The use of carbon nanofibers microcolumn preconcentration for inductively coupled plasma mass spectrometry determination of Mn,Co and Ni

Based on carbon nanofibers (CNFs) as a solid phase extraction adsorbent, a microcolumn preconcentration method coupled to inductively coupled plasma mass spectrometry (ICP–MS) was developed for the determination of trace elements (Mn, Co and Ni). The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Mn, Co and Ni could be quantitatively sorbed on the microcolumn containing CNFs in the range of pH 6.0–9.0, and then eluted completely with 0.5 mol ml^− 1 HNO₃. A preconcentration factor of 150-fold was obtained. The detection limits for Mn, Co and Ni were 40, 0.4 and 8.0 pg ml^− 1, respectively, with relative standard deviations less than 6.0%. In order to validate the proposed method, two certified reference materials of human hair (GBW 07601) and mussel (GBW 08571), and water sample were analyzed with satisfactory results. The recoveries were between 95.0 and 114%.     

Transport efficiency in femtosecond laser ablation inductively coupled plasma mass spectrometry applying ablation cells with short and long washout times

Relative mass transport efficiencies of near infrared (λ = 795 nm) femtosecond laser generated brass aerosols in helium were measured by ICP-MS applying different ablation cells with short and long washout times. It was found that the transport efficiencies are independent of the cell used within the mutual experimental uncertainties. This finding was confirmed by additional measurements providing the absolute particle mass transport efficiencies of femtosecond laser ablation in He. Here, the transport efficiencies were determined by weighing the samples before and after ablation with a micro-balance, collecting the particles by low-pressure impaction, and evaluating the impacted masses quantitatively by total reflection X-ray fluorescence. Within the experimental uncertainties (± 9–19%) the same absolute transport efficiency (about 77%) was found for all cells applied. This efficiency value can be regarded as a lower limit of the absolute mass transport efficiency since mass losses in the impactor are difficult to quantify.     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

Slurry nebulization ICP-AES spectrometry method for the determination of tin in organotin(IV) complexes

This paper proposes a quick, novel method for tin determination in organotin chemicals by slurry nebulization inductively coupled plasma atomic emission (ICP-AES) spectrometry. The method was tested by the measurement of five organotin carboxylate complexes of known composition for obtaining simple stoichiometric data. The slurries were prepared by first dissolving the organotins in an adequate solvent (methanol, pyridine or acetone) well miscible with water and then adding this solution drop-by-drop to a 0.005% TX-100 tenzide solution while maintaining intensive mixing. Dynamic laser light scattering experiments showed that the average equivalent particle size in the resulting slurry was ≈0.3 μm for all samples and solvents. Under suitable ICP-AES measuring conditions, the signal recoveries were found to be between 101.8 and 106.6%, which allowed direct nebulization and calibration against aqueous solutions. Typically, 70 μg l⁻¹ detection limit and 1–5% relative S.D. on five replicates can be achieved by the described method.     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

高分辨等离子体质谱法直接测定高纯镓中的痕量元素

建立高分辨电感耦合等离子体质谱法(HR-ICP-MS)测定高纯镓样品中Be、Mg、A l、S i、Ti、V、Cr、Mn、Fe、Co、N i、Cu、Zn、Ge、As、Mo、Ag、Cd、In、Sb、Ba、Pb、B i等痕量元素的方法。样品用HNO3 HC l经微波消解后,试液直接进样用HR-ICP-MS法同时测定上述元素,在高分辨质谱测量模式下避免了大量的质谱干扰,详细地研究了HC l和高纯镓所产生的基体效应,以Sc、Rh、Tl作为内标元素校正了基体效应,讨论和确定了实验的最佳测定条件。结果表明,23种痕量元素的检出限在0.001~0.21μg/L之间;回收率在89.8%~111.6%之间,相对标准偏差(RSD)小于3.3%。     

电感耦合等离子体发射光谱测定稀土铝合金中稀土和非稀土元素

本工作用 ICP-AES 法测定稀土-6063变形铝合金中 La、Ce、Pr、Nd、Sm、Gd、Fe、Mg、Ti、Zn,Cu 和 Mn,本方法不用化学分离,可一次同时测定这些元素,并做了 ICP光源参数、基体量变化、酸度(HCl)变化、稀土总量变化、共存元素 Fe 和 Mg 量的变化对被测元素的影响。本方法速度快、准确度高(除 Cu 稍差)。回收率91.0～110.0%,相对标准偏差±1.4～8.0%。     

盐酸浸提-电感耦合等离子体发射光谱法测定烟草中的多元素

研究了用5mol/L盐酸煮沸提取烟叶中的部分金属元素，用ICP－AES测定浸提液，K、Ca、Mg、Cu、B、Ba、Zn获得了较满意的结果，P、Fe、Mn的测定结果稍微偏低。此方法操作简便、快速安全，特别适合大批量烟草样的快速检测。与硝酸－高氯酸湿消化法进行对照，结果吻合得较好。并测定了国家烟草标准样品GBW08514和GBW08515，其结果与标准值相符。     

Fractionation and Bioaccessibility of Manganese,Copper, Zinc,Cadmium, and Lead in Commercial Vegetable and Rice Baby Foods Using Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) with Central Composite Design (CCD)

Abstract

Herein the bioaccessibility of Mn, Cu, Zn, Cd, and Pb, selected from essential and toxic elements, was determined in commercially sold vegetable purees intended for infant and toddler consumption. Chemical fractionation studies using water, acetone, diethyl ether, chloroform:methanol, and n-hexane were employed to predict the importance of the protein and lipid parts of a matrix to assess the bioaccessibility data. In addition, in-vitro gastrointestinal digestion was performed to determine the bioaccessibility of the elements using a five level, three factor central composite design (CCD) to maximize the elemental solubility. The total elemental concentrations in all of the fractions were determined by inductively coupled plasma – mass spectrometry (ICP-MS). Based on the consumption of one jar of vegetable/rice-based baby food, Zn was 1.3% of the recommended dietary allowance and Mn was 4.2% of the adequate intake level, while Cu was almost 100% of the adequate intake level. Additionally, Pb was always below the detection limit and Cd was sometimes under the detection limit for the percent bioaccessibility. However, in some samples, Cd was as high as 80% of the tolerable weekly intake level depending on the body weight.     

水中矿物元素的ICP-MS分析

用ICP－MS对地下水、地表水和饮用水中的矿物元素进行了分析测定，实验证明用ICP－MS可以同时测定地下水，地表水和饮用水中矿物元素；该法灵敏度、精密度和准确度都能满足有关标准的要求，具有多元素同时分析，样品前处理简单，干扰少，测定快速，省事省力等优点。