Videometric research on deformation measurement of large-scale wind turbine blades

Utilization of wind energy is a promising way to generate power, and wind turbine blades play a key role in collecting the wind energy effectively. This paper attempts to measure the deformation parameter of wind turbine blades in mechanics experiments using a videometric method. In view that the blades experience small buckling deformation and large integral deformation simultaneously, we proposed a parallel network measurement (PNM) method including the key techniques such as camera network construction, camera calibration, distortion correction, the semi-automatic high-precision extraction of targets, coordinate systems unification, and bundle adjustment, etc. The relatively convenient construction method of the measuring system can provide an abundant measuring content, a wide measuring range and post processing. The experimental results show that the accuracy of the integral deformation measurement is higher than 0.5 mm and that of the buckling deformation measurement higher than 0.1 mm.     

Combustion of ethanol fuel droplet in vertical direct current electric field

Flame is affected by an external electric field because it contains ions and electrons related to chemical reactions. On the other hand, the movement of ions and electrons affects the external electric field due to their charge. This paper reports the combustion experiments of ethanol droplets in vertical electric field with variable distance electrodes apparatus in order to discuss the change of the external electric field due to the existence of flame. From a one-dimensional steady-state analysis, if the electric field is changed spatially, its effect on combustion behavior is aligned with V²/L³ and not V/L, where V is the applied voltage between electrodes, and L is distance between the electrodes. The droplet is burned between the two horizontal parallel electrodes. The flame deformation and the electric current are characterized by various electrode distances, and respectively, applied voltages. The vertical electric field induces a body force downwards on the flame. The flame deforms downward in the electric field because the electric body force counters the natural buoyancy. The relation between the applied voltage and electrode distance is investigated when the flame becomes vertically symmetrical and the results show that the deformation is the function of V/L^1.5. This indicates that the change in the electric field should be considered to discuss the effect of an external electric field on combustion behavior. The experimental results are rearranged using εV²/L³ where ε is electric permittivity of air because its unit is N/m³ and it considered to be the representative electric body force. Although its application is limited, qualitatively it can help to explain the experimental results of a droplet combustion. In addition, the degree of electron attachment to neutral molecules is discussed to interpret our experimental results.     

OFLID: Simple method of overlap factor calculation with laser intensity distribution for biaxial lidar

We proposed a simple overlap factor calculation method based on laser intensity distribution (OFLID), which is simple, practical and can be applied to any specific laser intensity distribution. In order to obtain the laser intensity distribution and parameters of our laser system, we designed a simple experiment to measure them, and then simulated an ideal Gaussian and uniform laser intensity distribution with the measured parameters. The OFLID calculation results indicated that the overlap factor of the measured distribution has approximately half the relative error of that of the ideal Gaussian distribution in the increasing range field for our lidar. Specifically, the laser intensity distribution should be regarded in the overlap correction of the lidar signal. Theoretically, the OFLID method can reduce the error caused by the hypothesis of ideal uniform or Gaussian intensity distributions in the analytical method. In addition, the method is easy to implement for overlap correction, signal simulation and system configuration optimization for biaxial lidar.     

直驱型永磁同步风力发电机组中混沌运动的反步自适应控制

以直驱型永磁同步风力发电机为研究对象, 推导了发电机在参数不确定以及风速扰动情况下的数学模型,验证了系统在某些参数及工作条件下会呈现出混沌属性. 并提出了直驱型永磁同步风力发电机混沌运动下的基于反步自适应控制算法,并对其进行了仿真, 仿真结果表明,所提出的算法对于具有参数不确定以及风速干扰的直驱型风力发电系统具有较好的鲁棒性. 关键词： 风力发电 直驱型永磁同步风力发电机组 混沌控制 反步自适应控制     

瑞利散射多普勒激光雷达风场反演方法

介绍了瑞利散射多普勒激光雷达的风场探测原理和系统结构. 给出了Fabry-Perot(FP)标准具透过率曲线的校准方法. 指出对透过率采用Lorentz或Voigt拟合会产生较大误差,特别是采用Lorentz拟合最大将引起8%的误差. 提出了采用非线性最小二乘法拟合标准具的透过率函数,该方法可以有效消除拟合误差,提高风速测量精度. 考虑到温度不确定度在风场反演过程中的主导影响,提出了同时反演风速和大气温度的非线性迭代算法. 风场反演仿真试验结果表明:在不考虑米散射信号的影响下,该反演算法与传统的反演方法相 关键词： 激光雷达 瑞利散射 多普勒 风     

