盐酸浸提-电感耦合等离子体发射光谱法测定烟草中的多元素

研究了用5mol/L盐酸煮沸提取烟叶中的部分金属元素，用ICP－AES测定浸提液，K、Ca、Mg、Cu、B、Ba、Zn获得了较满意的结果，P、Fe、Mn的测定结果稍微偏低。此方法操作简便、快速安全，特别适合大批量烟草样的快速检测。与硝酸－高氯酸湿消化法进行对照，结果吻合得较好。并测定了国家烟草标准样品GBW08514和GBW08515，其结果与标准值相符。     

苏州荠苧总黄酮与微量元素含量的测定

采用分光光度法测定了苏州荠芋的总黄酮含量；采用了等离子发射光谱法测定了其元素含量。结果表明，苏州荠芋总黄酮的含量分别为55．31mg/g(7月采收)、65．00mg/g(8月采收)；含K、Ca、Mg等多种常量元素；含Cu、Fe、Mn、Zn、Cr、Co等多种人体必需的微量元素，其中Fe含量最高；而有害重金属元素Hg未检出，Pb和AS的含量均较低(小于药典规定量)。可见8月采收的苏荠芋总黄酮含量较高，苏州荠芋含多种人体必需的微量元素，有害重金属含量低，具有较大的开发价值。     

液相色谱-串联质谱法同时测定大黄鱼中20种磺胺类药物残留

建立了一种液相色谱-电喷雾串联质谱同时测定大黄鱼中20种磺胺类药物残留的方法.均质样品先后用乙腈、二氯甲烷提取,合并提取液,取部分提取液经氮吹浓缩.残渣用1 mL流动相溶解,饱和正己烷脱脂净化.采用ZORBAX Eclipse XDB-C8色谱柱,以含0.2%乙酸的水溶液和甲醇(7: 3)为流动相,梯度洗脱,在电喷雾-多反应监测离子模式下,进行定量定性分析.方法的定量限为5 μg/kg;以标准加入法计算回收率,在10～40 μg/kg添加范围内,平均回收率为79.6%～109%;相对标准偏差为3.55%～16.5%.     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.     

Extraction-spectrophotometric study on the vanadium(V)-2,3-dihydroxynaphthalene — iodonitrotetrazolium chloride — water — chloroform system and its analytical application

The formation of a new ternary ion-associate complex of vanadium(V) with 2,3-dihydroxynaphthalene and iodonitrotetrazolium chloride with a composition ratio of 1:2:1 is reported. The complex is quantitatively extracted from water into chloroform. The molar absorptivity (ɛ) of the extract at λ _max=340 nm is 2.5 × 10⁴ dm³/mol cm, and Beer’s law is obeyed for concentrations ranging from 0.1 to 0.9 μg/cm³ V(V). The following constants are determined: the extraction constant, the association constant, the distribution constant, and the recovery factor. The effects of foreign ions and reagents are studied. A selective and sensitive method is developed for determination of vanadium in steels.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Progress on the application of electrochemiluminescence biosensor based on nanomaterials

In this review, we check out the number of published literature in the field of ECL biosensors trends during nearly a decade, and compare the research status of four different types of biosensors; summarize the application forms of nanomaterials in ECL biosensor. We have an overview of the building patterns and application example of the four main types of biosensors in the paper.     

Validation of an analytical method to determine trace metal impurities in fluoride compounds by flame atomic absorption spectroscopy

 The development of an analytical method for the determination of some heavy metals (Fe, Cu, Co, Zn and Ni) in fluoride compounds [Cu(BF₄)₂, Sn(BF₄)₂, Pb(BF₄)₂ and HBF₄] by flame atomic absorption spectroscopy is described. This method is to be used as a routine analytical method in an industrial quality control laboratory. To this end the "performance characteristics" of an instrumental analytical method such as matrix effects, sensitivity, linearity, detection and quantitation limits, precision and accuracy were evaluated for every system under study. The results of these investigations showed that non-spectral interferences (due to the presence of large concentrations of major metals such as Cu, Sn and Pb) were observed. Nevertheless it was possible to define a matrix concentration interval where matrix effects were not statistically significant, and therefore a direct calibration approach could be used as the calibration tool whenever the major metal concentration was not higher than 40×10^–3 kg l^–1. A guide to the developement of an analytical method for trace metal determination is provided. General tools for quality control have been used in order to show how an analytical method can be tested daily and evaluated in a convenient manner. Received: 29 January 1997 Accepted: 11 March 1997     

中药片仔癀,六味地黄丸中的微量铬,铅和镉石墨炉原子吸收法测定

本文采用ＧＦ－ＡＡＳ加平台技术，基体改进剂，测定了中药片仔癀，六味地黄丸中铬、铅和镉的含量，铬、铅和镉的线性范围分别为０－０．８ｎｇ／ｍＬ，０－５０ｎｇ／ｍＬ，０－５ｎｇ／ｍＬ，回收率分别为１０２－１０３％，９９－１０１％，９７．５－９８％，本方法简便快速、准确。