Study of degradation behavior of besifloxacin,characterization of its degradation products by LC–ESI–QTOF–MS and their in silico toxicity prediction

Knowledge and understanding of the stability profile of a drug is important as it affects its safety and efficacy. In the present work, besifloxacin, a new, fourth‐generation fluoroquinolone antibiotic, was subjected to different forced‐degradation conditions as per International Conference on Harmonization (ICH) guidelines such as hydrolysis (acid, base and neutral), oxidation, thermal and photolysis. The drug degraded under acidic, basic, oxidative and photolytic conditions while it was found to be stable under dry heat and neutral hydrolytic conditions. In total, five degradation products (DPs) were formed under different conditions—DP1 and DP2 (photolysis), DP3 (oxidation), DP4 (acidic), DP3 and DP5 (basic). The chromatographic separation of besifloxacin and its degradation products was achieved on a Sunfire C₁₈ (250 mm × 4.6 mm, 5 μm) column with 0.1% aqueous formic acid–acetonitrile as a mobile phase. The gradient RP‐HPLC method was developed and validated as per ICH guidelines. The degradation products were characterized with the help of LC–ESI–QTOF mass spectrometric studies and the most likely degradation pathway of the drug was proposed. In silico toxicity assessment of the drug and its degradation products was carried out, which indicated that DP3 and DP4 carry a mutagenicity alert.     

Synthesis of thermally stable aromatic poly(spiroorthocarbonate)s having a Cardo or bent structure

Novel poly(spiroorthocarbonate)s [poly(SOC)]s having a Cardo or bent structure were synthesized by polycondensation of several bis‐catechols having fluorene (BCFL), spirobisindane (BCSPI), or spirobischromane (BCSPC) in the structure with 2,2,6,6‐tetrachlorobenzo[1,2‐d:4,5‐d’]bis[1,3]dioxole (4ClBD). Synthesis of poly(SOC)s was confirmed by NMR and IR spectrometry. The poly(SOC)s obtained from BCFL or BCSPC were soluble in common organic solvents. The glass transition temperature of the poly(SOC)s was not detected by differential scanning calorimetry (DSC) in the range of 50–300 °C. The 10 wt % decomposition temperature of the poly(SOC)s was found to be above 400 °C. These results indicated the high thermal stability of the poly(SOC)s. Soluble poly(SOC)s could be possessed to form a film on a glass plate by the spin coat method. The obtained polymer films were 0.2 μm in thickness with 95% light transmission in the optical wavelength range. These results suggested that the Cardo or bent structure may block the packing of the main‐chain of the structure, which improves the solubility of the polymers, increases transparency, and enhances the thermal stability of SOCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1409‐1416     

人教版高中化学必修教科书的内容呈现方式及特点分析*

高中化学教科书是发展学生化学学科核心素养的重要载体和资源平台。依据《普通高中化学课程标准(2017年版)》编写的人教版普通高中化学必修教科书作为分析文本,着重从栏目系统、图像系统、习题系统角度对其呈现方式进行分析,具体特点表现为:栏目系统强化功能性,图像系统凸显直观性,习题系统体现针对性、情境性、开放性,以期为高中化学教师有效使用教科书、落实化学学科核心素养的培养发挥积极作用。     

Sparse Multicategory Generalized Distance Weighted Discrimination in Ultra-High Dimensions

Distance weighted discrimination (DWD) is an appealing classification method that is capable of overcoming data piling problems in high-dimensional settings. Especially when various sparsity structures are assumed in these settings, variable selection in multicategory classification poses great challenges. In this paper, we propose a multicategory generalized DWD (MgDWD) method that maintains intrinsic variable group structures during selection using a sparse group lasso penalty. Theoretically, we derive minimizer uniqueness for the penalized MgDWD loss function and consistency properties for the proposed classifier. We further develop an efficient algorithm based on the proximal operator to solve the optimization problem. The performance of MgDWD is evaluated using finite sample simulations and miRNA data from an HIV study.     

Roe‐type Riemann solvers for general hyperbolic systems

We present a Roe‐type weak formulation Riemann solver where the average coefficient matrix is computed numerically. The novelty of this approach is that it is general enough that can be applied to any hyperbolic system while retaining the accuracy of the original Roe solver. We show applications to the compressible Euler equations with general equation of state. An alternative version of the method uses directly the eigenvectors in the averaging process, simplifying the algorithm. These new solvers are applied in conservative and path‐conservative schemes with high‐order accuracy and on unstructured meshes. Copyright © 2014 John Wiley & Sons, Ltd.     