Fernald前向积分用于机载激光雷达气溶胶后向散射系数反演的理论研究

初步反演结果表明,Fernald前向积分法(FFIM)能够用于机载大气探测激光雷达气溶胶后向散射系数的反演,但相应的理论解释没见国内外相关文献报道.根据合肥地基大气探测激光雷达2008年2月27日的探测数据模拟得到的机载激光雷达数据,对FFIE用于机载大气探测激光雷达气溶胶后向散射系数的反演结果进行了定量分析,分析表明:当反演标定点的高度选在10 km左右时,FFIM能够用于机载大气探测激光雷达气溶胶后向散射系数反演的主要原因有3个:1)Fernald前向积分方程(FFIE)分母中两项的差值一般远大于零, 关键词： 大气光学 Fernald前向积分法 机载大气探测激光雷达 气溶胶后向散射系数     

大型航空声学风洞消声室建设与校测

风洞试验是进行民用飞机机体噪声研究的重要手段。为了满足航空飞行器低噪声设计在大型风洞中进行气动噪声试验的需求,气动院建设了FL-10大型低速风洞全消声室。通过在FL-10风洞试验大厅壁面安装吸声尖劈、对洞体外表面进行声学处理、对支撑系统进行隔声处理、对消声换气窗进行降噪处理等手段,建成了气动噪声风洞试验所需的声学环境。按照国标中给定的方法,利用张线方法实现了校准声源的布置,测量了消声室内沿不同路径、不同频率噪声的衰减规律,表明FL-10风洞消声室自由场特性达到了相应标准的要求,为后续在该风洞中进行大尺寸机体模型噪声试验奠定了基础。     

BOPPPS模型在大学物理课程中的实践探索

本文针对大学物理课程的特点以及传统教学模式中存在的问题,将BOPPPS模型引入到大学物理的课程教学中,并以多普勒效应为例,设计了微课教学.将学生的学习方式由被动接受转变为主动探究,有效地提升了学生兴趣及课堂效率,使学生能够深刻地领会和掌握抽象的物理概念,并能够将相关理论知识应用到工程实践中去,对提高教学质量具有一定的参考价值.     

Design of three-dimensional imaging lidar optical system for large field of view scanning

Three-dimensional (3D) lidar has been widely used in various fields. The MEMS scanning system is one of its most important components, while the limitation of scanning angle is the main obstacle to improve the demerit for its application in various fields. In this paper, a folded large field of view scanning optical system is proposed. The structure and parameters of the system are determined by theoretical derivation of ray tracing. The optical design software Zemax is used to design the system. After optimization, the final structure performs well in collimation and beam expansion. The results show that the scan angle can be expanded from ±5° to ±26.5°, and finally the parallel light scanning is realized. The spot diagram at a distance of 100 mm from the exit surface shows that the maximum radius of the spot is 0.506 mm with a uniformly distributed spot. The maximum radius of the spot at 100 m is 19 cm, and the diffusion angle is less than 2 mrad. The energy concentration in the spot range is greater than 90% with a high system energy concentration, and the parallelism is good. This design overcomes the shortcoming of the small mechanical scanning angle of the MEMS lidar, and has good performance in collimation and beam expansion. It provides a design method for large-scale application of MEMS lidar.     

Synchronously scrambled diffuse image encryption method based on a new cosine chaotic map

We present a new cosine chaotic mapping proved by chaos theory test and analysis such that the system has good cryptography properties, wide chaos range, simple structure, and good sensitivity to initial value, and the mapping can meet the needs of chaotic image encryption. Based on the cosine chaotic system, we propose a new encryption method. First, according to the cyclic characteristics of the mapping, the cyclic information wave is simulated. Second, the quasi-Doppler effect is used to synchronously scramble and diffuse the image to obfuscate the original pixel. Finally, the XOR diffusion of image pixels is carried out by information wave to further enhance the encryption effect. Simulation experiment and security analysis show that the algorithm has good security, can resist the common attack mode, and has good efficiency.