Controlled phase separations in solutions of soluble polyelectrolyte complex of DIVEMA (copolymer of divinyl ether and maleic anhydride)

Copolymer of divinyl ether and maleic anhydride (DIVEMA) is known to possess some anti-tumor and immune-stimulating activity and use as a drug carrier in anti-tumor drug delivery systems. Samples of DIVEMA of different degrees of polymerization were synthesized and characterized. Interaction of the hydrolyzed water-soluble DIVEMA polyanions with poly(N-ethyl-4-vinylpyridinium) cations (PEVP) has been studied. According to the potentiometry data, almost all carboxylic groups of the polyanions were able to form ion pairs with PEVP. In aqueous and water-salt solutions, formation of either soluble or insoluble polyelectrolyte complexes occurred depending on pH, ratio of the oppositely charged groups, and degree of polymerization of PEVP and/or DIVEMA. The phase separations followed general rules revealed by studying mixtures of PEVP and polycarboxylic acids. However in the case of DIVEMA, a significant broadening of the region for insoluble complexes at the expense of the region of soluble complexes was established. The data obtained demonstrate plausible advantages of the complex formation as the non-covalent modification of the polymeric carrier that endow DIVEMA with the ability for reversible soluble-insoluble transformation, in particular at physiological pH and ionic strength.     

荧光探针法研究PEO-PPO嵌段共聚物胶束的特性

利用十六烷基罗丹明Ｂ作为主要荧光探针，研究了水溶性嵌段共聚物Ｐｌｕｒｏｎｉｃ Ｆ－６８在水溶液中的胶束化行为，研究表明，Ｐｌｕｒｏｎｉｃ－Ｆ－６８形成胶束的监界胶束浓度与温度有极大关系，随温度的升高，其ＣＭＣ值急剧下降，并且温度对胶束的性质也有很大，影响温度升高可导致胶束的微观粘度增大，表现出很强的负粘－温效应，并发现引起这种负粘－温效应的主要原因是Ｐｌｕｒｏｎｉｃ Ｆ－６８分子中聚环氧乙烷（ＰＥ     

Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers

The stabilization of polyolefins against γ-sterilization has been studied with single or binary additive system. The present attempt is to utilize synergistic mixtures of stabilizers which are approved for food contact applications. Ethylene-propylene (EP) copolymer has been melt-mixed with hindered amine stabilizers (HAS), phenolic antioxidants and organo-phosphites (hydroperoxide decomposer). Samples were sterilized with different doses of γ-radiation. Stabilization was characterized in terms of changes in the functional groups (oxidation products), tensile properties, yellowing and surface morphology by FTIR spectroscopy, Instron, colorimetry (reflectance) and scanning electron microscopy (SEM), respectively. Results were discussed by comparing the stabilizing efficiency of mixtures with and without phenol system. Among phenol containing systems, where we mostly observe discoloration due to the oxidation of hindered phenol and the combination of secondary HAS, tertiary HAS, organo-phosphite and hindered phenol exhibited improved stabilization efficiency than single or binary additive systems. The mixture of secondary HAS and tertiary HAS, has shown antagonistic effect of stabilization whereas their combination with organo-phosphite has exhibited synergistic effect of stabilization even at higher doses of γ-sterilization. The effects have been explained through the interaction between the stabilizers.     

SBS与甲基丙烯酸丁酯本体接枝反应的研究

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸丁酯(BMA)既作溶剂又作为单体与苯乙烯-丁二烯嵌段共聚物(SBS)进行接枝共聚反应。用红外光谱、核磁共振谱及透射电镜表征了接枝共聚物(SBS-g-BMA)的组成及结构,讨论了时间、温度及SBS和BPO的用量对接枝的影响。     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

用含偶氮基的聚苯乙烯大分子引发剂合成两亲性嵌段共聚物

采用含偶氮基的聚苯乙烯预聚物（ＰＳ ＡＣＰＣ）作为引发剂，合成了苯乙烯（Ｓｔ）分别与甲基丙烯酸（ＭＡＡ）、甲基丙烯酸（β 羟丙酯）（ＨＰＭＡ）的嵌段共聚物，考察了ＰＳ ＡＣＰＣ引发第二单体的聚合反应行为，以及影响第二单体转化率和均聚物含量、共聚物组成的因素．用溶解性、凝胶渗透色谱（ＧＰＣ）、红外光谱（ＩＲ）、核磁共振（ＮＭＲ）、动态接触角（ＤＣＡ）等表征了嵌段共聚物．     

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响

聚己内酯聚醚嵌段共聚物和共混物的表面性质对其药物释放行为的影响王卫华，贝建中，王智峰，王身国（中国科学院化学研究所北京１０００８０）关键词聚己内酯聚醚嵌段共聚物，共混物，电子能谱，表面性质，药物释放行为聚己内醋（ＰＣＬ）具有优良的药物通透性和生物相容...     

SYNTHESIS OF BLOCK COPOLYMER FROM 5,6 -BENZO-2-METHYLENE-1,3-DIOXEPANE AND METHYL ACRYLATE VIA ATOM TRANSFER RADICAL POLYMERIZATION

Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1, 3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl α-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) withterminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in theATRP of BMDO. The Structure of block copolymer was characterized by ~1H-NMR spectroscopy. Molecular weight andmolecular weight distribution were determined on a gel permeation chromatograph (GPC).