单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

Thermoanalytical characterization of carbon/carbon hybrid material, Apple Woodceramics

Woodceramics, a carbon/carbon composite of plant-originated carbon reinforced by glassy carbon from phenolic resin, was prepared from apple pomace at carbonizing temperatures of 1073 K (AWC800) and 1473 K (AWC1200), and characterized by thermoanalytical methods and X-ray diffraction (XRD). Simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) showed complicated overlapping reactions similar to those of coal. The initial temperature of pyrolysis was obtained by fitting logistic functions to observed TG data. The results suggested that AWC1200 contained more volatile matter than AWC800. In an inert atmosphere, complicated devolatilization takes place. In an oxidizing atmosphere, thermal change occurs roughly in four steps: desorption of physically adsorbed matter; pyrolysis into aliphatic and aromatic fragments; ignition; combustion of char. The oxidation resistance of AWC1200 was superior to AWC800.     

Synthesis of Some Allyl-β-Cyclodextrin Derivatives and their Properties as Capillary GC Stationary Phases

Summary Three -Cyclodextrin derivatives (-CDs) were synthesized by substituting the 2,6-OH groups of -CD with allyl groups and the 3-OH groups with three different acyl groups (valeryl, heptanonyl, octanoyl). The chromatographic properties of these -CDs as stationary phases for capillary gas chromatography (CGC) were studied. The test results showed that the three -CDs possessed good coating properties and that the capillary columns coated with them exhibited high column efficiency. These -CDs can separate not only the disubstituted benzene isomers but also some racemic compounds.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

FT–IR microspectroscopy study of blends of ester functionalized ethylene–propylene copolymer with (vinylidene fluoride-hexafluoropropene) elastomer

An ethylene—propylene (EPR) copolymer functionalized with (1,2-dicarboethoxy)ethyl groups has been blended with a vinylidene fluoride—hexafluropropene elastomer (NML). The existence of intermolecular interactions involving mainly the carbonyl groups of the side chains of the functionalized copolymer and the methylene hydrogens of the fluoroelastomer through hydrogen bonding was shown by means of FT—IR spectroscopy. The structure and composition of some microdomains in the mixture was examined by means of FT—IR microspectroscopy.     

The effect of ph and gas composition on the bubble fractionation of proteins

Studies were conducted to establish the effect of the variation of environmental factors on the separation occurring in protein systems, resulting from bubble fractionation in a bioreactor. The measure of separation was selected to be the separation ratio. This is defined to be the ratio of either the top or the middle position concentration in the vessel to the bottom concentration of the vessel. Invertase and α-amylase were the two “model” enzymes considered. It was observed that, under certain conditions, i.e., a combination of the nature of the sparging gas and the medium pH, varying degrees of protein separation were achieved. The pH of the system dramatically influenced the separation. It was found that the best separation occurred at a certain pH, assumed to be at or close to thepI of the protein in question. Furthermore, it was observed that systems sparged with CO₂ exhibited greater separation than systems sparged with air. In fact, in the case of invertase, almost threefold separation was observed at the top port when the solution was sparged with CO₂.     

Chromatographic separation of some metal ions on NTA-impregnated thin-layer plates

Summary NTA (nitrilo triacetic acid) has been used as an impregnating agent for an efficient TLC separation of twelve metal ions, using a mixture of 5% aq ammonia, ethanol acetone and acetic acid as the solvent system and dithizone (0.5% in chloroform) for visualization.     

四种溴代甲苯异构体的质谱区分

本工作用四种较新的质谱技术(碰撞诱导解离(CID),电荷剥离(CS),电荷分离(CSe),电子捕获诱导解离(ECID)谱研究了邻、间、对溴甲苯和溴化苄四种异构体。四种技术在一定程度上都可区分这些异构体。其中比较四种异构体ECID谱中ECID峰的相对强度可得到满意的区分效果。     

聚酰亚胺/SiO2杂化膜的制备、表征和气体渗透性能

采用溶胶凝胶法,在以TiO2为过渡层的硅藻土-莫来石陶瓷膜管基底上,制备了组分不同的聚酰亚胺/SiO2杂化膜。聚酰亚胺是利用4,4′-六氟亚异丙基邻苯二甲酸酐、2,4,6-三甲基-1,3-苯二胺和3,5-二氨基苯甲酸在溶液中进行亚胺化完成的。采用FT-IR、TG/DTA、DSC、SEM、BET和气体渗透测定对膜进行了表征和测试。结果表明,聚酰亚胺通过支链上的羧酸基和SiO2相键连织构成了具有规则孔道的空间网状结构,并且随着SiO2含量的增加孔径逐渐减小;杂化膜具有较高的热稳定性和有机无机兼容性;相对于聚酰亚胺膜,杂化膜对H2、CO2和H2O与N2相比较具有较高的分离性,SiO2含量为25(wt)%的杂化膜对H2/N2、CO2/N2和H2O/N2的分离因子分别达到55.9、31.1和42.8。     

Effect of operating parameters on selective separation of heavy metals from binary mixtures via polymer enhanced ultrafiltration

Performance of continuous polymer enhanced ultrafiltration (PEUF) method was investigated for removal of mercury and cadmium from binary mixtures. This method includes the addition of polyethyleneimine (PEI) as a water soluble polymer to bind the metals, which was followed by ultrafiltration operation performed on both laboratory and pilot scale systems. The influence of various operating parameters such as temperature, metal/polymer ratio, presence of calcium ions and pH on retention of metals and permeate flux was investigated. To investigate the possibility of selective separation of mercury and cadmium, experiments were conducted for binary solutions at different pH and loading ratios. It was seen that the retention of mercury decreased and permeate flux increased when the temperature increased. The increased pH and decreased metal/polymer ratio, loading (L), resulted in higher retention of both metals. Shapes of retention vs. pH or L curves were very similar for both metals. Retentions stay almost constant at a value very close to unity until a critical L or pH value was reached, then, R decreases almost linearly with L or pH. However, retention of cadmium was affected more than that of mercury as the pH decreased and L increased. This leads to the selective separation of mercury and cadmium. At low pH values (about 5) and at high L values (about 0.3), mercury was removed by ultrafiltration operation while almost all cadmium passed through the membrane. At pH 5.5 and cadmium/polymer ratio about 0.35 and mercury/polymer ratio about 0.39, the highest separation factor was obtained as 49.