大学物理实验的简化与深化

以复摆实验、地磁实验和衍射光栅实验为例,说明在大学物理实验中,通过提供简单的实验器材,就可以将实验内容延伸扩展,将原来内容单一的实验扩展为多层次、多目的的实验项目,实现大学物理实验的简化与深化.     

基于DSP的光纤光栅应变传感器信号检测实验研究

针对光纤光栅应变传感器接收信号弱且信噪比低这一问题,提出了应用DSP技术来抑制噪声,提高Bragg峰值波长检测精度的方法.实验结果表明所设计的498阶Kaiser窗低通FIR数字滤波器能够显著提高光纤光栅应变传感器的信号检测精度.采用DSP技术可以较好地解决光纤光栅传感器的波长解调这一技术难题.     

带宽调制型单光纤光栅温变无补偿位移传感

报道了利用反射谱带宽调制和光强差分探测技术实现单一光纤光栅温变无补偿位移精确测量的新方法。设计了一种结构新颖的曲臂梁位移传感装置,结合光波导理论与材料力学原理分析了光纤光栅在高斯应变作用下光栅反射谱侧向梯度展宽的成因,理论推导了特殊结构梁在外力作用下光栅反射谱带宽/反射光强与压力之间的响应关系。光栅反射谱侧向梯度展宽的同时反射光强线性增加,利用光强差分检测方法消除光源出光抖动的影响,提高了位移测量精度。基于带宽调制的光纤光栅位移传感方法免受温度变化的影响,在-10℃~80℃的温度变化范围内,测量误差小于1.2%,实现了单光纤光栅温变无补偿位移测量。     

强外加电场与大调制度下光折变动力学光栅形成研究

强外加电场与大调制度在光折变效应的研究中已经得到了广泛应用。采用PDECOL算法,严格求解光折变带输运方程,得到外加电场时不同调制度下光折变晶体中随时间变化的空间电荷场、载流子浓度,并讨论了外加电场对它们的影响。通过将物质方程与耦合波方程联立数值求解,可得到光折变光栅形成过程中两波耦合增益系数以及光束条纹相位的变化。模拟结果表明,在强外加电场作用下,两束记录光之间的光强与相位耦合都得到了增强,而原有的解析式忽视了强外加电场与大调制度对空间电荷场相位耦合的影响,此时不再适用。同时发现折射率光栅与记录光束条纹均发生弯曲,并不再保持平行。     

光纤微机电系统法布里-珀罗压力传感器的波分复用

提出了一种用阵列波导光栅复用光纤微机电系统法布里-珀罗压力传感器的方法,实现了法布里-珀罗压力传感器的准分布式测量。传感器基于法布里-珀罗腔干涉的原理,采用微机电系统技术加工制作,用双波长方法解调干涉信号,利用传感器对两个不同波长光的反射率的比值与压力的单值关系确定所施加压力的大小,用阵列波导光栅实现传感器复用。理论分析与实验验证了传感器解调和复用的基本原理。实验结果表明:在压力的线性测量范围(0~1.5 MPa)内,系统的灵敏度(相对反射率比值/压力)可达到0.02026 MPa-1,测量结果具有较好的线形性,相对反射率比值的标准偏差小于3×10-4。该系统可以补偿传感器光网中和波长无关的变动引起的误差,具有好的线性、灵敏度和精度,复用能力强且复用传感器间无串扰。     

数字光处理背投电视色度学特性的研究

以色度学的基本理论为基础,结合数字光处理光学引擎的工作原理,探讨了单片式数字光处理光学引擎的彩色显示原理和色温调节原理.提出了单片式数字光处理光学引擎色度学特性的理论计算公式,并利用该公式对夏新DL52HWT型投影电视光学引擎的显示三原色色度坐标、白场平衡的色度坐标和相关色温以及颜色复现误差等色度学特性进行了计算和分析,并对理论计算公式进行了验证.     

全光纤激光相干合成光谱响应特性研究

基于N-腔镜谐振腔理论对全光纤激光相干合成进行了理论分析，数值模拟了迈克尔逊型相干合成激光器的光谱特性，对两个光纤Bragg光栅的中心波长差和两路光的光程差对合成光谱特性的影响给出了理论解释.用啁啾光纤光栅取代其中一个光纤Bragg光栅，使激光相干合成的带宽由0.3 nm拓展到1.0 nm.     

Effect of boron concentration on the UV photosensitivity of silica glass film for planar lightwave circuit

The photosensitivity dynamics in SiO₂ glass with a composition similar to that of silica planar lightwave circuit (PLC) devices was investigated as a fundamental study prior to device fabrication. Silica bulk glasses with similar composition to the core layer of PLC devices were prepared with various concentrations of B₂O₃. The photosensitivity in boron and germanium co-doped amorphous SiO₂ yields a refractive index change Δn as high as 10⁻³ after irradiation with a KrF UV laser beam. The index modulation disappeared after thermal annealing. The result of annealing experiment and UV absorption/Raman spectra revealed that the molar volume change by UV irradiation is responsible for the index variation in the material.     

Optimization of thin-film design for multi-layer dielectric grating

Thin-film design used to fabricate multi-layer dielectric (MLD) gratings should provide high transmittance during holography exposure, high reflectance at use wavelength and sufficient manufacturing latitude of the grating design making the MLD grating achieve both high diffraction efficiency and low electric field enhancement. Based on a (HLL)⁹H design comprising of quarter-waves of high-index material and half-waves of low-index material, we obtain an optimum MLD coating meeting these requirements by inserting a matching layer being half a quarter-wave of Al₂O₃ between the initial design and an optimized HfO₂ top layer. The optimized MLD coatings exhibits a low reflectance of 0.017% under photoresist at the exposure angle of 17.8° for 413 nm light and a high reflectance of 99.61% under air at the use angle of 51.2° for 1053 nm light. Numerical calculation of intensity distribution in the photoresist coated on the MLD film during exposure shows that standing-wave patterns are greatly minimized and thus simulation profile of photoresist gratings after development demonstrates smoother shapes with lower roughness. Furthermore, a MLD gratings with grooves etched into the top layer of this MLD coating provides a high diffraction efficiency of 99.5% and a low electric field enhancement ratio of 1.53. This thin-film design shows perfect performances and can be easily fabricated by e-beam evaporation.     

Mechanically formed loss-tunable long-period fiber gratings realized on the periodic arrayed metal wires

A new method to tune the peak loss of mechanically formed long-period fiber gratings (MLPFGs) is proposed. Periodic arrayed metal wires are used to obtain the gratings along a single mode fiber (SMF). Self-maintaining gratings are achieved by the bonding force of an UV-adhesive between two glass plates. The initial index modulation formed at room temperature creates a maximum attenuation of −9 dB and −12 dB for coated and uncoated SMF, respectively. By changing the temperature, the peak loss is tuned due to the large thermal expansion of the UV-adhesive. Thermally tunable characteristics caused by the coating layer of the SMF are also described and compared with the results of the device with an uncoated SMF.