Electrically conducting electrospun silk membranes fabricated by adsorption of carbon nanotubes

We present a simple method of obtaining electrically conducting electrospun silk non-woven membranes consisting of nanofibers with multi-walled carbon nanotubes (MWCNTs) adsorbed on their surface. Nanofibrous membranes with fibroin diameters of 460 ± 40 nm were formed from aqueous Bombyx mori fibroin solution by electrospinning. The MWCNTs adhered well to the surface of the highly porous silk nanofibrous membranes when Triton X-100 was used as the surfactant for the dispersion of the MWCNTs in aqueous media. The electrical conductivity of the membranes was 2.4 × 10⁻⁴ S/cm due to the presence of the MWCNTs on their surface. In addition, the strong interaction between the MWCNTs and nanofibers keeps them from separating each other, even after ultrasonication. The combination of the high conductivity of the membranes and the simple process used to fabricate them could lead to significant advances in the development of new materials, such as electromagnetic interference shielding or electrostatic dissipation membranes.     

Chemisorption of SO2 and Cl2 on indium oxide

The mutual influence of SO₂ and Cl₂ during their consecutive chemisorption on the In₂O₃ surface has been investigated. It was found that SO₂ is chemisorbed in the uncharged form, and the amount of chemisorption decreases as the temperature increases. The preliminary chemisorption of Cl₂ results in a dramatic decrease in the amount of SO₂ sorbed and in a change in the character of the bonding of SO₂ with the oxide surface. When SO₂ is sorbed first, the temperature of the formation of chlorides during subsequent chemisorption of Cl₂ decreases.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1718–1721, October, 1994.     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。     

利用天然生物分子合成导电聚苯胺的研究

本文综述了利用多种不同的天然生物分子如蛋白质(包括酶和氨基酸)、糖类、核酸、多巴胺和柠檬汁等为模板合成导电聚苯胺的研究进展。本文首先介绍了这些天然生物分子对产物聚苯胺的手性、导电率、形态以及其它方面性质的影响,归纳了利用天然生物分子合成导电聚苯胺的研究进展,然后分析了导电聚苯胺合成过程中面临的问题并对该领域的未来发展进行了展望,以期为制备性质优良和环境友好的新型导电聚苯胺材料提供有益的参考。     

La0.8Sr0.2Ga0.8Mg0.2O3与La0.8Sr0.2Ga0.8Mg0.15Co0.05O3电导的对比

采用固相合成法制备了La0.8Sr0.2Ga0.8Mg0.2O3(LSGM8282)和La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5), 利用四电极交流阻抗法和Hebb-Wagner 极化法对比研究了两种材料的总电导率和电子电导率. 实验结果表明, LSGM8282 的总电导率与氧分压无明显依赖关系, 而LSGMC5 的总电导率在高氧分压区随氧分压降低而增加,在中等氧分压区域基本保持不变. 在973-1173 K的温度范围内, LSGM8282的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和1/4.在1073-1173 K的温度范围内, LSGMC5的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和约为1/8, 表明LSGMC5的空穴产生机制可能与LSGM8282不同. LSGM8282 的氧离子电导率与氧分压无关, 而LSGMC5 的氧离子电导率在高氧分压区随氧分压的减小而增加.     

Two-point Padé approximants for formal Stieltjes series

We prove that certain two-point Padé approximants occupying the diagonal of the Padé table form monotone sequences of lower and upper bounds uniformly converging to a Stieltjes function. The results can be applied to the theory of inhomogeneous media for the calculation of the bounds on the effective transport coefficients of heterogeneous materials.     

Hydraulic conductivity of rock fractures

The flow of a single-phase fluid through a rough-walled rock fracture is discussed within the context of fluid mechanics. The derivation of the cubic law is given as the solution to the Navier-Stokes equations for flow between smooth, parallel plates - the only fracture geometry that is amenable to exact treatment. The various geometric and kinematic conditions that are necessary in order for the Navier-Stokes equations to be replaced by the more tractable lubrication or Hele-Shaw equations are studied and quantified. In general, this requires a sufficiently low flow rate, and some restrictions on the spatial rate of change of the aperture profile. Various analytical and numerical results are reviewed pertaining to the problem of relating the effective hydraulic aperture to the statistics of the aperture distribution. These studies all lead to the conclusion that the effective hydraulic aperture is less than the mean aperture, by a factor that depends on the ratio of the mean value of the aperture to its standard deviation. The tortuosity effect caused by regions where the rock walls are in contact with each other is studied using the Hele-Shaw equations, leading to a simple correction factor that depends on the area fraction occupied by the contact regions. Finally, the predicted hydraulic apertures are compared to measured values for eight data sets from the literature for which aperture and conductivity data were available on the same fracture. It is found that reasonably accurate predictions of hydraulic conductivity can be made based solely on the first two moments of the aperture distribution function, and the proportion of contact area.     

Temperature- and hydration-dependence of molecular mobility in seeds

Broad-band ac dielectric relaxation spectroscopy (DRS) and various techniques of thermally stimulated currents (TSC) have been used to investigate molecular mobility in cereal and legume seeds, over wide ranges of water content and temperature. We focused our interest on the detailed study of the interactions between water and seed constituents. The results are quantitatively discussed, using various concepts dictated by the experimental techniques employed and in relation to the protein and carbohydrate contents of the seeds. In addition, the glass transition in the seeds, freezing and melting of water, and the protonic conduction process have been studied in some detail.Financial support through the Greek Ministry of Industry, Energy and Technology (Secretariat of Research and Technology), the Czech Ministry of Education, Youth and Sport (Dept. of International Scientific and Technological Cooperation), and the Empirikos Foundation is gratefully acknowledged.     

Multicomponent electrolyte systems: Dependence of ionic mobilities on aqueous organic solvent structure

Ionic mobility data for multicomponent electrolyte systems at low concentrations are scarce due to experimental difficulties and are actually restricted to aqueous solutions of alkali chlorides. Some new results are presented which have been obtained by using a radiotracer method valid even if one of the ionic species is present at very low concentrations (tracer ion). The following electrolyte systems (two electrolytes with a common ion in a solvent) have been investigated at a 0.5N total ionic strength: NaNO₃–AgNO₃, KNO₃–AgNO₃, LiNO₃–AgNO₃ either in pure water or in water-rich (acetonitrile or dimethylsulfoxide) mixed solvents. Since ionic conductivity data processing by an extended law generalized to mixtures, such as that proposed by Quint and Viallard, has proved to be delicate to handle, our experimental results have been compared with the qualitative predictions of the classical Onsager-Fuoss limiting law. The main conclusion of this work is to give clear experimental evidence of the inability of any continuum theory to predict the ionic mobilities when solvent structural effect have to be taken into account. Consequently, the ionic behavior, particularly that of the Ag⁺ ion, has been interpreted in terms of preferential solvation and solvent microscopic structure. The trace mobility measurements reflect the maximum structural effect on the ionic transport properties.     

Uncertainty of the Thermal Conductivity Measurement Using the Transient Hot Wire Method

This work deals with uncertainty analysis of the thermal conductivity measurement using the transient hot wire method. The characterization is made from a sample of low-density, polyethylene BRALEN SA 200-22. The utilized experimental data are obtained from the test measurements performed on the air at room temperature. The sources of measurement errors are analyzed and the uncertainty of the measured value of the thermal conductivity is evaluated. The analysis shows that in the present case the uncertainty of the thermal conductivity measurement is about ±3.3% for 68% confidence level.This revised version was published online in November 2005 with corrections to the Cover Date.