Macrokinetic study on ozone boundary concentration. Effect of temperature

The process of ozone production in pure oxygen using the tubular, high voltage pulse supplied ozonizer was studied. The unusual methodology of conducting kinetics measurements of the ozone synthesis process was presented. It was shown how the process rate changes along the discharge gap. The effect of power density and gas residence time in the discharge gap on the process rate was analysed. The temperature influence on the course of the process, particularly on the ozone boundary concentration and ozone decomposition rate constant, was discussed.     

Simultaneous determination of 11 related impurities in propofol by gas chromatography/tandem mass spectrometry coupled with pulsed splitless injection technique

A variety of related impurities, including starting materials, process impurities, and degradation products, can be detected in propofol. In this article, a sensitive and selective GC‐MS/MS method using pulsed splitless injection technique for the determination of 11 main related impurities in propofol in one chromatogram is investigated. This method is extensively validated for its linearity, recovery, precision, LOD, and LOQ, and is able to detect trace‐level related impurities (LOD = 0.2–5.6 μg/g) in propofol bulk drug. Stressed tests proposed that oxidative degradation, photolytic degradation, and heat are the main causes for the formation of degradation products in propofol.     

Novel chemical synthesis of polypyrrole thin film electrodes for supercapacitor application

Present investigation describes the cost-effective, novel and simple chemical synthesis of polypyrrole (PPy) thin films for supercapacitor application. These PPy films are characterized by different techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The XRD pattern reveals the amorphous nature of PPy thin film, which is highly feasible for supercapacitors. Further, FTIR study confirms the formation of PPy. The surface morphological study exhibit the coverage of uniform and smooth morphology on thin film. The electrochemical supercapacitive properties of PPy thin films are evaluated using cyclic voltammetry (CV) in 0.5 M H₂SO₄ electrolyte, which exhibits the maximum specific capacitance of 329 Fg⁻¹ at the scan rate of 5 mV s⁻¹. Additionally, an equivalent series resistance (ESR) of PPy thin films is found to be 1.08 Ω using electrochemical impedance measurement.     

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

This study investigates the use of both amplitude and time-of-flight based pulsed ultrasonic polar scan (P-UPS) as a sophisticated non-destructive damage sensor for fiber reinforced composites. Focus is put on stiffness related damage phenomena, which are in general difficult to monitor nondestructively, and their associated signature in the P-UPS image. Various composite samples, with different damage states, have been inspected at multiple material spots with the P-UPS technique. The results demonstrate the capability of the P-UPS method to obtain a unique signature of the local material damage characteristics. Several indicators in the acquired P-UPS images have been identified from which the type and level of material degradation can be obtained. The P-UPS extracted characteristics are fully supported by simulations, conventional tests as well as visual inspection.     

辉光放电质谱技术应用进展

对辉光放电质谱(GDMS)在金属与半导体、非导体、薄层与深度分析、分子信息分析方面的应用和一些新装置、新方法进行了综述.着重介绍了近20年来我国学者在辉光放电质谱方面的成就,并结合国际上的报道对该领域的发展现状进行了总结.     

电子能量对沿面介质阻挡放电等离子体化学产物的影响

基于光电倍增管研制了一套无触发信号的双通道光学探测系统, 并组装了测试样机, 实现了对沿面介质阻挡放电(SDBD)等离子体约化电场的测量, 进而通过BOLSIG+软件获得了电子能量. 采用原位紫外吸收光谱和傅里叶变换红外光谱, 研究了SDBD等离子体在不同电压和频率下的化学产物的浓度变化, 并结合空气等离子体化学反应揭示了产物相互作用的微观机理. 结果表明, 电子能量能够改变电子碰撞反应的速率系数, 调控化学反应的源头活性粒子的浓度, 进而影响到化学产物的生成和猝灭.     

Composite Polybenzimidazole Membrane with High Capacity Retention for Vanadium Redox Flow Batteries

Currently, energy storage technologies are becoming essential in the transition of replacing fossil fuels with more renewable electricity production means. Among storage technologies, redox flow batteries (RFBs) can represent a valid option due to their unique characteristic of decoupling energy storage from power output. To push RFBs further into the market, it is essential to include low-cost materials such as new generation membranes with low ohmic resistance, high transport selectivity, and long durability. This work proposes a composite membrane for vanadium RFBs and a method of preparation. The membrane was prepared starting from two polymers, meta-polybenzimidazole (6 μm) and porous polypropylene (30 μm), through a gluing approach by hot-pressing. In a vanadium RFB, the composite membrane exhibited a high energy efficiency (~84%) and discharge capacity (~90%) with a 99% capacity retention over 90 cycles at 120 mA·cm⁻², exceeding commercial Nafion^® NR212 (~82% efficiency, capacity drop from 90% to 40%) and Fumasep^® FAP-450 (~76% efficiency, capacity drop from 80 to 65%).     

Electrical characterisation of phosphorus-doped ZnO thin films grown by pulsed laser deposition

Phosphorus-doped ZnO films were grown by pulsed laser deposition using a ZnO:P₂O₅-doped target as the phosphorus source with the aim of producing p-type ZnO material. ZnO:P layers (with phosphorus concentrations of between 0.01 to 1 wt%) were grown on a pure ZnO buffer layer. The electrical properties of the films were characterised from temperature dependent Hall-effect measurements. The samples typically showed weak n-type conduction in the dark, with a resistivity of 70 Ω cm, a Hall mobility of μ_n0.5 cm² V ⁻¹ s⁻¹ and a carrier concentration of n3×10¹⁷ cm⁻³ at room temperature. After exposure to an incandescent light source, the samples underwent a change in conduction from n- to p-type, with an increase in mobility and decrease in concentration for temperatures below 300 K.     

Removal of low-concentration benzene in indoor air with plasma-MnO2 catalysis system

Non-thermal plasma (NTP) and combined plasma-MnO₂ catalytic (CPMC) air cleaners were tested for removal of low-concentration benzene in air. Both air cleaners were made of stainless steel needle matrix plate and used DC corona discharger. The effects of discharge power and relative humidity (RH) on benzene removal efficiency were investigated in a closed chamber. The intermediate products produced in purification processes were analyzed using gas chromatography-mass spectrometer (GC-MS). The concentrations of discharge byproducts and CO₂ selectivity produced in both processes were also compared. It was found that the benzene removal efficiency increased with discharge power in both systems; With the increase of RH in air, benzene removal efficiency firstly increased and then decreased in NTP while it gradually decreased in CPMC. For a fixed discharge power of 9 W and RH of 20% in CPMC, the conversion of benzene increased from 82.9% to 89.6%, the CO₂ selectivity increased from 38% to 80%, the concentration of O₃ decreased from 25.3 ppm to 1.3 ppm, and NO₂ formation decreased from 234 ppm to 25.7 ppm, compared with NTP.     

A domain decomposition method for three species modeling of multi-electrode negative corona discharge – With applications to electrostatic precipitators

The negative corona discharge problem for multi-electrode geometries is modeled by a three species model. The equations are solved using domain decomposition, by recognizing that multiple species are only present in a small part of the domain, and hence only need to be incorporated locally in the model.The method is applied to an industrially relevant three wire electrostatic precipitator geometry. The calculated current density is in good agreement with experimental data. To further illustrate applications of the three species solution, it is used for coupled particle, fluid, and electrostatic simulations to analyze particle collection properties.