CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

Investigations of Solid State Dynamics at the NRSSR Beamline at PETRA II. An Overview

The present status of the new nuclear resonance beamline PETRA 1 at HASYLAB, DESY, Hamburg is described. Besides an overview of the experimental setup some examples of recent experiments are given. Those cover the main applications, i.e., inelastic scattering from iron alloys and quasielastic scattering from glass-forming liquids. This revised version was published online in August 2006 with corrections to the Cover Date.     

在BEPC上建造γ束线站的分析

考虑电子的反冲并利用康普顿散射,研究了激光同步辐射光源(LSS)辐射的光子波长、光子能量。结果表明,对于不同的γ,LSS辐射的光子波长和能量有不同的近似公式。当γ<<λ1/4λe时,LSS辐射的光子波长λ2≈λ1/4γ2,能量(εc2≈4γ2εc1;当γ>>λ1/4λe时,LSS辐射的光子波长λ2≈λe/γ,能量cε2≈m0γc2;结果表明,LSS辐射的条件是种子激光的波长λ1大于电子的物质波波长λm;LSS辐射的极值波长是λ2m ax=h/m0γv,极值能量是cε2m ax=βeε;本文后半部分提出了利用北京正负电子对撞机的强流高亮度电子束与激光的康普顿背散射产生单色γ射线的建议。     

填充式方钴矿化合物CeOs4Sb12近藤相互作用的非弹性中子散射研究

CeOs₄Sb₁₂晶体中由于导电电子与Ce³⁺ 4f¹电子之间存在c-f杂化作用导致费米面附近存在能量间隙.这种c-f近藤相互作用和能量间隙是理解CeOs₄Sb₁₂物理性质，如近藤绝缘体行为、Ce³⁺磁矩在低温下猝灭以及重费米性等电、磁性质的关键.当用LAM-D中子谱仪对粉末CeOs₄Sb₁₂进行测量时，可以得到不同温度下CeOs₄Sb₁₂的非弹性中子散射谱.结果表明CeOs₄Sb₁₂中存在近藤相互作用，其作用强度为3.1 meV，证实了CeOs₄Sb₁₂为近藤绝缘体.中子测量得出CeOs₄Sb₁₂德拜温度为317 K. 关键词： 非弹性中子散射 填充式方钴矿 近藤绝缘体     

Electrical behavior of the Au/MoS2 interface studied by light emission induced by scanning tunneling microscopy

Light emitted in the tunneling junction of a scanning tunneling microscope has been used to establish the electrical characteristics of nanojunctions made of Au islands deposited on flat MoS₂ surfaces. It is shown that these characteristics are those of rectifying contacts when the gold islands are isolated and that they evolve toward those of ohmic contacts when the island density increases. It is observed that the rectifying behavior also evolves over time as on infinite metal/semiconductor contacts. Using the STM tip, single gold islands can be manipulated on the MoS₂ surface so that their electrical behavior can be changed depending on their position with regard to the other islands.     

Three-dimensional radiative transfer in an anisotropically scattering, semi-infinite medium: generalized reflection function

Three-dimensional radiative transfer in an anisotropic scattering medium exposed to spatially varying, collimated radiation is studied. The generalized reflection function for a semi-infinite medium with a very general scattering phase function is the focus of this investigation. An integral transform is used to reduce the three-dimensional transport equation to a one-dimensional form, and a modified Ambarzumian's method is applied to formulate a nonlinear integral equation for the generalized reflection function. The integration is over both the polar and azimuthal angles; hence, the integral equation is said to be in the double-integral form. The double-integral, reflection function formulation can handle a variety of anisotropic phase functions and does not require an expansion of the phase function in a Legendre polynomial series. Complicated kernel transformations of previous single-integral studies are eliminated. Single and double scattering approximations are developed. Numerical results are presented for a Rayleigh phase function to illustrate the computational characteristics of the method and are compared to results obtained with the single-integral method. Agreement between the two approaches is excellent; however, as the transform variable increases beyond five the number of quadrature points required for the double-integral method to produce accurate solutions significantly increases. A new interpolation scheme produces accurate results when the transform variable is large.     

非线性薛定谔模型边界场算子的形式因子

讨论了可积开边界条件下的非线性薛定谔模型，给出了其贝特本征态的内积和模长.在此基础上得到了边界场算子的形式因子. 这些结果均被表达成由谱参量的函数所构成的行列式. 关键词： 可积模型 形式因子 反散射     

球形拓扑中复杂形状生物膜泡的获得及其稳定性分析

通过在Surface Evolver软件中建立一些与目标形状相似的初始形状，经长时间演化后，得到了实验上已经观察到的具有D_2h和D_3h对称性的海星形生物膜泡.通过跟踪不同形状膜泡的Hessian矩阵的本征值，确定了双凹圆盘与海星形及哑铃形之间的相变是不连续的，其间所经历的三角扁盘及椭圆扁盘形中间相在SC模型中通常是不稳定的. 关键词： SC模型 生物膜泡 Surface Evolver     

Modification of the surface state of rough substrates by two different varnishes and influence on the reflected light

Modification of the visual appearance when a rough surface is covered by a varnish is mostly attributed to the levelling of the substrate surface, which depends on the molecular weight of the varnish. The topography of varnished surfaces, however, has never been measured directly. Surfaces of varnishes applied over glass substrates of varying roughness were studied, therefore, using mechanical profilometry. Two different varnishes made with a low and a high molecular weight resin were studied. Both varnishes lower the r.m.s. roughness of the substrates and filter the high spatial frequencies. These results are amplified for the varnish containing the low molecular weight resin. The light reflected by the varnished samples is modelled from these topographical data. Its angular distribution, calculated from the probability density of slopes is presented, taking into account separately the air/varnish and the varnish/substrate interfaces. These analyses are presented in a back-scattering configuration. They show that varnishing significantly reduces the angular width of the reflected light and that this effect is magnified for the low molecular weight resin. Modelling furthermore shows that the influence of the roughness of the varnish/substrate interface is negligible in the total reflected light.