顶空气相色谱-质谱联用结合同位素峰形校正检索技术鉴别芝麻油风味成分

采用顶空气相色谱-质谱联用(GC-MS)仪结合同位素峰形校正检索技术鉴别了市售芝麻油风味成分中的71种化合物,占总检出化合物的90.2%。检出化合物可分为吡嗪、吡咯、吡啶、噻唑、噻吩、吲哚、唑、呋喃、醛类和酚类等,其中醛、酚、吡嗪和呋喃类化合物的含量较高,分别占风味成分含量的37.4%,20.1%,10.0%和6.7%。同位素峰形校正检索技术在低分辨率质谱上可对化合物的相对分子质量实现精确测量,从而为低分辨率四极杆质谱确定化合物的元素组成和解析化合物结构提供了重要依据,同时也为芝麻油的成分分析提供了新的技术手段。     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

热脱附-气相色谱-质谱法应用于工业源废气中挥发性有机物的目标和非目标筛查

建立了固相吸附热脱附-气相色谱-质谱(TD-GC-MS)综合筛查工业源废气中挥发性有机物(VOCs)的方法。对两种型号的固相吸附管进行了比较,最终选择使用Tenax SS TD Tubes吸附管。气体样品以恒定流速通过吸附管,富集分析物,经热脱附后,用GC-MS进行检测,目标化合物以内标法定量,非目标化合物的含量以甲苯的响应系数计算。方法检出限为1.06~5.44 ng,以采样体积300 mL计算,目标化合物的检出限为0.004~0.018 mg/m~3。吸附管平均加标回收率为78.4%~89.4%,相对标准偏差为3.9%~14.4%(n=7)。应用该方法对大连市某垃圾焚烧发电厂排放的废气进行VOCs目标及非目标化合物综合筛查,共检出29种VOCs,其中仅5种VOCs为预先设定的目标化合物,另外24种为非目标化合物,5种目标化合物含量仅占所有检出物总量的26.7%。证明了工业源废气VOCs分析中非目标化合物筛查的重要性,该研究思路对完整测定工业源挥发性有机污染物分布具有一定的借鉴意义。     

Structural Elucidation of Trace Amounts of Volatile Compounds Using the Crystalline Sponge Method

Volatile organic compounds are widely present as scents and odors in our daily lives and are readily found in a variety of natural extracts. Because these compounds are highly volatile and usually available only in minute quantities, little attention has been paid to X‐ray diffraction as a technique for their structure determination. Here, we show that the structures of volatile organic compounds are easily elucidated using minute quantities of the compounds and the crystalline sponge method. The compound vapors can be directly absorbed into the sponge crystals, or alternatively, preparative gas chromatography can be used to separate the desired compound from a natural mixture.     

Strong explosion near a parallelepipedic structure

The purpose of this paper is to report the blast loading characteristics resulting from the detonation of a stoichiometric propane–oxygen mixture, and to validate the approach which relies on simulating TNT explosions at large scale by small-scale experiments of gaseous explosions. Several dimensionless correlations are obtained from experimental data. These relationships allow determination of the parameters of a blast wave interacting with a structure as a function of the positions of the explosive charge and the structure. Simulations carried out with the Autodyn code show good correlation with experimental results. The Hopkinson law is suggested to predict the blast wave’s parameters at large scale on the basis of small-scale experiments and simulations. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31–August 5, 2005.     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

Gas sensing performance of polyaniline/ZnO organic-inorganic hybrids for detecting VOCs at low temperature

Polyaniline (PANI) was prepared by the chemical oxidative polymerization of aniline, and ZnO, with the mean particle size of 28 nm, was synthesized by a non-aqueous solvent method. The organic-inorganic PANI/ZnO hybrids with different mass fractions of PANI were obtained by mechanically mixing the prepared PANI and ZnO. The gas sensing properties of PANI/ZnO hybrids to different volatile organic compounds (VOCs) including methanol, ethanol and acetone were investigated at a low operating temperature of 90°C. Compared with the pure PANI and ZnO, the PANI/ZnO hybrids presented much higher response to VOCs. Meanwhile, the PANI/ZnO hybrid exhibited a good reversibility and a short response-recovery time, implying its potential application for gas sensors. The sensing mechanism was suggested to be related to the existence of p-n heterojunctions in the PANI/ZnO hybrids.     

Catalytic combustion of ethyl acetate over CeMnO_x and CeMnZrO_x compounds synthesized by coprecipitation method

Ce0.6Mn0.4O2 catalysts with different sources of manganese and Ce0.6-xZrxMn0.4O2 mixed oxide catalysts were prepared by coprecipitation method and were characterized by N2 adsorption-desorption,TPR,XRD,and XPS techniques.The activities of the prepared catalysts for ethyl acetate combustion,and the effects of calcination temperature and space velocity on catalytic activity were investigated.The results showed that partial replacement of Mn(NO3)2 with KMnO4 as sources of manganese could improve activities of catalysts.Ce0.45Zr0.15Mn0.4O2 catalyst exhibited the best catalytic activity and high thermal stability,e.g.,T90 could be still below 210℃ even if space velocity was up to 20000h-1.     

硅胶的表面硅烷化处理及其吸附性能研究

为研究改性硅胶对挥发性有机废气的吸附性能,分别采用十六烷基三甲氧基硅烷、辛基三乙氧基硅烷、苯基三甲氧基硅烷、一甲基三乙氧基硅烷对硅胶进行气相改性处理,试验研究了不同改性剂、改性时间对硅胶饱和吸附率的影响,考察了改性硅胶对甲苯、水二组分体系的吸附选择性.结果表明,硅胶对甲苯的吸附主要为物理吸附,长链的硅烷改性剂在60℃、...