Vortex dynamics of a trapezoidal bluff body placed inside a circular pipe

The influence of Reynolds number and blockage ratio on the vortex dynamics of a trapezoidal bluff body placed inside a circular pipe is studied experimentally and numerically. Low aspect ratio, high blockage ratio, curved end conditions (junction of pipe and bluff body), axisymmetric upstream flow with shear and turbulence are some of the intrinsic features of this class of bluff body flows which have been scarcely addressed in the literature. A large range (200:200,000) of Reynolds number (Re_D) is covered in this study, encompassing all the three pipe flow regimes (laminar, transition and turbulent). Four different flow regimes are defined based on the distinct features of Strouhal number (St)–Re_D relation: steady, laminar irregular, transition and turbulent. The wake in the steady regime is stationary with no oscillations in the shear layer. The laminar regime is termed as irregular owing to irregular vortex shedding. The vortex shedding in this regime is observed to be symmetric. The emergence of separation bubble downstream of the bluff body on either side is another interesting feature of this regime, which is further observed to be symmetric. Two pairs of mean streamwise vortices are noticed in the near-wake regime, which are termed as reverse dipole-type wake topology. Beyond the irregular laminar regime, the Strouhal number falls gradually and vortex shedding becomes more periodic. This regime is named transition and occurs close to the Reynolds number at which transition to turbulence takes place in a fully developed pipe. The turbulent regime is characterised by a nearly constant Strouhal number. Typical Karman-type vortex shedding is noticed in this regime. The convection velocity, wake width formation length and irrecoverable pressure loss are quantified to highlight the influence of blockage ratio. These results will be useful to develop basic understanding of vortex dynamics of confined bluff body flow for several practical applications.     

Pulse chirping effect on controlling the transverse cavity oscillations in nonlinear bubble regime

The propagation of an intense laser pulse in an under-dense plasma induces a plasma wake that is suitable for the acceleration of electrons to relativistic energies. For an ultra-intense laser pulse which has a longitudinal size shorter than the plasma wavelength, λp, instead of a periodic plasma wave, a cavity free from cold plasma electrons, called a bubble, is formed behind the laser pulse. An intense charge separation electric field inside the moving bubble can capture the electrons at the base of the bubble and accelerate them with a narrow energy spread. In the nonlinear bubble regime, due to localized depletion at the front of the pulse during its propagation through the plasma, the phase shift between carrier waves and pulse envelope plays an important role in plasma response. The carrier–envelope phase(CEP) breaks down the symmetric transverse ponderomotive force of the laser pulse that makes the bubble structure unstable. Our studies using a series of two-dimensional(2D) particle-in-cell(PIC) simulations show that the frequency-chirped laser pulses are more effective in controlling the pulse depletion rate and consequently the effect of the CEP in the bubble regime. The results indicate that the utilization of a positively chirped laser pulse leads to an increase in rate of erosion of the leading edge of the pulse that rapidly results in the formation of a steep intensity gradient at the front of the pulse. A more unstable bubble structure, the self-injections in different positions, and high dark current are the results of using a positively chirped laser pulse. For a negatively chirped laser pulse, the pulse depletion process is compensated during the propagation of the pulse in plasma in such a way that results in a more stable bubble shape and therefore, a localized electron bunch is produced during the acceleration process. As a result, by the proper choice of chirping, one can tune the number of self-injected electrons, the size of accelerated bunch and its energy spectrum to the values required for practical applications.     

SiC单晶刻划过程的脆塑性转变特征研究

SiC单晶化学性能稳定、导热系数高、热膨胀系数小、耐磨性能好,广泛用于大功率器件产业.但由于其材料的硬度很大,加工非常困难.脆性材料塑性域加工为提高该类材料的表面质量,降低加工时间和成本提供了有效的途径.本文采用不同刀具角度和刀尖圆弧半径的单点金刚石刀具对4H-SiC单晶进行刻划实验,利用声发射、摩擦力传感器来监测刻划过程中声发射信号强度以及摩擦力的变化,并通过Leica DCM3D以及SEM观察划痕沟槽表面形貌、切屑状态,综合分析以获得4H-SiC单晶在不同角度、刀尖圆弧半径下塑脆转变的临界切削深度.结果表明,增大刀具角度有利于塑性域加工;在相同条件下,刀尖圆弧半径越大,临界切削深度越大.     

Low temperature and high pressure thermoelastic and crystallographic properties of SrZrO3 perovskite in the Pbnm phase

The thermoelastic and structural properties of SrZrO₃ perovskite in the Pnma (Pbnm) phase have been studied using neutron powder diffraction at 82 temperatures between 11 K and 406 K at ambient pressure, and at sixteen pressures between 0.07 and 6.7 GPa at ambient temperature. The bulk modulus, derived by fitting the equation of state to a second order Birch-Murnaghan equation-of-state, 157(5) GPa, is in excellent agreement with that deduced in a recent resonant ultrasound investigation. Experimental axial compressional moduli are in agreement with those calculated from the elastic stiffness coefficients derived by ab-initio calculation, although the experimental bulk modulus is significantly softer than that calculated. Following low temperature saturation for temperatures less than 40 K, the unit cell monotonically increases with a predicted high temperature limit in the volume expansivity of ∼2.65 × 10⁻⁵ K⁻¹. Axial linear thermal expansion coefficients are found to be in the order α_b < α_c < α_a for all temperatures greater than 20 K with the b axis indicating a weak, low temperature negative expansion coefficient at low temperatures. The thermoelastic properties of SrZrO₃ can be approximated by a two-term Debye model for the phonon density of states with Debye temperatures of 238(4) K and 713(6) K derived in a self-consistent manner by simultaneously fitting the isochoric heat capacity and the unit cell volume. Atomic displacement parameters have been fitted to a modified Debye model in which the zero-point term is an additional refinable variable and shows the cations and anions have well separated Debye temperatures, mirroring the need for two Debye-like distributions in the vibrational density of states. The temperature dependence of the crystal structure is presented in terms of the amplitudes of the seven symmetry-adapted basis vectors of the aristotype phase that are consistent with space group Pbnm, thus permitting a direct measure of the order parameter evolution in SrZrO₃. The temperature variation of the in-phase tilt, which is lost at the phase transition at 973 K, is consistent with tricritical behaviour, in agreement with published results based on high temperature crystallographic data.     

