Recurrence propagation equation of Hermite-Gaussian beams through a paraxial optical ABCD system with hard-edge aperture

Based on the generalized Huygens-Fresnel diffraction integral, a recurrence propagation equation of Hermite-Gaussian (H-G) beams through a paraxial optical ABCD system with hard-edge aperture is derived, which permits us to obtain the analytical propagation expression for H-G beams of any order. The advantages of our analytical results are analyzed, and the application is illustrated with numerical examples.     

低阻抗二极管产生的强流电子束能谱分布的数值模拟

 给出了低阻抗二极管产生的电子束能谱分布及外加磁场对二极管阻抗影响的数值模拟研究结果。结果表明，即使在外加电压恒定的条件下，二极管产生的电子束也具有一定的能谱分布，这说明用二极管电压、电流波形计算脉冲电子束能谱分布是不正确的。另外,外加磁场对低阻抗二极管的阻抗特性具有较大影响，其阻抗随外加磁场的增大而减小。分析认为这是由于外加磁场强度的变化改变了二极管中束电子的运动轨迹。当没有外加磁场或外加磁场较小时，低阻抗二极管产生的电子束发生自箍缩，此时二极管电流是自箍缩饱和顺位流；当外加磁场足够强时，电子束的自箍缩被抑制，二极管电流是没有箍缩时的空间电荷限制电流。束电流小于自箍缩临界电流的二极管其阻抗将不随外加磁场的变化而变化。     

2MeV注入器脉冲电子束时间分辨能谱诊断研究

 介绍了利用磁分析器和电子束产生的契伦科夫辐射光诊断直线感应加速器脉冲电子束时间分辨能谱的原理、方法及诊断系统，对中物院2MeV感应叠加型注入器的2kA强流脉冲电子束时间分辨能谱进行实验诊断，并与二极管电压进行对比分析。测得能量约2.2MeV，60ns内最大能量变化为4%。     

离子束合成钇硅化物的结构及红外谱特征

将稀土金属钇离子注入到n型单晶Si(111)中制备出钇硅化物埋层.利用x射线衍射、卢瑟福背散射和傅里叶红外吸收谱测量分析了样品的结构、原子的埋层分布和振动模式.结果表明，Y离子在注入过程中已与基底中的Si原子形成了YSi2结构相.真空下的红外光辐照处理促使YSi2择优取向生长，埋层中Si与Y的平均原子浓度比由24下降为20，与六方YSi2的化学计量比一致.还给出了钇硅化物的特征红外吸收谱.     

多束速调管的增益带宽

 研究了M个束、N个共振腔的多束速调管(MBK)的增益和带宽，得到了描述小信号增益和带宽与器件结构参数和电子束参数关系的公式，给出了在不同参数下增益随频率的变化曲线。分析了多腔对增益，多束对带宽的影响。计算结果表明：多腔可以提高增益；多束可以降低Q值，从而可以增中带宽，带宽增加工了3.6%，还可以提高增益；对于MBK，频率交叉调谐对增加带宽不如频率调谐好；空间电荷波只对增益有影响，对带宽没有影响。最后，预估一种L带多束速调管的增益带宽为8.1%。     

高斯光束计算平板波导自由传输区远场分布及其修正

对近轴近似条件下求解亥姆霍兹方程得到的高斯光束显式传播公式做了分析，同时，基于基尔霍夫衍射理论，在菲涅耳近似的条件下给出了相应的高斯光束在远场的传播公式，在此基础上，对近轴近似条件做出了定量分析，给出了这个近似条件引入的误差，提出了一种计算高斯光束远场分布的修正方法，并采用有限差分-光束传播方法(FD-BPM)来检验各种方法的准确性。把这种修正方法应用到平面光集成波导器件，如阵列波导光栅(AWG)、蚀刻衍射光栅(EDG)等器件的设计和模拟中，可以大大降低工作的复杂性，同时可以得到精确的结果。     

Analytical study of a flattened Gaussian beam through multi-apertured optical imaging systems of B = 0

By using the methods of the matrix decomposition and expansion of the hard-edged aperture function into a finite sum of complex Gaussian functions, the recurrence propagation expressions for a flattened Gaussian beam (FGB) through multi-apertured optical imaging systems of B = 0 are derived and illustrated with numerical examples. Comparisons with the straightforward numerical integration of the Collins formula and with the previous work are made. It is shown that the main advantages of our methods and results are the more accuracy and great reduction of computer time.     

Effect of secondary electrons from latent tracks created in YBCO by swift heavy ion irradiation

Swift heavy ions (SHI) with electronic energy loss exceeding a value of 14.4 keVnm⁻¹ create amorphized latent tracks in YBCO type superconductors. In the low fluence regime of an ion beam where tracks do not overlap, a decrease of the superconducting transition temperature as probed through resistivity studies, is not expected due to availability of percolating current paths. The present study however shows T_c decrease by about 1–3 K in thin films of YBCO when irradiated by 250 MeVAg ions at 79 K at a fluence of 5×10¹⁰–1×10¹² ionscm⁻². The highest fluence used in the present study is three times less than the fluence where track overlapping becomes significant. The T_c tends to increase towards the preirradiation value on annealing the films at room temperature. To explain this unusual result, we consider the effect of ion irradiation in inducing materials modification not only through creation of amorphized latent tracks along the ion path, but also through creation of atomic disorder in the oxygen sublattice in the Cu–O chains of YBCO by the secondary electrons. These electrons are emitted radially from the tracks during the passage of the SHI. Considering the correlation between the charge state of copper and its oxygen coordination, we show in particular that the latter process is a consequence of the inelastic interaction of the SHI induced low-energy secondary electrons with the YBCO lattice, which result in chain oxygen disorder and T_c decrease.     

射束有效宽度与成像系统MTF关系的研究

射线成像系统的射线有效宽度是评定系统成像分辨率的重要成像指标。以试验的方法,通过测试系统成像的MTF,通过对成像分辨率与射线有效宽度的关系进行研究,为射线数字成像(DR)及工业CT系统设计提供了参考。     

Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导