Stereoselective analysis of flecainide enantiomers using reversed‐phase liquid chromatography for assessing CYP2D6 activity

Stereoselective analyses of flecainide enantiomers were performed using reversed‐phase high‐performance liquid chromatography (HPLC) equipped with a polysaccharide‐based chiral column (Chiralpak AS‐RH) and fluorescence detector. Excitation and emission wavelengths were set at 300 and 370 nm, respectively. Flecainide enantiomers in serum and urine were extracted using diethyl ether. The mobile phase solution, comprising 0.1 m potassium hexafluorophosphate and acetonitrile (65:35, v/v), was pumped at a flow rate of 0.5 mL/min. The recoveries of flecainide enantiomers were greater than 94%, with the coefficients of variation (CVs) <6%. The calibration curves of flecainide enantiomers in serum and urine were linear in the concentration range 5–500 ng/mL and 0.75–15 µg/mL (r > 0.999), respectively. CVs in intra‐day and inter‐day assays were 1.8–5.8 and 3.4–7.5%, respectively. In a pharmacokinetic study, the ratios of (S)‐ to (R)‐flecainide (S/R ratio) in the area under the curve and the amount of flecainide enantiomers excreted in urine were lower in a subject carrying CYP2D6*10/*10 than in subjects carrying CYP2D6*1/*2. The S/R ratio of trough serum flecainide concentration ranged from 0.79 to 1.16 in patients receiving oral flecainide. The present HPLC method can be used to assess hepatic flecainide metabolism in a pharmacokinetic study and therapeutic drug monitoring. Copyright © 2014 John Wiley & Sons, Ltd.     

Rapid and sensitive ultra‐high‐pressure liquid chromatography method for quantification of antichagasic benznidazole in plasma: application in a preclinical pharmacokinetic study

Benznidazole (BNZ) and nifurtimox are the only drugs available for treating Chagas disease. In this work, we validated a bioanalytical method for the quantification of BNZ in plasma aimed at improving sensitivity and time of analysis compared with the assays already published. Furthermore, we demonstrated the application of the method in a preclinical pharmacokinetic study after administration of a single oral dose of BNZ in Wistar rats. A Waters® Acquity UHPLC system equipped with a UV–vis detector was employed. The method was established using an Acquity® UHPLC HSS SB C₁₈ protected by an Acquity® UHPLC HSS SB C₁₈ VanGuard guard column and detection at 324 nm_. The mobile phase consisted of ultrapure water–acetonitrile (65:35), and elution was isocratic. The mobile phase flow rate was 0.55 mL/min, the volume of injection was 1 μL, and the run time was just 2 min. The samples were kept at 25°C until injection and the column at 45°C for the chromatographic separation. The sample preparation was performed by a rapid protein precipitation with acetonitrile. The linear concentration range was 0.15–20 µg/mL. The pharmacokinetic parameters of BNZ in rats were determined and the method was considered sensitive, fast and suitable for application in pharmacokinetic studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural transformation from shish‐kebab crystals to micro‐fibrils through hot stretching process of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution

Structural evolution of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution via hot stretching process was investigated by in situ small‐angle X‐ray scattering, in situ wide‐angle X‐ray diffraction measurements, scanning electron microscopy, and differential scanning calorimetry. With the increase of stretching strain, the long period continuously increases at relative lower stretching temperature, while it first increases and then decreases rapidly at relative higher stretching temperature. The kebab thickness almost keeps constant during the whole hot‐stretching process and the kebab diameter continually decreases for all stretching temperatures. Moreover, the length of shish decreases slightly and the shish quantity increases although there is almost no change in the diameter of shish crystals during the hot stretching process. The degree of crystal orientation at different temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish‐kebab crystals in ultra‐high molecular weight polyethylene fibers can transform continuously into the micro‐fibril structure composed mostly of shish crystals through the hot stretching process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 225–238     

Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.     

A higher resolution edge‐based finite volume method for the simulation of the oil–water displacement in heterogeneous and anisotropic porous media using a modified IMPES method

In this article, we present a higher‐order finite volume method with a ‘Modified Implicit Pressure Explicit Saturation’ (MIMPES) formulation to model the 2D incompressible and immiscible two‐phase flow of oil and water in heterogeneous and anisotropic porous media. We used a median‐dual vertex‐centered finite volume method with an edge‐based data structure to discretize both, the elliptic pressure and the hyperbolic saturation equations. In the classical IMPES approach, first, the pressure equation is solved implicitly from an initial saturation distribution; then, the velocity field is computed explicitly from the pressure field, and finally, the saturation equation is solved explicitly. This saturation field is then used to re‐compute the pressure field, and the process follows until the end of the simulation is reached. Because of the explicit solution of the saturation equation, severe time restrictions are imposed on the simulation. In order to circumvent this problem, an edge‐based implementation of the MIMPES method of Hurtado and co‐workers was developed. In the MIMPES approach, the pressure equation is solved, and the velocity field is computed less frequently than the saturation field, using the fact that, usually, the velocity field varies slowly throughout the simulation. The solution of the pressure equation is performed using a modification of Crumpton's two‐step approach, which was designed to handle material discontinuity properly. The saturation equation is solved explicitly using an edge‐based implementation of a modified second‐order monotonic upstream scheme for conservation laws type method. Some examples are presented in order to validate the proposed formulation. Our results match quite well with others found in literature. Copyright © 2016 John Wiley & Sons, Ltd.