Passive automatic exposure mechanism

In this paper, we will propose a passive automatic exposure mechanism. Different from general automatic exposure mechanism, the passive exposure mechanism directly searches suitable exposure images through the content of images. As exposure is one of the main factors to successfully take pictures, how to find an accurate exposure value is an important issue. Passive automatic exposure is the new trend and key issue of image processing. We will experiment and prove that the method we propose is effective.     

HL-1M托卡马克中的中子通量和辐射剂量当量测量

用5台带有慢化剂(聚乙烯)的BF3₃正比计数管中子探测器测量中子通量和剂量当 量.4台 置于HL_1M装置的四周,分别测量了在氘等离子体条件下,因欧姆加热和波加热产生的热核聚 变中子产额、中子通量和剂量,以及氢等离子体条件下因高能x射线引起的光致核反应而产生 的光致中子. 另一台流动于其他6个观察点,主要监测中子剂量当量. 在D_D聚变条件下,实测 中子产额与计算值作比较,两者在数量级上大体一致. 中子辐射剂量当量远低于国家和部颁 标准,更低于国际防护委员会推荐的中子辐射允许剂量当量 关键词： 3正比计数管')" href="#">BF3₃正比计数管 光致中子 氘_氘聚变中子 剂量当量     

Assessment of fast and thermal neutron ambient dose equivalents around the KFUPM neutron source storage area using nuclear track detectors

A set of five ²⁴¹Am–Be neutron sources are utilized in research and teaching at King Fahd University of Petroleum and Minerals (KFUPM). Three of these sources have an activity of 16 Ci each and the other two are of 5 Ci each. A well-shielded storage area was designed for these sources. The aim of the study is to check the effectiveness of shielding of the KFUPM neutron source storage area. Poly allyl diglycol carbonate (PADC) Nuclear track detectors (NTDs) based fast and thermal neutron area passive dosimeters have been utilized side by side for 33 days to assess accumulated low ambient dose equivalents of fast and thermal neutrons at 30 different locations around the source storage area and adjacent rooms. Fast neutron measurements have been carried out using bare NTDs, which register fast neutrons through recoils of protons, in the detector material. NTDs were mounted with lithium tetra borate (Li₂B₄O₇) converters on their surfaces for thermal neutron detection via and nuclear reactions. The calibration factors of NTD both for fast and thermal neutron area passive dosimeters were determined using thermoluminescent dosimeters (TLD) with and without a polyethylene moderator. The calibration factors for fast and thermal neutron area passive dosimeters were found to be 1.33 proton tracks and 31.5 alpha tracks , respectively. The results show variations of accumulated dose with the locations around the storage area. The fast neutron dose equivalents rates varied from as low as up to whereas those for thermal neutron ranged from as low as up to . The study indicates that the area passive neutron dosimeter was able to detect dose rates as low as 7 and from accumulated dose for thermal and fast neutrons, respectively, which were not possible to detect with the available active neutron dosimeters.     

相对孔径与曝光量

本文对照相物镜相对孔径的定义、光圈数、像面照度、像面曝光量以及它们之间的关系进行了讨论。     

电子束参量对轫致辐射照射量角分布的影响

本文研究了电子束半径,发射度及能量等参量对闪光X射线照射量在1m处角分布的影响。求得了使中心照射量最大,束半径与发射度之间应满足的拟合关系,表明了电子束能量越高,发射度越小,那么中心照射量就越大,照射量的空间分布就越理想。对电子细束入射位置和入射方向使用了解析法和随机抽样法求出,两种方法的数值计算所得的照射量分布符合得比较好。     

Effect of neutron irradiation on optical spectra of α-Al2O3 and α-SiO2 single crystals

Using two crystal dielectrics (α-Al₂O₃ and α-SiO₂) as examples, the author studied the effect of large neutron-radiation doses on their optical spectra. The variation in IR spectra in the region of α-SiO₂ stretching and deformation vibrations is investigated; its relation to changes in the structure of the irradiated crystal is discussed. Institute of Nuclear Physics, Academy of Sciences of the Republic of Uzbekistan, Ulugbek Settlement, Tashkent, 702132. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 66, No. 1, pp. 135–138, January–February, 1999.     

Investigation of shrinkage-induced stresses in stereolithography photo-curable resins

An experimental study has been undertaken to investigate the shrinkage characteristics of acrylic-based and epoxy-based stereolithography (SL) photopolymer resin systems after they have been laser cured and post-cured under ultraviolet (UV), and thermal exposure. The induced residual stresses and strains were determined by the shadow moiré and the hole-drilling strain-gage methods. Out-of-plane displacements (warpage) of acrylic-based post-cured resin plates were recorded by means of the shadow moiré method and correlated to the shrinkage strains by theoretical analysis. The induced residual stresses in the epoxy-based cylindrical resin specimens were determined from strains of three-element strain-gage rosettes of the blind-hole drilling method. Results are presented for the shrinkage stresses and strains for both material systems as a function of the post-curing process (UV, thermal). It was found that the shrinkage strains in the acrylic-based photopolymer resin were of considerable magnitude, while thermal post-curing resulted in higher shrinkage stresses for both material systems. The values of the shrinkage stresses compare well with those of the existing literature.     

液电冲击波的实验研究

本文用水下电火花微爆炸产生重复性极佳的球形冲击波,用双曝光全息干涉法测量了液电冲击波的传播,并观察到冲击波与水下电极之间的相互作用.实验结果表明此法适用于液电冲击波的测量,特别适用于由冲击波波前位移来确定其峰值压力分布.     

电离辐射环境下的部分耗尽绝缘体上硅n型金属氧化物半导体场效应晶体管可靠性研究

随着半导体技术的进步, 集成小尺寸绝缘体上硅器件的芯片开始应用到航空航天领域, 使得器件在使用中面临了深空辐射环境与自身常规可靠性的双重挑战. 进行小尺寸器件电离辐射环境下的可靠性试验有助于对器件综合可靠性进行评估. 参照国标GB2689.1-81恒定应力寿命试验与加速寿命试验方法总则进行电应力选取, 对部分耗尽绝缘体上硅n型金属氧化物半导体场效应晶体管进行了电离辐射环境下的常规可靠性研究. 通过试验对比, 定性地分析了氧化物陷阱电荷和界面态对器件敏感参数的影响, 得出了氧化物陷阱电荷和界面态随着时间参数的变化, 在不同阶段对器件参数的影响. 结果表明, 总剂量效应与电应力的共同作用将加剧器件敏感参数的退化, 二者的共同作用远大于单一影响因子.