溴取代紫外光度法同时测定痕量磺胺嘧啶和磺胺二甲嘧啶

提出了同时测定痕量磺胺嘧啶(SD)和磺胺二甲嘧啶(SM2)的溴取代紫外光度分析法, 实验结果表明: 在6×10-5 mol/L Br2, 2.5×10-3 mol/L KI溶液和体积分数40%乙醇溶液中, 测定SD和SM2的线性范围分别为: 0～2.25 mg/L, 和0～1.125 mg/L, 摩尔吸光系数(L·moL-1·cm-1)分别为: 在水中9.66×104和8.16×104, 在乙醇水溶液中1.25×105, 1.99×105. 用此法对猪肉中SD和SM2进行测定, 猪肉中SD和SM2的质量分数分别为7.53、7.35 mg/kg, 回收率在91.4%～104.4%, SD和SM2的相对标准偏差分别为0.5%、1.5%.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Study on the nature of interaction of BrCl with HF,H2O,and NH3

By counterpoise‐corrected optimization method, the interactions of BrCl with the first‐row hydrides (HF, H₂O, NH₃) have been investigated at the MP2/6–311++G(3d,3p) level. To understand that the X? Br‐type (X = F, O, N) structure is more stable than the corresponding hydrogen‐bonded structure in these complexes, the electronic properties were also investigated. Symmetry‐adapted perturbation theory (SAPT) analysis has been carried out to understand the nature of the weak hydrogen bond and X? Br‐type interactions. On the other hand, for the weak hydrogen‐bonded complexes and the X? Br‐type complexes charges transfer is well correlated with the total induction energies. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

原子吸收光谱测定Sm-Eu-Gd富集物中Sm、Eu、Gd

本文制定了N_2O-C_2H_2焰原子吸收光谱直接测定Sm-Eu-Gd富集物中Sm、Eu和Gd的分析方法。采用氧化镧溶液作为缓冲剂消除干扰提高灵敏度。此法不需要复杂的分离过程。方法简便、快速、成本低、适合工厂采用。     

膜富集分光光度法测定微量锌

以５－Ｂｒ－ＰＡＤＡＰ为显色剂，用ＷＸ型混合纤维素滤膜（孔径０．６５μｍ，φ２５ｍｍ）富集微量锌，用乙醇溶解富集物（Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ）分光光度法测定锌，Ｚｎ（Ⅱ）－５－Ｂｒ－ＰＡＤＡＰ在乙醇溶液中最大吸收波长为５５５ｎｍ，表观摩尔吸光系数１．０９×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锌量在０．１～５．０μｇ／５ｍＬ，范围内符合比耳定律，本法灵敏度高，操作简便，应用于食品，水样中锌     

稀土与含硫有机配体配合物的研究 Ⅳ.轻稀土元素与3-苯基-5-(呋喃-2)吡唑啉二硫代甲酸固体配合物的合成及性质

吡唑啉类化合物具有杀菌特性和植物生长调节作用,3-苯基-5-(呋喃-2)吡唑啉二硫代甲酸盐能与许多过渡金属离子形成稳定的配合物。而与稀土的配合物尚未报道。为考察稀土与含硫有机配体形成配合物的条件及该配合物的性质,我们在非水体系和保护气氛     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.     

Kinetic study of the reaction of CH3O with Br and Br2

The title reactions have been studied at room temperature by applying the discharge flow method coupled with laser induced fluorescence detection of methoxy radicals and resonance fluorescence detection of bromine atoms. The following rate constants were determined: CH₃O + Br Õ products (1) k ₁ (298 K) = (3.4 ± 0.4 (1)) × 10¹³ cm³ mol^-1 s^-1, CH₃O + Br₂ Õ products (2) k ₂ (298 K) £ 5 × 10⁸ cm³ mol^-1 s^-1.     

Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.     

AES and ELS study of titanium oxidation in high vacuum

In the present work, results of the interaction of O₂ with polycrystalline titanium using AES, and ELS techniques, are presented. Changes in the shapes of Ti(LMV) and Ti(LMM) transitions and in the Ti(LM)O(V)/Ti(LMV) and Ti(LMV) Ti(LMM) amplitude ratios as well as a shift of the 34 eV loss peak [Ti(3p level], are studied as function of the oxygen exposure.At O₂ pressures equal or less than 10^–6 Pa and exposure up to 2000 L(O₂) (weak oxidation), the Ti(LM)O(V)/Ti(LMV) and Ti(LMV)/Ti(LMM) ratios show three clearly distinct regions: (i) up to 20L there is a chemisorbed phase with the Ti(LMV)/Ti(LMM) ratio remaining constant and a fast linear increase in the Ti(LM)O(V)/Ti(LMM) ratio. (ii) At exposures higher than 20L the oxidation begins being characterized by a linear variation of the Ti(LM)O(V)/Ti(LMV) and Ti(LMV)/Ti(LMV) ratios, with positive and negative slopes, respectively. (iii) At 125L there is a change in both slopes but no stable value is achieved, despite the O(KLL)/Ti(LMM) ratio remains constant. Hence, it can be concluded that TiO is the final oxide obtained after that treatment, from features like the shape of the transitions and a maximum shift of 3eV of the Ti(3p) level, complemented with ESD experiments.On the other hand, experiments at pressures higher than 10^–4Pa with or without the surfaces at 900K (strong oxidation) indicate that the most likely final oxide is TiO₂.Work presented to the IXIVC-VICSS. Madrid (1983)