Investigations of the E-O behavior in the poled polymer waveguide

The electro-optic (E-O) properties of the slab polymer waveguide induced by electric poling have been studied experimentally. The thin film waveguide was prepared by a synthesized polymer polypelargonamide and poled by applying voltage between the electrodes. I–V curves and E-O characteristics of the polymer films were in-situ measured during poling. In order to evaluate the molecular dipole orientation under the poling field, the absorption spectra of this film was observed by FTIR. The E-O performance of the polymer slab film was also estimated by the Mach–Zehnder interferometer.     

Full-wave analysis of dielectric waveguides at a given frequency

New variational formulation to compute propagation constants is proposed. Based on it, vector finite element method is proved to exclude spurious modes provided finite elements possess discrete compactness property. Convergence analysis is conducted in the framework of collectively compact operators. Reported theoretical results apply to a wide class of vector finite elements including two families of Nedelec and their generalization, the -edge elements. Numerical experiments fully support theoretical estimates for convergence rates.

     

声波导中的局部正交变换

In this paper, a local orthogonal transformation is created to transform the Helmholtz waveguide with curved interface to the one with a flat interface within the two-layer medium, and the Helmholtz equation uxx uzz k^2(x,z)u=0 is transformed to Vxx αVzz βVz γV=0. Numerical results demonstrate that the transformation is more feasible. This transformation is particularly useful for the research on wave propagation in acoustic waveguide.     

An Optimum Sectional Waveguide Taper for Quasioptical Transmission Lines

The paper considers an optimum sectional waveguide taper (OSWT) which at a shortest length of the transition region provides nearly adiabatic propagation of the fundamental mode between circular, widely different in diameter quasioptical transmission lines of class hollow dielectric waveguide (HDW). Derived as a consequence of coaxial circular-horn sections, the OSWT offers all the advantages of a simple geometry and lends itself to simple fabrication techniques. The relationships among the critical geometrical parameters and the loss calculation formulae are presented. The comparison studies show that even at a few sections, the OSWT is almost as good in performance as the parabolic taper, but the OSWT is much better from a mechanical viewpoint. And compared to the ordinary linear taper, the OSWT allows essential cut in length and loss with the broadbandness kept. The HDW-based four-sectional OSWT has been fabricated and tested in a quite broad wave range 2,5-8 mm. The testing results lend a good support to the analytical formulae lying at the basis of the design software.     

Computation of the Reflection Coefficient of a Triangular Semiconductor Prism in a Rectangular Waveguide

In this paper we present a method to solve Maxwell's equations that enables to compute waveguide structure containing a semiconductor triangular prism. The numerical study has showed that the triangular prism in the waveguide has a wider frequency band in comparison with a square rod under equal conditions. The reflection coefficient dependencies on frequency, prism size and its permittivity have been computed. The algorithm and computer programme have been tested and compared with the numerical results and experimental data of the paper [1] with good agreement.     

一种硅基SiO_2波导耦合器的设计与分析

波导耦合器是组成光纤传感系统和光纤通信系统光收发组件及模块的重要元器件,是实现光收发模块一体化光电集成的基础。给出了一种用光纤陀螺系统的X型四端口波导耦合器的工作原理,采用有效折射率法和BPM(Beam propagation method)法建立了耦合器的数学模型,计算并分析了耦合器尺寸在尽可能小的情况下和在满足单模传输的条件下耦合器的耦合系数、有效耦合长度、分光比以及回波损耗等参数之间的关系,并对其关键技术进行了系统的研究。仿真结果表明,所设计的波导耦合器在低损耗情况下分光比可达到50%∶50%,耦合器全长为33.5mm,输入输出波导间距为410μm,芯层截面积为6μm×6μm。     

极化子荧光及其断层扫描对Ti:LiNbO3光波导表征研究

小极化子(Nb⁴⁺_Li)荧光处于700—950 nm谱段，对不同化学还原程度同组分的纯铌酸锂晶体的研究表明荧光的强度反映了化学还原程度的强弱.从小极化子浅层能级出发，提出以“1中心3级态跃迁”来描述小极化子的受激荧光过程.钛扩散铌酸锂光波导(Ti：LiNbO₃)表面还原程度的均匀性可能在波导制造的热扩散过程中被破坏.在对铌酸锂波导表面、深部的扫描结果中，荧光的强度呈现出表面与深部、波导内与外的差异，表面的强度是深部的6—8倍.研究表明，利用非损伤性的极化子荧光谱，对加工过程热处理进行检控是非常有效的.同时，波导内与外的荧光强度差异间接反映了波导的横切面的外形.     

同轴线-矩形波导结散射特性的数值分析

 提出了一种数值分析同轴线-矩形波导结散射特性的模式匹配方法。采用同轴线和矩形波导的本征模函数表示电磁场分量，通过同轴线-矩形波导结截面横向场分量匹配获得波导结的散射参数，引入电场模式匹配矩阵的解析形式提高了计算效率。给出了基于模式匹配法数值仿真的各种同轴线-矩形波导结散射特性及仿真结果分析，并与3维全电磁波分析软件HFSS的仿真结果进行了比较，二者非常吻合。模式匹配法计算效率高，能广泛应用于微波毫米波元器件及系统结构的设计与优化。     

2.5维圆波导开放边界截断的修正完全匹配层方法

 在时域有限差分算法中，完全匹配层是一种高效的吸收边界条件。通过在标准完全匹配层(PML)方程中添加具有物理意义的电导率和导磁率附加项，提出了修正完全匹配层(MPML)方法，给出了圆柱坐标下3维MPML方程，并应用于2.5维圆波导开放边界的截断计算。计算结果表明，在不同频率和模式的激励下，加入平滑电导率和导磁率附加项后，与标准PML方法相比，MPML方法的相对误差降低8~10 dB。     

高功率激光装置前端系统激光脉冲的时间整形及修正技术

针对激光惯性约束聚变实验研究对高功率激光驱动器前端系统复杂时间形状种子激光脉冲的需求,应用孔径耦合带状线集成波导整形系统设计了满足需要的前端整形激光脉冲。用一种新方法精确计算了孔径耦合带状线电脉冲整形器的耦合系数和孔径宽度的数值关系,并针对高衬比度整形激光脉冲的需求,提出了高衬比度双极型集成波导整形系统方案。由该系统可以得到100 ps脉冲前沿、1～3 ns脉冲宽度可调、高衬比度(大于100:1)、光滑无纹波调制、可精确满足神光Ⅱ八路及第九路装置需求的前端整形激光脉冲。