Investigation of the influence of oil film thickness on helical gear defect detection using Acoustic Emission

This paper reports an investigation into the use of Acoustic Emission (AE) for monitoring gear teeth defects under varying lubrication regimes in helical gears. The investigation used a back-to-back gearbox test-rig with oil-bath lubrication. Variation in oil film thickness was achieved by decreasing the gear metal temperature with nitrogen gas whilst the gears were in operation. Results demonstrate a clear relationship between AE activity, operating temperature and specific film thickness. In addition, results show that there are lubricating conditions that may prevent AE from identifying the presence of gear defects.     

Optical conductivity of cuprates from Yang–Rice–Zhang ansatz: Comparison with experiment

We report the results of a theoretical investigation on charge dynamics in weakly coupled CuO₂ planes of the cuprate Ca_2 − xNa_xCuO₂Cl₂ in the pseudogap regime by using the theory of Yang, Rice, and Zhang (YRZ) [1]. With a detailed numerical analysis at various impurity scattering rates (_γimp${\gamma }_{\mathit{imp}}$), we observe that YRZ model is not able to reproduce (in magnitude) the experimentally observed frequency evolution of optical conductivity at a fixed doping level. Further, to analyze the doping evolution, we have done a detailed comparison of calculated YRZ conductivity with the experimental one using Two-Component Drude–Lorentz model. We find that YRZ model is capable of reproducing (qualitatively) the experimentally observed doping evolution of Drude processes (low energy scale) and processes at the pseudogap (intermediate energy scale). We also discuss physical reasons of the discrepancy seen in magnitudes.     

掺杂对CH样品Rayleigh-Taylor不稳定性增长的影响

在神光II激光装置上进行了辐射驱动不同掺杂样品的单模Rayleigh-Taylor(RT)不稳定性实验.结果显示:与纯碳氢(CH)样品相比,掺Br的CH样品的扰动更早、更快地进入非线性区,产生二次谐波,并且掺Br比例越高,CH样品扰动进入非线性区的时间越早,相同时刻扰动的二次谐波的幅度越高.这是因为密度梯度效应抑制了二次谐波的产生,掺Br比例越高,密度梯度标长越小;同时密度梯度效应还抑制三次谐波对基模增长的负反馈,造成基模具有更大的线性增长,导致线性饱和幅值大于经典值0.1λ.     

Quantum transport through anisotropic molecular magnets: Hubbard Green function approach

We extend the Green function approach to quantum transport through an anisotropic molecular magnet system with the help of Hubbard operators. Based on the single molecular magnet model, we reformulate the large spin and the total Hamiltonian in the language of Hubbard operators and obtain analytical expressions of the retarded Green function in sequential tunneling and Kondo regimes. In addition to this, we show the connection of our method to the master equation method in sequential regime and discuss a simple isotropic case in Kondo regime, in which we find a three-peak Kondo structure, a feature characterizing the isotropic exchange interaction between the localized electron and large spin.     

New closed-form Green function and integral formula for a thermoelastic quadrant

In this study a new Green’s function and a new Green-type integral formula for a boundary value problem (BVP) in thermoelastostatics for a quadrant are derived in closed form. On the boundary semi-straight-lines twice mixed homogeneous mechanical boundary conditions (one boundary semi-straight-line is free of loadings and normal displacements and tangential stresses are prescribed on the other one) are prescribed. The thermoelastic displacements are subject by a heat source applied in the inner points of the quadrant and by mixed non-homogeneous boundary heat conditions (on one boundary semi-straight-line the temperature is prescribed and the heat flux is given on the other one). When thermoelastic Green’s function is derived the thermoelastic displacements are generated by an inner unit point heat source, described by δ Dirac’s function. All results are obtained in elementary functions that are formulated in a special theorem. A closed-form solution for a particular BVP of thermoelastostatics for a quadrant also is included. Using the proposed approach it is possible to extend the obtained for quadrant results to any other canonical Cartesian domain.     

Titanium micromachining by femtosecond laser

The ultimate goal of this research was to characterize the ablation depth with respect to pulse energy, translation speed, and consecutive passes in order to obtain the parameters to have smooth microchannel surfaces. A logarithmic dependence of the channel depth on the laser pulse energy was observed with two different distinct ablation regimes. Although the same fluence values were used with two different lens sizes, the slopes of these ablation regimes were quite different. 100 mm lens has a small optical penetration length with steeper ablation slope in the first regime, whereas the 15 mm lens has the opposite. In the second part of the ablation regime, the slope was lower for 100 mm lens as compared to 15 mm lens. Furthermore, spike formation has been seen in 100 mm lens study at 0.308, 0.370, 0.431, and 0.493 J/cm² fluence values yet no spike formations have been seen in 15 mm lens study.