their large light absorption coefficients at wavelength 254 nm. The light irradiation was effective for the formation of highly crystalline oxide films at temperatures below 600 °C. By combining two sources, Ca₂CuO₃ and SrCuO₂ films were prepared. Photo-CVD of c-axis oriented Bi₂Sr₂CuO_x film was achieved by the irradiation of ternary sources of Bi(C₆H₅)₃ and strontium and copper ß-diketonates at 500 °C.     

The transition of spontaneous polymerization of acrylamide to “explosive” regime

Experimental results related to the transition of spontaneous polymerization of acrylamide complexes with metal nitrates to the “explosive” regime at room temperature are presented. It is suggested that the “explosion” has a thermal nature. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 859–861, April, 1997.     

Physical Analysis of a Possibility to Reach the 1.30-μm Emission from the GaAs-Based VCSELs with the InGaAs/GaAs Quantum-Well Active Regions and the Intentionally Detuned Optical Cavities

Physical aspects of an operation of the GaAs-based InGaAs/GaAs quantum-well (QW) VCSELs with the intentionally detuned optical cavities have been considered in the present paper using the comprehensive three-dimensional self-consistent optical–electrical–thermal-gain simulation. In GaAs-based structures, very good DBR resonator mirrors and a very efficient methods to confine radially both the current spreading and the electromagnetic field with the aid of oxide apertures may be applied. It has been found using the above simulation that even currently available immature technology enables manufacturing the above devices emitting radiation of wavelengths over 1.20 μm. In particular, while the room-temperature 1.30-μm lasing emission is still beyond possibilities of the InGaAs/GaAs QW VCSELs, these structures may offer analogous 1.25-μm emission, especially for the high-power and/or high-temperature operation.