图K(r,2)的邻强边色数

本文给出了每部有2个点的完全r-部图(r≥2)的邻强边色数.     

On pressure separation algorithms (PSepA) for improving the accuracy of incompressible flow simulations

We investigate a special technique called ‘pressure separation algorithm’ (PSepA) (see Applied Mathematics and Computation 2005; 165 :275–290 for an introduction) that is able to significantly improve the accuracy of incompressible flow simulations for problems with large pressure gradients. In our numerical studies with the computational fluid dynamics package FEATFLOW ( www.featflow.de ), we mainly focus on low‐order Stokes elements with nonconforming finite element approximations for the velocity and piecewise constant pressure functions. However, preliminary numerical tests show that this advantageous behavior can also be obtained for higher‐order discretizations, for instance, with Q₂/P₁ finite elements. We analyze the application of this simple, but very efficient, algorithm to several stationary and nonstationary benchmark configurations in 2D and 3D (driven cavity and flow around obstacles), and we also demonstrate its effect to spurious velocities in multiphase flow simulations (‘static bubble’ configuration) if combined with edge‐oriented, resp., interior penalty finite element method stabilization techniques. Copyright © 2008 John Wiley & Sons, Ltd.     

Porcelain Insulator Crack Location and Surface States Pattern Recognition Based on Hyperspectral Technology

A porcelain insulator is an important part to ensure that the insulation requirements of power equipment can be met. Under the influence of their structure, porcelain insulators are prone to mechanical damage and cracks, which will reduce their insulation performance. After a long-term operation, crack expansion will eventually lead to breakdown and safety hazards. Therefore, it is of great significance to detect insulator cracks to ensure the safe and reliable operation of a power grid. However, most traditional methods of insulator crack detection involve offline detection or contact measurement, which is not conducive to the online monitoring of equipment. Hyperspectral imaging technology is a noncontact detection technology containing three-dimensional (3D) spatial spectral information, whereby the data provide more information and the measuring method has a higher safety than electric detection methods. Therefore, a model of positioning and state classification of porcelain insulators based on hyperspectral technology is proposed. In this model, image data were used to extract edges to locate cracks, and spectral information was used to classify the surface states of porcelain insulators with EfficientNet. Lastly, crack extraction was realized, and the recognition accuracy of cracks and normal states was 96.9%. Through an analysis of the results, it is proven that the crack detection method of a porcelain insulator based on hyperspectral technology is an effective non-contact online monitoring approach, which has broad application prospects in the era of the Internet of Things with the rapid development of electric power.     

Fabrication and characterization of Al–Mn superconducting films for applications in TES bolometers

Superconducting transition edge sensor(TES) bolometers require superconducting films to have controllable transition temperatures T_c in different practical applications.The value of T_c strongly affects thermal conductivity and thermal noise performance of TES detectors.Al films doped with Mn(Al-Mn) of different concentrations can accomplish tunable T_(c.)A magnetron sputtering machine is used to deposit the Al-Mn films in this study.Fabrication parameters including sputtering pressure and annealing process are studied and their influences on T_c and superconducting transition width ΔT_c are optimized.The Al-Mn films with ΔT_c below 1.0 mK for T_c in a range of 520 mK-580 mK are successfully fabricated.     

Floquet bands and photon-induced topological edge states of graphene nanoribbons

Floquet theorem is widely used in the light-driven systems. But many 2 D-materials models under the radiation are investigated with the high-frequency approximation, which may not be suitable for the practical experiment. In this work,we employ the non-perturbative Floquet method to strictly investigate the photo-induced topological phase transitions and edge states properties of graphene nanoribbons under the light irradiation of different frequencies(including both low and high frequencies). By analyzing the Floquet energy bands of ribbon and bulk graphene, we find the cause of the phase transitions and its relation with edge states. Besides, we also find the size effect of the graphene nanoribbon on the band gap and edge states in the presence of the light.     

