OBE理念推动化工设备机械基础课程的改革实践*

以应用型人才培养为目标,探索了利用OBE理念推动化工设备机械基础课程及其课程设计的改革实践。以OBE理念为指导,结合CDIO和LBL的教学模式,提出在教学内容、平台在线课程建设、第二课堂教学、课程设计和考核方法等方面的改革方案,增强了课程的应用性和成果产出,不仅提高了学生对理论知识掌握的牢固度,更提高了学生的实践能力、对知识的灵活应用能力和创新能力,与实际应用连接更加紧密,有效地实现了高素质的应用型人才输出。     

Schnell-Methode zur Umsetzung von Kohlenwasserstoffen zu Wasserstoff für die Isotopenanalyse

Es wird eine weiterentwickeltes, isotopenanalytisches Verfahren zur probenchemischen Umsetzung von Kohlenwasserstoffen mit Chromium zu Wasserstoff bei 1300 K vorgestellt. Die erzielten Testergebnisse zeigen anhand der gemessenen δD-Werte, daβ Quarzöfen bei diesen Temperaturen noch keine die Isotopenmeβwerte beeinflussende Diffusion von Wasserstoff durch die Wandung zulassen. Auβerdem erfolgte die Reaktion nahezu spontan und vollständig, was die Methode zeitlich sehr effektiv macht.

A modified isotope analytical method is presented for the chemical reaction of hydrocarbons with chromium at 1300 K to form hydrogen. The test results obtained (i.e. the measured δD-values) show that at this temperature quartz heating tubes do not allow hydrogen to diffuse through the wail, which fact would influence the isotopic composition. Furthermore the reaction proceeds nearly spontaneously and quantitatively, which yields an effective method, especially with respect to time.     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity.Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-acoess and hazardous.In addition.optical fiber dosimeters are immune to electrical and radio-frequency interference.In this paper,a novel remote optical fiber radiation dosimeter is described.The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL.The measuring range of the dosimeter is from 0.1 to 100 Gy.The equipment is relatively simple and small in size,and has low power consumption.This device is suitable for measuring the space radiation dose and also can be used in high radiation dose condition and other dangerous radiation occasions.     

凝胶渗透色谱-十八角激光散射仪(GPC-MALLS)的应用:浓度、流量、温度对高分子分子量及其分布的影响

采用凝胶渗透色谱(GPC)/示差折光指数(RI)/十八角激光散射仪(MALLS)联用技术,以乙二胺改性聚乳酸(DMPLA)为样品,溶解于四氢呋喃(THF)中,先单机测定其dn/dc(比折光指数增量)值与A2(第二瑞利系数)值,后在不同的浓度、流量、温度条件下,研究其分子量及其分子量分布的变化。结果表明:dn/dc值为0.0521±0.0017 mL/g,A2值为(4.518±0.613)e-3 mol mL/g?,随着浓度、流速的增加,分子量也在增加,对分布影响不大,温度对分子量的测定影响不大,然而经过分析,认为在3.0mg/ml、1.0ml/min、34℃时测量的数据比较合适。     

浑水中非均匀光场探测图像方法

分析了传统的水下观测和激光观测技术在能见度约为0.5~1.5 m的浑浊水域和0.2 m的特浑水域观测遇到的理论和技术上的局限性.叙述了一种非均匀光场集束光水下目标图像探测方法和系统，并在各种浑浊水质中进行其特性的试验.试验结果表明该系统基本上解决了浑浊水中的观测问题.     

The development of recent high-power ultrasonic transducers for Near-well ultrasonic processing technology

With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology.With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology     

Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE)

The characteristics of engineering plastics used in the preparation of electrical and electronic equipment were studied. More specifically, their thermal response was recorded by DSC experiments, the rheological properties were investigated via MFI tests and the mechanical properties were evaluated with tensile tests. The aim was to establish a procedure for recycling the same engineering plastics deriving from waste of electrical and electronic equipment (WEEE), which offers the additional advantage of using the as-received waste stream as a recyclable mixture, i.e. without sorting and classification of its components.The experimental results showed that blends of PC with ABS or ABS/HIPS can be prepared by direct mixing and this, would allow easy handling of the engineering plastics coming from WEEE, i.e. blending without the need of sorting. These mixtures can be easily processed and display acceptable mechanical properties with reasonable cost. Therefore, the processing characteristics and properties of the systems studied in this work could be the key for the design of an interesting approach for handling solid plastic waste from electrical and electronic devices.     

旋转流体实验设备改造

论述了旋转流体实验装置改造所存在的问题及改进的措施。     

Robust supergain beamforming for circular array via second-order cone programming

The phenomenon of supergain for a circular array and its robust beamforming are presented. The coplanar superdirective array gain of the circular array, although it is not so extreme as an endfire line array, outperforms a lot over that of a conventional delay-and-sum beamformer in isotropic noise fields when the inter-element spacings are much smaller than one-half wavelength. However, optimum beamforming algorithms can be extremely sensitive to slight errors in array characteristics. The performance are known to degrade significantly if some of underlying assumptions on the sensor array is violated. Therefore, white noise gain constraint is used to improve the robustness of the supergain beamformer against random errors. We show that the design of the weight vector of robust supergain beamformer can be reformulated as a form of second-order cone programming and resolved efficiently via the well-established interior point method. Results of computer simulation for a 24-element circular array confirm satisfactory performance of the approach proposed in this paper.     

Experimental study of bubble dynamics in the neighbourhood of a vertical incomplete boundary

The bubbles have been widely used in biomedical field, military and chemical industry. The liquid jet generated by the bubble collapse through an orifice is utilized in needle-free injections and inkjet printing. In this paper we devised synchronized triggering equipment, experimentally investigated the mechanism in the interaction of an electric-spark generated a single bubble and a vertical wall with an air-back opening. Detailed observations were recorded and described for bubble oscillation, migration, jetting, as well as the high-speed water spike penetrating through the opening. The results revealed that there was a critical value of the bubble-wall distance, below which the bubble was directed away from the incomplete boundary, while the bubble may tear from the middle for larger distance. As the distance varied, we studied the volume of the water that rushed through the opening, the velocity at the tip of the water spike, and the center of the bubble as well as the migration of the bubble boundary. This work reveals that the high-speed water spike caused by the bubble may be a potential threat to the structures, specifically for cases with a small opening size and short bubble-boundary distance.