电化学双电层电容器电极材料——豌豆荚基活性炭的制备与表征

以豌豆荚为碳源、ZnCl₂或KOH为活化剂制备了活性炭, 并用作双电层电容器的电极材料. 采用比表面及孔隙度分析仪表征了豌豆荚基活性炭的孔结构. 通过KOH或ZnCl₂活化后, 活性炭比表面积从1.69 m²·g^-1增大到2237或621 m²·g^-1. 采用循环伏安法和恒流充放电测试技术表征了豌豆荚基活性炭的电化学特性. 结果表明: 在6 mol·L^-1 KOH溶液中经KOH活化处理的活性炭的质量比电容高达297.5 F·g^-1, 并具有良好的充放电稳定性, 在5 A·g^-1的高电流密度下循环充放电500次后, 质量比电容仅衰减8.6%.     

一种应用于CMOS图像传感器的电容阵列PGA研究

研究了一种应用于1 024×1 024CMOS图像传感器中的温度计码电容阵列型可编程增益放大器（PGA）。该PGA采用开关电容阵列结构,通过改变输入与反馈电容值,实现了0～18dB的增益;同时,该PGA具有结构简单、电容阵列面积小、带宽大和反馈系数大等特点,其增益带宽50MHz、总谐波失真（THD）小于50dB。该PGA的信号处理能力完全满足12MHz速率、69dB动态范围CMOS图像传感器内部集成ADC对模拟输入信号的要求。     

Analysis on surface charging of insulator prior to flashover in vacuum

Prior to the flashover across an insulator in vacuum, the insulator surface is usually charged. It is of great importance to investigate the charging phenomena for better understanding the flashover characteristics. It is considered that there are two kinds of mechanisms closely related to the surface charging of insulator i.e., the secondary electron emission occurred over an insulator, and while employing a perfect electrode contact ahead of electron emission into vacuum, the charge injection and accumulation occurred inside the surface layer of an insulator. Based on the rigorous analysis of the kinetic processes of both primary and secondary electrons, the related surface charges were theoretically deduced. Involving the detrapping of charges trapped and the recombination of charges injected, the charging process due to charge injection and accumulation was analyzed. Some formulas were given to express the density of surface charges.     

Secondary electron emission control in X-ray photoelectron spectroscopy

Secondary electron emission (SEE) is a major player in surface charging during X-ray photoelectron spectroscopy (XPS); its characteristics and applicability as a current source for electrical measurements are studied. We employ sample biasing and a top retarding grid to control the photoelectron current, and further compare their I–V characteristics with direct spectroscopy of the secondary electrons. Using silica-coated gold substrates, the effect of sample work function on the emitted secondary electrons is shown and fine control over the surface potential gradients, in the range of 10–100 meV, is achieved. XPS-based chemically resolved electrical measurements (CREM) can thus be extended to the positive current regime.     

μs级充电时水介质同轴电容击穿实验研究

 研制了水介质同轴电容的实验装置，在此装置上进行了大量的实验。测得μs级充电时，水介质同轴电容分别在正脉冲和负脉冲充电时的击穿电压，负击穿电压的理论值与测量值相差较大，正击穿电压的理论值大于测量值的18%左右，对此实验结果进行了分析。此外，当去离子水的电阻率从13MΩ·cm降到5 MΩ·cm时，水介质同轴电容器的击穿电压基本不变。     

相干平行板电容器对外场的动态响应

基于介观体系动态响应的自洽理论,讨论了介观相干平行板电容器的电容.结果表明相干电容器的电容对外场频率有很强的依赖关系,并且是随频率变化的复变函数.该电容随频率的变化关系呈现出一个非常有意义的特性,即电容虚部曲线有一个较尖锐的峰,它正好与电容实部的极小位置相对应,而进一步研究发现它们与该电容体系中的类等离子体激发相联系.另外,也讨论了介观电容的尺寸效应,发现当极板间距很大时,电容值和宏观的几何电容结果趋于一致.     

基于垂直结构的有机光发射晶体管制备与性能研究

制备了一种有机垂直光发射晶体管, 兼具有机发光二极管的发光和晶体管的开关调节两个功能.其结构为一个有机发光单元垂直堆叠在一个电容单元上,两单元通过一个共有的源电极连在一起.当电容单元被充电时,积累在源电极的电荷能有效地调节源极与有机层之间的载流子注入势垒,从而达到控制源漏输出电流的大小,最终控制发光单元发光的强度.实验结果表明,器件可提供02 mA的输出电流,其大小可驱动发光单元发光,工作电压（开启电压）为6 V.这种垂直集成方案,实现了器件多功能化,为有机发光二极管有源矩阵驱动的实际应用提供了一种新的解决方法. 关键词： 有机光发射晶体管 垂直 电容     

航天器内部充电效应及典型事例分析

航天器内部充电效应是由空间高能电子诱发的,通常发生在航天器内部以及表面绝缘材料深层,所产生的放电击穿及静电放电脉冲干扰较表面充电更为严重. 对内部充放电的一般规律进行了总结,并就一次典型的航天器异常事件,从异常的时空表现特征及其与高能电子环境扰动的相关性角度进行了深入分析和定量计算,得出了高能电子产生的内部充电引起的卫星异常的结论,为卫星异常诊断提供了范例.     

Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor

One-dimensional nanostructured manganese dioxide/polypyrrole (MnO₂/PPy) composite was prepared by in situ chemical oxidation polymerization of pyrrole in the host of inorganic matrix of MnO₂, using complex of methyl orange (MO)/FeCl₃ as a reactive self-degraded soft-template. The morphology and structure of the composite were characterized by infrared spectroscopy (IR) X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the MnO₂/PPy composite consists of α-MnO₂ and PPy with nanotube-like structure. Electrochemical properties of the composite demonstrated the material showed good electrochemical reversibility after 500 charge-discharge cycles in the potential range of −0.4 to 0.6 V, the tube-like nanocomposite has the potential application in electrochemical capacitor.     

基于路网的电动汽车快速充电站布局决策研究

大力发展和推广纯电动汽车已成为全世界众多国家的共同选择。但电动汽车有限的续航能力及公共快速充电设施的缺乏,制约着人们的使用和长途出行。本研究针对我国公共快速充电网络建设亟待完善的问题,基于我国主干高速公路网络,对服务途中充电需求的快速充电站科学分布问题建立分布决策模型。研究表明,对续航能力低于200公里的电动汽车,应用最优策略分布的快速充电站数量从50座增加到250座时,可将途中充电需求覆盖率从50%左右提高到90%以上,而对续航能力超过250公里的电动汽车,150座按最优策略分布的快速充电站即能覆盖至少96.49%的途中充电需求。通过对不同续航能力和不同充电站数量约束下共30种情形的分析,本研究不仅能为多情形下充电站分布问题提供最优选址和数量组合决策方案,也为我国充电基础设施的完善及电动汽车产业可持续发展提供有力的理论支持和政策建议。