Investigations on Pd:SnO2/porous silicon structures for sensing LPG and NO2 gas

P-type porous silicon (PS) structure has been prepared by anodic electrochemical etching process under optimized conditions. Photoluminescence studies of the PS structure show emission at longer wavelengths (red) for the excitation at 365 nm. Scanning electron microscope investigations of the PS surface confirm the formation of uniform porous structure, and the pore diameter have been estimated as 25 μm. Pd:SnO₂/PS/p-Si heterojunction with top gold ohmic contact developed by conventional methods has been used as the sensor device. Sensing properties of the device towards liquefied petroleum gas (LPG) and NO₂ gas have been investigated in an indigenously developed sensor test rig. The response and recovery characteristics of the sensor device at different operating temperatures show short response time for LPG. From the studies, maximum sensitivity and optimum operating temperature of the device towards LPG and NO₂ gas sensing has been estimated as 69% at 180 °C and 52% at 220 °C, respectively. The developed sensor device shows a short response time of 25 and 57 s for sensing LPG and NO₂ gases, respectively. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Spinning cone water film power meter for high-power CO2 lasers

A laser power meter based on water as an absorbing medium has been developed to measure multi-kilowatt CO₂ laser power with high sensitivity and accuracy. Water absorbs CO₂ laser radiation readily within a very thin layer. Though water has large thermal capacity, due to short absorption length, it could vapourize at high laser powers. In order to circumvent this problem, this power meter has a centre cone and a rapidly spinning water film as the calorimetric medium. The unique feature in this development is the centre cone, which diverges the beam and reduces the power density thus reduces the possibility of vapourization. This minimizes the error in measurements. Due to the rapidly moving fluid film, it exhibits fast response at low as well as high power levels.     

Response time and vendor–assembler relationship in a supply chain

Relationships between an assembler and a vendor in a supply chain are investigated in two-period models when the assembler wants to reduce response time by incentive systems. The assembler may offer myopic or farsighted incentive contracts to the vendor, under short-term or long-term relationships. Incentive schemes, effort levels, and expected payoffs under different perspectives and relationships are examined. We find that a farsighted assembler provides the vendor with a higher incentive than a myopic assembler in the first period. A long (short)-term relationship is preferred if the value of farsightedness under a long-term relationship is greater (less) than the switching option value under a short-term relationship. We propose several sufficient conditions regarding which perspectives and relationships are preferred.     

Dielectric and electrooptical properties of hockey-stick-shaped liquid crystal with a negative dielectric anisotropy

We investigated dielectric properties of a hockey-stick-shaped liquid crystal (HLC). Two dielectric relaxation modes were observed at 0.91 kHz and 4.51 MHz. The low frequency relaxation modes in isotropic, smectic, and nematic phases are related to the motion of ions, collective tilt fluctuation, and rotation around the long molecular axis, respectively. Meanwhile, the high frequency relaxation modes in nematic and smectic phases was due to the rotation around the short axis of the molecules and hindered by the resistance of the ITO layers. We also examined the electrooptical response of the 5.0 wt% HLC-doped commercial nematic liquid crystal (LC) mixtures. The birefringence of the LC mixture was slightly increased, while the falling time and the rotational viscosity was decreased in the nematic phase.     

Research for improvement on the extract efficiency of lignans in traditional Chinese medicines by hybrid ionic liquids: As a case of Suhuang antitussive capsule

Recently, efficient extraction of natural products from traditional Chinese medicines (TCMs) by green solvents is deemed an essential area of green technology and attracts extensive attentions. In this work, a green protocol for simultaneous ultrasonic-extraction of the native compounds with different polarities of TCMs by using a hybrid ionic liquids (HILs)-water system was reported for the first time. As a case study, three superior ILs (1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), and 1-allyl-3-methylimidazolium chloride ([AMIM]Cl)) were chosen as the compositions of the HILs system, and the TCMs Suhuang antitussive capsule (SH) containing different-polarity lignans was selected. Primarily, an ultra-performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry (UPLC-QqQ-MS/MS) method in the multiple reaction monitoring (MRM) mode was established for qualitative and quantitative analysis of 18 lignans. After majorization by uniform design experiment, the HILs prepared with [AMIM]Cl, [EMIM][BF4], and [EMIM][OAc] at a volume ratio of 1:5:5 could simultaneously extract multi-polarity lignans compared to single IL. Subsequently, the conditions of ultrasonic extraction employing with HILs and traditional organic solvent were optimized by the response surface methodology, respectively. The results indicated that the extract efficiency of the HILs system for target compounds was significantly improved compared with the traditional organic solvent-extraction, i.e. the content of total lignans in ethanol system was up to 47 mg/g, while that in the HILs system was up to 69 mg/g, with an increasing of 47%. Additionally, ¹H-NMR and ¹³C-NMR spectra were used to characterize the hydrogen-bond interactions in the HILs-lignan mixtures. Extraction with the HILs in TCMs is a new application schema of ILs, which not only avoids the use of volatile toxic organic solvents, but also shows the potential to be comprehensively applied for the extraction of bioactive compounds from TCMs.     

