以PVA为分散介质制备纳米氧化铁颗粒及其ESR特征(英文)

利用金属离子在高分子配合物中独特的离子簇结构以及PVA对所制样品颗粒的良好保护和分散作用,通过配位转换的方法,在PVA介质中制备出超微氧化铁颗粒,并通过高温煅烧高分子金属氧化物复合体获得红褐色纳米氧化铁颗粒.XRD测试表明此氧化物为α Fe2O3和Fe3O4的混合物,粒径为40～65nm;样品的ESR结果表明该法制备的氧化铁颗粒具有较强的磁性.同时,还初步研究了PVA中氧浓度与Fe离子浓度的比及氨水浓度对产物粒径的影响.     

电化学超级电容器电极材料的研究进展

回顾了电化学超级电容器电极材料的研究进展，并对不同电极材料的储能原理和性能特点进行了简要的阐述。参考文献29篇。     

有序介孔材料SBA-15吸附Ru（bpy）3^2＋修饰电极的电化学发光研究

制备了具有高比表面积且二维六方高度有序的介孔分子筛SBA-15,并采用TEM和氮气吸附实验对其结构性质进行了表征.利用静电作用将三联吡啶钌[Ru(bpy)32 ]固定到表面带负电荷的SBA-15上,并将吸附有Ru(bpy)32 的SBA-15修饰到玻碳电极表面,研究了该固定化的Ru(bpy)32 的电化学发光行为.结果表明,随着三丙胺(TPA)的加入,氧化电流增加而还原电流减小,表明TPA对三价吡啶钌有催化作用,同时TPA的加入显著增强了发光强度.随着扫描速率的增加,发光强度逐渐降低.SBA-15较大的孔径和开放交联的孔结构体系促进了电极表面膜内的物质扩散和电子运动扩散.该修饰电极在5.0×10-5~1.0×10-2mol/LTPA浓度范围内,发光强度与浓度具有良好的线性关系,线性方程为y=71.7 41.2x,检出限为9.5×10-6mol/L.该电极在连续扫描下具有较好的稳定性.     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

ADVANCES IN STUDY OF A NEW CLASS OF PILLARED LAYERED MICROPOROUS MATERIALS?¤?¤POLYOXOMETALATE-TYPE HYDROTALCITE-LIKE CATALYSTS

In the present paper, on the basis of our work. advances in study of the catalysts of polyacid-type hydrotalcite-like are reported and reviewed. Using polyoxometalates (POM) as pillaring species and layered double hydroxides (LDH) as host matter, a new class of catalytic materials, LDHPOM, has been synthesized by five different methods. Their acidic and oxidative catalytic properties have been investigated by several research groups. The above mentioned information is given in this review.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

Compositional Profiles in Silica-Based Sol-Gel Films Doped with Erbium and Silver, by RBS and ERDA

Photosensitive organic-titania hybrid materials have been prepared from metal alkoxides and various organic ester compounds with double bonds. The refractive index of the film increases with the decrease of the concentration of the organic ester compound, and the highest refractive index of 1.62 is obtained when 2-hydroxymethyl acrylate (HOA) is used as the organic ester and the molar ratio of HOA to Ti is 0.5. The material with the highest refractive index is exposed to femtosecond pulse using the multi-beam laser interference technique. After laser irradiation, the irradiated parts of the material are photopolymerized and periodic structures can be obtained by development of the unirradiated parts. In the case of laser irradiation of 120 J total energy for 5 min, the periodic structure obtained corresponds to 2D photonic crystal structure which is composed of two parts; the material with the highest refractive index and the air.     

层状LiMnO_2正极材料的研究进展

层状LiMnO2 化合物的研究是目前锂离子电池正极材料锂锰氧化物研究工作的新热点 ,本文综述了近年来国内外LiMnO2 化合物的研究进展 ,主要阐述了具有层状和扭曲层状结构的m LiMnO2和o LiMnO2 的结构、电性能、合成和改性方法等方面的研究状况 ,重点介绍了离子交换法合成层状LiMnO2 的原因和机理。探索新的合成方法和掺杂其它金属离子改性以提高循环性能是今后LiMnO2 的研究趋势。     

Adsorption Isotherm of Water Vapor and Its Large Hysteresis on Highly Ordered Mesoporous Silica

The first and second adsorption–desorption isotherms of water vapor on a new mesoporous material derived from kanemite have been measured. The isotherms show unusual type V isotherms and large hysteresis. The type V isotherms, which have never been observed for the other adsorbates, suggest that the mesoporous material has a hydrophobic surface, although the hydrophobicity decreased after treatment with water vapor because of rehydration of the surface. The significantly large hysteresis could be explained by the difference in contact angle between adsorption and desorption.