激光二极管泵浦的高重复频率Nd：YAG激光器

报道两个１．５Ｗ连续激光二极管端面泵浦的声光调ＱＮｄ：ＹＡＧ激光器，输出激光脉冲的最高重复频率为３０ｋＨｚ重复频率１ｋＨｚ时，最窄脉宽为１２ｎｓ，最高峰值功率为１２．１ｋＷ。     

稀土铽配合物的有机发光二极管

有机小分子和有机高分子的发光二极管在可见光区内有非常高的量子效率，因而受到人们的高度重视．采用二胶（TPD），8羟基喹啉铝（Alq3）等有机小分子作为空穴和电子输运层所作的发光二极管[1]的量子效率可达10％，采用聚对苯乙炔（PPV）高分子聚合物作空穴输运层，有机小分子2     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。     

二安替比林（3,4—二甲氧基）苯基甲烷光度法测定茶叶中锰

在碱性介质中，加热时空气氧化Ｍｎ为Ｍｎ，Ｍｎ与二安替比林苯基甲烷反应生成橙色产物，吐温２０和乳酸起到协同增敏作用，λｍａｘ＝４６０ｎｍ，ε＝７．８×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锰量在０－１２μｇ／２５ｍｌ范围内符合比尔定律。     

有机/无机异质结薄膜发光二极管

聚合物发光二极管（LED）自从Burrou吵es等于1990年首次报导PPV的电致发光［‘］以来，由于聚合物半导体具有热和化学性能的稳定，克眼了有机小分子材料容易晶化的优点，在平板显示领域必将占有一席之地，从而吸引了许多科学家投身到这一领域来．众所周知，要想实现LED的实用化     

血红蛋白过氧化物模拟酶胶束催化显色体系

在胶束Tween80介质中，研究了以血红蛋白（hemoglobin,Hb)作为过氧化物模拟酶、隐性亮绿（recessive brilliant green,RGB)为氢供体底物、溶解氧为受氢体的酶催化反应特性。在pH5.64(NH4)2HPO4-KH2PO4缓冲溶液中，利用模拟酶对溶解氧作为受氢体催化RBG氧化生成亮绿（brilliant green,BG)而拟定了测定Hb含量的新方法。讨论了胶束介质对酶体系催化反应的影响及酶催化反应的可能机理。     

稀土发光材料在固体白光LED照明中的应用

固体白光发光二极管将成为21世纪新一代的节能光源. 要实现白光发射的重要途径之一是利用稀土发光材料的荧光转换技术, 把InGaN半导体管芯发射的460 nm蓝光或400 nm近紫外光转换成白光. 分别就这两种管芯报道了我们研制的发射蓝、绿、黄、红等不同颜色的稀土发光材料： YAG：Ce, Ca1-xSrxS：Eu^2＋, Ga2S3：Eu^2＋, MGa2S4：Eu^2＋（M=Ca, Sr, Ba）, SrGa^2＋xS4＋y：Eu^2＋, （Ca1-xSrx）Se：Eu^2＋, SrLaGa3S6O：Eu^2＋, （M1, M2）10（PO4）6X2, （M1=Ca, Sr, Ba; M2=Eu, Mn; X=F, Cl, Br）, NaEu0.92Sm0.08（MoO4）2, 并报道了由它们制成的白光发光二极管的色坐标、相关色温和显色指数等参数.     

Novel fiber-optic biosensor based on immobilized glutathione S-transferase and sol–gel entrapped bromcresol green for the determination of atrazine

The aim of this work was to investigate, for the first time, the potential of the enzyme glutathione S-transferase I (isoenzyme GST-I) for uses in analytical chemistry. A novel fiber-optic biosensor for the detection and determination of the triazine herbicide atrazine was developed based on maize GST-I expressed in E. coli. The sensing bioactive material was a three-layer mini-sandwich. The enzyme was immobilized on the outer layer that consisted of a hydrophilic polyvinylidenefluoride membrane. This membrane was supported on an inner glass disk by means of an intermediate binder sol–gel layer that incorporated bromcresol green (BCG). The biosensor operated in a static mode at 25 °C and the rate of the enzymatic reaction, using atrazine as a substrate, served as an analytical signal. A calibration curve was obtained for atrazine, with analytically useful concentration range 2.52–125 μM. The sensor detection limit was 0.84 μM. The reproducibility of atrazine sensing was in the order of ±3–5%. The method was successfully applied to the determination of this herbicide in real water samples, without sample preparation steps. Atrazine recovery ranged between 85 and 110%. No interference from other pesticides, such as alachlor and carbaryl was observed in the absence of atrazine. The immobilized enzyme retained about 75% of its original activity after 1 month use. Simply unscrewing the terminal holding ring of the probe and placing a new bioactive sandwich could easily replace a deteriorated mini-sandwich.