Effect of Polyethylene glycol methyl ether blend Humic acid on poly (vinylidene fluoride-co-hexafluropropylene) PVDF-HFP membranes: pH responsiveness and antifouling behavior with optimization approach

Flat sheet asymmetric membranes were fabricated with homogeneous solution of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) using N-methyl-2-pyrrolidone (NMP) as solvent via phase inversion method. PEGME (Poly ethylene glycol methyl ether) (M_n 5000) blend Humic Acid (HA), of different mole ratio was used as additive. Characterization of the membranes was done by Field emission scanning electron microscope (FESEM), Fourier Transform Infrared (FTIR) spectroscopy, Atomic force microscopy (AFM) and Differential scanning calorimetry (DSC) studies. Liquid-liquid displacement porosimetry (LLDP) study evaluated the morphological parameters, average pore size and pore size distribution. Bovine serum albumin (BSA) (M_W - 68,000 Da) was used to study the antifouling effect and pore blocking mechanism of the membranes. The pure water flux (PWF), solute rejection and flux recovery ratio drastically increases for the PEGME blended HA membranes whereas the water contact angle decreases significantly. The pH responsiveness character of the prepared membranes altered the hydraulic permeability and rejection % at different pH. Finally, optimization of the variables contributing towards the PWF and BSA rejection of the desired membrane was performed using Design expert software 9.0 TRIAL through ANOVA (analysis of variance) using the combination of response surface methodology (RSM) and central composite design (CCD).     

Evolutive and nonlinear vibrations of rotor on aerodynamic bearings

The use of air as a lubricant in aerodynamic bearings is advantageous, particularly in the food industry. Aerodynamic bearings with tilting pads have complicated stiffness and damping properties and need a very detailed theoretical and experimental research. Response curves of rigid rotor supported on aerodynamic bearings are presented for a linear but evolutive mathematical model. Due to non-monotone properties of stiffness and damping matrices at variable revolutions, a new resonance appears. The mathematical model of rotor vibrations in the whole area of bearing clearance is also developed in the consideration of strongly nonlinear properties of aerodynamic bearing.     

On-line solid-phase extraction-HPLC-fluorescence detection for simultaneous determination of puerarin and daidzein in human serum

Response surface methodology (RSM) was applied to the optimization of on-line solid-phase extraction (SPE) parameters, and an automated system of on-line SPE coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was developed for the determination of puerarin and daidzein in human serum. The human serum sample of 50 μL was injected into a conditioned C18 SPE cartridge, and the matrix was washed out with acetonitrile-KH₂PO₄-triethylamine buffer (0.01 M, pH 7.4) (3:97, v/v) for 3 min at a flow rate of 0.25 mL/min. Then the target analytes were eluted and transferred to the analytical column. A chromatographic gradient elution was programmed with the mobile phase consisting of acetonitrile and KH₂PO₄-triethylamine buffer, and the analytes were determined with a fluorescence detector at excitation wavelength of 350 nm and emission wavelength of 472 nm, respectively. The proposed method presented good linear relations (0.85-170 μg/mL for puerarin and 0.2-40 μg/mL for daidzein), satisfactory precision (RSD < 8%), and accredited recovery (92.5-107.8%).     

Composition determination of binary polymer mixtures by size exclusion chromatography with light scattering detection

<正>Base on the principle of absolute quantification of size exclusion chromatography(SEC),a light scattering(LS) detector coupled with a concentration detector(refractive index detector) is utilized to determine the compositions of complicated binary mixtures.A theoretical analysis predicts that the response factors for both LS and RI detectors are linear functions with the composition of any specified polymer mixtures in the binary polymer mixtures.Two pairs of complicated binary mixtures were used to test the theory mentioned in the present paper,and the experimental results show an excellent accordance with the theory.     

Cascading of liquid crystal elastomer photomechanical optical devices

Photomechanical actuation is demonstrated in two coupled liquid crystal elastomer photomechanical optical devices (PODs) acting in series. The response function of an individual POD is characterized and used to predict the temporal response of the coupled system. The predicted coupled-system response agrees with the experiment for several waveforms and frequencies, suggesting that large-scale integration of photomechanical devices is possible.