Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.     

Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.     

三维有序大孔杂化材料SiW11O39^8——SiO2和γ—SiW10O36^8——SiO2的制备与表征

通过溶胶 -凝胶和聚苯乙烯模板等方法制备了含缺位 Keggin阴离子 Si W1 1 O8- 3 9和 γ-Si W1 0 O8- 3 6的三维有序大孔杂化氧化硅复合材料 ,并通过紫外漫反射光谱 ( UV/ DRS)、傅里叶变换红外光谱 ( FTIR)、固体核磁共振波谱 ( MAS NMR)等手段对其结构进行了表征 .结果表明 ,杂化材料中的 Keggin阴离子仍保留其基本骨架结构 ,但其与氧化硅基体之间存在化学作用 .杂化材料的孔道结构用扫描和透射电子显微镜 ( SEM和TEM)进行表征 ,其平均孔径为 ( 335± 5 0 ) nm.对杂化材料孔壁的微孔性通过氮气吸附进行了测定 .此类材料对水溶液中羟基丁二酸的降解反应具有活性 ,光催化过程中未发现 Keggin阴离子自载体中脱落的现象 .     

Hydroxyapatite gels and nanocrystals prepared through a sol-gel process

We have investigated the effect of the Ca/P molar ratio on the structural and morphological properties of hydroxyapatite (HA) gels and nanocrystals. The sol-gel process was carried out in aqueous, and alternatively in alcoholic medium (50% water-50% ethanol), at 37°C. Gel samples were obtained by drying the sols at 37°C or at 80°C, whereas powder samples were obtained by filtering the sols. Heat treatment at temperatures as low as 300°C is enough to obtain pure HA from the gels with a Ca/P molar ratio of 1.00 and 1.67. At variance, heat treatment of the gels with a Ca/P of 2.55 always produces secondary phases. The degree of crystallinity of HA increases with the Ca/P molar ratio of the sols, and it is slightly affected by the presence of ethanol in the precipitation medium. Filtering of the sols provides powders constituted of nanocrystalline HA that exhibit degree of crystallinity, crystal morphology and thermal stability closely related to the sols composition.     

Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.     

Mechanochemical Preparation of Water-Soluble Forms of Triterpene Acids

A waste-free technology for mechanochemical processing of fir needles into a biologically active preparation that regulates plant growth was developed. A preparation exhibiting cytokinin activity due to the presence in it of water-soluble forms of triterpene acids can be prepared using the proposed method. The effectiveness of the proposed method was confirmed by instrumental methods and biological tests.     

气相色谱质谱联用仪与微机的数据传输和处理

报道了一种用于气相色谱质谱联用仪和微机之间实现数据传输和处理的方法。方法可更有效地利用质谱仪采集的数据，解决了工作站处理数据的局限性。经数据格式转换，原始数据可以在微机上实现色谱峰再现，从而为色谱条件的优化和定量数据处理创造了条件。     

微机控制离子色谱仪自动操作与数据处理系统

用转换器和ＩＢＭＰＣ／ＸＴ微机与Ｄｉｏｎｅｘ２０２０ｉ型离子色谱仪连接组成自动控制与数据处理系统，转换器由８０３１及８２５５等芯片组成，其功能是采集数据和转送数据，软件由汇编及Ｃ语言编制。这套新系统增加了注入／记录同步，分级梯度淋洗，自动连续进样等功能以及很强的数据处理能力。     

New process to control hydrolysis step during sol-gel preparation of sulfated zirconia catalysts

Sulfated zirconia catalysts were prepared by sol-gel process using a new method allowing the control of the hydrolysis step of zirconium alkoxides. Prepared samples were characterized by N₂ adsorption (desorption) at 77 K, XRD, chemical analysis of total sulfur and XPS. Catalytic properties have been evaluated in n-butane and n-hexane isomerization reactions. Obtained results show that time necessary for gelation is significant and depends considerably on the nature of the zirconium precursor. Concerning the properties of the solids obtained by this method, it has been noted that the use of the zirconium propoxide led to a better retention of the sulfate species, which improves activity during isomerization reactions. It has been found also that an initial S/Zr molar ratio equal to 0.5 allowed to obtain an optimal sulfur content and a high specific surface area.