涡轮叶片前缘阵列冲击冷却流动及传热特性数值研究

本文采用SST湍流模型模拟了类前缘通道内蒸汽射流阵列冲击冷却的流动与传热特性,分析了雷诺数(Re=10000~50000)、孔径比(d/H=0.5~0.9)和孔间距比(S/H=2~6)对流动及传热性能的影响规律,得到了相应的传热和摩擦关联式。结果表明:在不同雷诺数下,d/H从0.5到0.9变化时,通道压力损失系数降低了76%~79%,靶面平均努塞尔数降低了45%~49%;S/H从2增至6时,通道压力损失系数增加了1.64~1.92倍,靶面平均努塞尔数增加了54%~64%;增大d/H、减小S/H可有效提高类前缘通道蒸汽冲击冷却的综合热力系数。本文研究结果可为未来先进燃气轮机高温涡轮叶片蒸汽冷却结构的设计提供参考和借鉴。     

不同管径的Y形微燃烧器内氢气-空气非预混燃烧的火焰传播特性

实验研究了内径分别为1 mm、2 mm和3 mm,水平通道长度为200 mm的Y形微燃烧器内氢气/空气扩散燃烧的火焰传播特性。首先,d=2 mm的燃烧器内的火焰传播模式最为丰富。其次,当燃烧器管径较大时,火焰更容易因扰动而发出噪音。在d=2和3 mm的燃烧器内能观察到两个阶段的噪音,而当d=1 mm时只有一个阶段的噪音。d=2 mm的燃烧器内平均火焰传播速度最小。而且,随着管径的增大,边界火焰更长。值得注意的是,在d=1 mm的燃烧器内,实验观察到了移动的"火焰街"。最后,基于系统的实验观察绘制了八种火焰传播模式的分布图。总之,本文不仅揭示了火焰传播特性与运行参数和尺度效应之间的关系,而且能为Y形微燃烧器的设计和运行提供指导。     

自旋轨道耦合Su-Schrieffer-Heeger原子链系统的电子输运特性

在Su-Schrieffer-Heeger (SSH)原子链中,电子在胞内和胞间的跳跃依赖于其自旋时,即SSH原子链存在自旋轨道耦合作用时,存在不同缠绕数的非平庸拓扑边缘态.如何探测自旋轨道耦合SSH原子链不同缠绕数的边缘态是一个重要问题.本文在紧束缚近似下研究了自旋轨道耦合SSH原子链的非平庸拓扑边缘态性质及其零能附近的电子输运特性.研究发现四重和二重简并边缘态的缠绕数分别为2和1;并且仅当源极入射电子的自旋被极化(铁磁电极)时,自旋轨道耦合SSH原子链在零能附近的电子输运特性才能反映其边缘态的能谱特性.尤其是,随着自旋轨道耦合SSH原子链与左、右导线之间的耦合强度由弱到强改变,对于缠绕数为2的四重简并边缘态,入射电子在零能附近的透射峰数目将从4个变为0;而对于缠绕数为1的二重简并边缘态情形,其透射峰数目将从2个变为0.因此,在源极为铁磁电极的情形下,通过观察自旋轨道耦合SSH原子链在零能附近电子共振透射峰的数目随着其与左、右导线之间耦合强度的变化,来探测其不同缠绕数的边缘态.上述结果为基于电子输运特性探测自旋轨道耦合SSH原子链不同拓扑性质的边缘态提供了一种可选择的理论方案.     

Formation of Stone–Wales edge: Multistep reconstruction and growth mechanisms of zigzag nanographene

Although the existence of Stone–Wales (5‐7) defect at graphene edge has been clarified experimentally, theoretical study on the formation mechanism is still imperfect. In particular, the regioselectivity of multistep reactions at edge (self‐reconstruction and growth with foreign carbon feedstock) is essential to understand the kinetic behavior of reactive boundaries but investigations are still lacking. Herein, by using finite‐sized models, multistep reconstructions and carbon dimer additions of a bared zigzag edge are introduced using density functional theory calculations. The zigzag to 5‐7 transformation is proved as a site‐selective process to generate alternating 5‐7 pairs sequentially and the first step with largest barrier is suggested as the rate‐determining step. Conversely, successive C₂ insertions on the active edge are calculated to elucidate the formation of 5‐7 edge during graphene growth. A metastable intermediate with a triple sequentially fused pentagon fragment is proved as the key structure for 5‐7 edge formation. © 2017 Wiley Periodicals, Inc.