稀土在低硫铌钛钢中的作用

在实验条件下采用50kg真空感应炉炼和两段控制轧制工艺，并采用WE－60型万能拉伸试验机，JB－30B型冲击试验机，MM6型及OLYMPUS－PME3型光学金相显微镜，IBAS－2000图相分析等手段研究了稀土对低硫铌钛钢性能，组织及夹杂物的影响。在低硫铌钛钢中的试验结果表明，稀土元素的加入使力学性能变化各异，它使钢的横向屈服点和抗拉强度先下降而后上升；延伸率则无下降而后上升；稀土对钢的横向冲击功则表现为先上升而后下降，并且在－20℃以上，适量的稀土加入可以明显改善其冲击功的各向异性；稀土的加入并不能改变钢的显微组织类型，钢的组织为铁素体＋珠光体，但稀土会使钢中珠光体数量增加，铁素体数量减少，在钢中夹杂物方面，稀土加入则表现为它一方面 化钢液，使钢中夹杂物数量减少，另一方面是使钢中夹杂物的颗粒球化，细化和弥散化，从而改善夹杂物的分布。     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.     

Zs－93硒剂对移植性小鼠S＿（180）肉瘤的抑制作用及其免疫活性

用硒与尿素化合，新生的由杂环有机硒所组成的Ｚｓ－９３硒剂治疗移植性Ｓ１８０肉瘤，有显著的抑瘤作用（Ｐ＜０．０１），其作用表现出一定的剂量效应，以５μｇ／只小鼠为最适，抑瘤率达６０．７６％，治疗组小鼠的Ｔ细胞、ＳＯＤ活性均有增强。     

Determination of 8[(3S)-3-amino-1-pyrrolidinyl]-1-cyclopropyl-7-fluoro-9-methyl-4-oxo-4H-quinolizine-3-carboxylic acid hydrochloride and related substances by high performance liquid chromatography

Summary The purity of the investigational antibacterial Abbott-086719.1 (I) which is 8[(3S)-3-amino-1-pyrrolidinyl]-1-cyclopropyl-7-fluoro-9-methyl-4-oxo-4H-quinolizine-3-carboxylic acid hydrochloride is determined using gradient elution HPLC. The chromatographic separation was optimized and the chromatographic parameters critical to separation are discussed in detail. Most acceptable separations were achieved using an Alltima C18 column (5 m) measuring 4.6 mm I.D.×15 cm with 0.01M–0.03M citrate eluents which were modified with acetonitrile or with mixtures of acetonitrile and methanol. Related substances in I were determinable to 0.05%. Repeatability (RSD values) for determining related substances at levels of 0.50 to 0.06% ranged from ±1.9 to ±10%. Determinations of I in 5% dextrose in water and in hydroxypropyl methylcellulose were made using the same column and a simple isocratic system. The determination of I was stability indicating with precision (RSD values) of ±0.5% to ±2.0% and good agreement with theory for formulations containing I at 1.0 to 95 mg/mL concentrations. Recoveries of I from the vehicles were quantitative and linearity of the detector response of I was demonstrated to at least 0.10 mg/mL.     

Dansyl-Modified γ-Cyclodextrin as a fluorescent sensor for molecular recognition

The crystal structure of thiamine iodide sesquihydrate has been determined by X-ray diffraction methods as a host-guest model for coenzyme-substrate interactions. The asymmetric unit contains two chemical units. Both the thiamine molecules A and B, which are crystallographically independent, assume the usualF conformation and have a disordered hydroxyethyl side chain. An iodide anion (or a water molecule) bridges the pyrimidine and thiazolium rings of molecule A (or B) by forming a hydrogen bond with the amino group and an electrostatic contact with the thiazolium ring to stabilize the molecular conformation. In the crystal the thiamine molecules self-associate to form a pipe-like polymeric structure, in which four thiamine hosts surround an iodide guest and hold it through C(2)-H...I hydrogen bonds and thiazolium...I electrostatic interactions. Crystal data: C₁₂H₁₇N₄OS⁺·I^– · 1.5 H₂O, monoclinic,P2₁/c, a=12.585(2), b=25.303(5), c=12.030(2) Å, =115.15(1)°,V=3468(1) ų,Z=8,D _c=1.606 g cm^–3,R=0.045 for 3328 observed reflections. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP. 82156 (13 pages).     

Preparation of cellulose and cellulose derivative azo compounds

Wood pulp and cotton linter are the most common sources of cellulose forindustrial use. Methyl cellulose (MC) and cellulose sulfate (CS) were preparedusing bleached wood pulp and cotton linter. Coloured azo compounds were alsoprepared from coupling cellulose, wood pulp, MC and CS with aromatic diazoniumsalt. The presence of electron-releasing or withdrawing substituents affectedthe electrophilic substitution reaction. The produced azo compounds werecharacterized by FT-IR methodology, as well as mass spectrometry, in which thefunctional groups and the ion fragments of the products were analyzed.     

环糊精及其包结物的电化学研究及应用

本文概述了近年来环糊精及其包结物的电化学研究及应用，同时介绍了我们实验室开展的关于环糊精电化学研究的一些工作。     

Deuterium relaxation time ofα-d-tryptophan included in cyclodextrin host molecules

Deuterium relaxation times ofd- andl--d-tryptophan included in -cyclodextrin derivatives were directly measured by deuterium NMR spectroscopy. The results showed that the molecular motion of the tryptophan molecule was strongly restricted even in the cavity of unmodified -cyclodextrin and the additional recognition groupings — ammonium and carboxylate — on -cyclodextrin did not affect the molecular motion of tryptophan, though the association constants were significantly enhanced.Deceased on March 22, 1987.     

Synthesis and Crystal Structure of 4,4＂-Diamino-N,N＇-diethyl Bisbenzenesulfamide

A new compound of 4,4'-diamino-N,N'-diethyl bisbenzenesulfamide (C18H26N4O4S2,Fw = 426.55) has been synthesized and its structure was determined by X-ray crystallography method. The crystal belongs to the monoclinic system, space group P21/c with a = 10.0623(9), b =13.6759(13), c =15.5309(14) (A),β = 100.482(2)°, V= 2101.6(3)(A)3, Dc = 1.348 g/cm3, F(000) = 904,μ = 0.285 mm-1, Z = 4, the final R = 0.0512 and wR = 0.1363 for 3485 observed reflections with I ＞2σ(Ⅰ). The structure of the title compound is pseudo secondary axisymmetric, and the two sulfamide-groups show distorted tetrahedral configurations.     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．