Regimes of vortex shedding from an in-line oscillating circular cylinder in the uniform flow

A finite volume method for the time dependent viscous incompressible flow around an in-line oscillating circular cylinder at Reynolds number of 200, 855 is presented in this paper. The Navier-Stokes equations in a finite volume form are solved with a moving grid system, based on a time dependent coordinate transformation. To investigate the vortex-shedding characteristics behind the circular cylinder and the effects of Reynolds number and other non-dimensional parameters such as reduced amplitude and reduced frequency， several numerical schemes have been tested with different amplitude and frequency close to Sto and a harmonic at each Reynolds number. Present numerical results indicate several types of vortex shedding mode which is known mainly depending on the reduced frequency and also the reduced amplitude, which is called synchronization or lock-on.     

有初内力的板的内共振

本文利用非线性时空有限方法和样条有限元技术对具有初内力的板的非线性频响特性进行了分析，计算了在不同初始内力下方板的大振幅自由振动、有阻尼强迫振动和矩形板的内共振。     

A new phenomenon of acoustic streaming

This paper describes a new phenomenon of acoustic streaming which takes place when a Helmholtz resonator is excited by an inside sound source with resonant frequency, and takes the form of a strong turbulent jet. The flow visualizations, hot wire and LDV measurements are combined to investigate the process of acoustic streaming. It is found that this kind of acoustic streaming results from the contribution of Reynolds stress.     

Experimental investigation of a buckled beam under high-frequency excitation

In this paper, we investigate theoretically and experimentally dynamics of a buckled beam under high-frequency excitation. It is theoretically predicted from linear analysis that the high-frequency excitation shifts the pitchfork bifurcation point and increases the buckling force. The shifting amount increases as the excitation amplitude or frequency increases. Namely, under the compressive force exceeding the buckling one, high-frequency excitation can stabilize the beam to the straight position. Some experiments are performed to investigate effects of the high-frequency excitation on the buckled beam. The dependency of the buckling force on the amounts of excitation amplitude and frequency is compared with theoretical results. The transient state is observed in which the beam is recovered from the buckled position to the straight position due to the excitation. Furthermore, the bifurcation diagrams are measured in the cases with and without high-frequency excitation. It is experimentally clarified that the high-frequency excitation changes the nonlinear property of the bifurcation from supercritical pitchfork bifurcation to subcritical pitchfork bifurcation and then the stable steady state of the beam exhibits hysteresis as the compressive force is reversed. This work was partially supported by the Japanese Ministry of Education, Culture, Sports, Science, and Technology, under Grants-in-Aid for Scientific Research 16560377.     

基于光纤的光学频率传递研究

随着光钟研究的发展, 光钟的稳定度和不确定度均达到10^-18量级. 通过光纤可以实现光钟频率信号的高精度传输, 有望用于未来“秒”定义的复现. 演示了百公里级实验室光纤上的光学频率传递. 对于在实验室70 km光纤盘上实现的光频传递, 光纤相位噪声抑制在1-250 Hz傅里叶频率范围内均接近于光纤延时极限, 对应传输稳定度(Allan偏差)为秒级稳定度1.2×10^-15, 10000 s稳定度为1.4×10^-18. 实验室100 km光纤的光频传递秒级稳定度也达到了5×10^-15. 提出了光纤噪声用户端补偿的方案, 可以简化星形传递网络中心站的复杂度. 在25 km光纤上演示了该传递方案, 实现的传输稳定度接近传统前置补偿传递方案.     

补偿转向盘振动力矩的控制策略研究

在Matlab/Simulink中建立了电动助力转向系统动力学模型,根据路感信息与不平路面引起的振动干扰在频率上的区别,经过高通滤波检测出路面不平整产生的转向系统干扰力矩,通过助力电机提供相反大小的力矩对其进行补偿。针对路感信息与路面振动干扰在频率上区分界限的不固定性,设计了一种在线可调节滤波器截止频率的控制方法,避免对车辆路感信息正常传递的影响。仿真结果表明,所设计的补偿控制策略能够有效衰减不平路面干扰力矩到方向盘的传递。     

基于PLC模糊自适应PID门座式起重机变频调速系统的设计与实现

为了进一步提高门座式起重机控制系统的平稳性和可靠性,在研究传统的起重机控制系统的基础上,设计了基于PLC模糊自适应PID的起重机变频调速系统,利用先进的模糊自适应PID算法与PLC控制技术相结合实现智能变频控制。系统直接由PLC实现函数运算取代常规的查表方式,改善调速性能,实现了变频调速系统的快速控制;同时,通过PLC对起重机变频器进行无触点控制,有效提高了的准确可靠性。仿真结果表明：加入模糊自适应PID控制的起重机变频调速系统比传统系统响应速度快,超调量低于3%,更加平稳可靠;同时降低了起重机功耗,节能近20%,并有效延长了电动机的使用寿命。     

Casimir-Polder力对左手材料板附近的原子的动力学作用

本文研究了初始处于激发态的两能级原子在左手材料附近运动时Casimir-Polder力对原子动力学的影响. 左手材料有两个的作用: 一是在距离界面波长区域内提供了较强的Casimir-Polder共振力, 二是在这一范围原子的自发辐射受到抑制, 延长了作用时间. 这两种效应使得依靠原子自发辐射这一过程中的Casimir-Polder力能对原子的运动学产生影响, 并将一定初速度的原子排斥远离界面. 由于原子偶极矩的取向会影响Casimir-Polder力的性质, 因此对于某些初始条件(初速度和初始位置), 不同偶极矩取向的原子有不同的运动学结果, 会被吸引到界面或反射出去, 从而对具有不同偶极矩方向的原子进行筛选. 当然由于Casimir-Polder力很小, 能够反射的初速度也很小, 但是已经可以反抗极低温的热涨落, 我们的理论预估值约为15 μupK. 如果和其他约束手段同时作用, 便能对原子的动力学产生更为有利的控制.     

发光液晶材料的合成及发光特性研究

具有聚集诱导发光增强效应的发光液晶材料,能有效地解决一般发光材料聚集时荧光猝灭和液晶自组装之间的矛盾,在液晶显示等领域有极大的应用价值。本文报道了一种自发光液晶材料(2Z,2'Z)-2,2'-(1,4-亚苯基)二(3-(4-己氧基)苯基)丙烯腈(PHPA)。研究了PHPA的聚集态发光性质、溶剂化效应、热力学性质及发光各向异性。结果表明,PHPA同时具有聚集态诱导发光增强效应和液晶性,其有序取向的薄膜发出的光具有各向异性。该发光液晶材料应用于液晶显示将能简化器件结构、增加亮度、对比度和能效。     

InGaN/GaN多量子阱结构发光二极管发光机理转变的低频电流噪声表征

本文对InGaN/GaN多量子阱结构发光二极管开启后的电流噪声进行了测试, 结合低频电流噪声的特点和载流子之间的复合机理, 研究了低频电流噪声功率谱密度与发光二极管发光转变机理之间的关系. 结论表明, 当电流从0.1 mA到10 mA逐渐增大的过程中, InGaN/GaN发光二极管的电流噪声行为从产生-复合噪声逐渐接近于低频1/f噪声, 载流子的复合机理从非辐射复合过渡为电子与空穴之间载流子数的辐射复合, 并具有标准1/f噪声的趋势, 此时多量子阱中的电子和空穴之间的复合趋向于稳定. 本文的结论提供了一种表征InGaN/GaN多量子阱发光二极管发光机理转变的有效方法, 为进一步研究发光二极管中载流子的复合机理、优化和设计发光二极管、提高其发光量子效率提供理论依据.