氟的离子选择电极瞬时电位法测定

研究了氟离子选择电极瞬时电位分析法，其检出限和Nernst响应下限均低于传统电位分析法，空白液切换到试液时瞬时电位达到稳定的峰电位Vp比传统电位法的响应快得多，可以实现小体积试液的快速准确分析；用该法测定了自来水和矿泉水中氟的含量；利用校正曲线的截距和检出限计算了LaF3的溶度积，在0.1mol/L KNO3介质中Ksp(LaF3)=10^-28.45，在0.001mol/L柠檬酸钠＋HAc-NaAc缓冲液（pH=5.50，离子强度I＝0.10mol/L)介质中溶度积K′sp(LaF3)=10^-26.26；据此，计算得柠檬酸与La^3 络合物的稳定常数K1=10^5.46和K2=10^3.99；用离子水合吉氏自由能ΔGh(F^-,g)解释了不同浓度F^-试液瞬时电位的跃迁时间。     

Evaluation of Multicenter Electronic Attraction, Electric Field and Electric Field Gradient Integrals with Screened and Nonscreened Coulomb Potentials over Integer and Noninteger n Slater Orbitals

By the use of complete orthonormal sets of -exponential-type orbitals, where ( = 1, 0, –1, –2,...) the multicenter electronic attraction (EA), electric field (EF) and electric field gradient (EFG) integrals of nonscreened and Yukawa-like screened Coulomb potentials are expressed through the two-center overlap integrals with the same screening constants and the auxiliary functions introduced in our previous paper (I.I. Guseinov, J. Phys. B, 3 (1970) 1399). The recurrence relations for auxiliary functions are useful for the calculation of multicenter EA, EF and EFG integrals for arbitrary integer and noninteger values of principal quantum numbers, screening constants, and location of slater-type orbitals. The convergence of the series is tested by calculating concrete cases.     

Pressure Effects on Thermodynamics of Phase Behavior in Polystyrene/Methylcyclohexane Solutions

The calculations presented in this paper are based on the Sanchez-Lacombe(SL)lattice fluid theory.The interaction energy parameter,g12/k,required in this approach was obtained by fitting the cloud points of polystyrene(PS)/methylcyclohexane(MCH)polymer solutions under pressure.The SL lattice fluid theory was used to calculate the spinodals,the binodals,and the Flory-Huggins(FH)interaction parameter of the solutions.The calculated results show that the SL lattice fluid theory can describe the dependences of thermodynamics of PS/MCH solutions on temperature and pressure very well.However,the calculated enthalpy and the excess volume changes indicate that the Clausius-Clapeyron equation cannot be suitable to describe pressure effect on PS/MCH solutions.Further analysis on the thermodynamics of this system under pressure shows that the role of entropy is more important than the excess volume in the present case.     

Effect of pressure on the adsorption and micelle formation of aqueous dodecyltrimethylammonium chloride solution-hexane system

The interfacial tension of aqueous dodecyltrimethylammonium chloride (DTAC) solution/hexane interface has been measured as a function of pressure at concentrations around the critical micelle concentration (CMC). The derivative of the interfacial tension with respect to pressure has been observed to change abruptly at the CMC as in the case of aqueous dodecylammonium chloride (DAC) solution-hexane system studied already. The volume changes associated with the adsorption of DTAC from its monomeric and micellar states have been calculated. The results have indicated that the micelle formation of surfactant is treated like the appearance of a new macroscopic phase in the system. It has also been concluded that the micelle solubilizing hexane bears resemblance to the adsorbed film in terms of the volume. The difference in the pressure dependence of the volume of micelle formation ^MW between DTAC and DAC has been attributed to a larger polar group of DTAC. The fact that the value of ^MW is larger than that estimated from the conductivity data has been explained by the solubilization of hexane into the micelle.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

反相高效液相三元流动相台阶梯度分离条件的快速优化方法

 根据溶质在柱内的迁移规律 ,建立了一种利用线性梯度实验快速获得溶质保留值方程系数 ,然后以串行响应函数为优化指标进行多台阶梯度分离条件优化的方法。与利用等度实验获得保留值方程的方法相比 ,该法可以大大缩短优化时间。通过该方法对芳香胺和衍生化氨基酸样品进行了分离 ,获得了满意的分离度 ,表明该方法的预测精度很好。     

程序涂渍柱“柱效能程序效应”的研究

本文从理论上给出程序柱“柱效能程序效应”的概念并导出了函数关系式,通过计算机可计算柱效能程序效应与柱内各变量之间的关系,实践证明实验数据的变化趋势与理论数据相符。     

Effect of pressure on retention factors in HPLC using a non-porous stationary phase

Summary Pressure and temperature have significant influence on retention in HPLC. This study investigates the effect of pressure and temperature on the retention behavior of aromatic hydrocarbons (toluene, ethyl benzene, butyl benzene, pentyl benzene) and polar, acidic and basic samples (phenol, acetophenone, N,N-dimethyl aniline, benzophenone) on a reversed phase column. The effect has been studied on non-porous, tetradecyl (C₁₄) coated silica particles. We found that the adsorption-induced decrease of the partial molar volume of the solutes investigated was between ΔV _m =5–15 cm³ mol⁻¹. The increment of the decrease of the partial molar volume due to the addition of one CH₂ group, for the homologous series of the aromatic hydrocarbons is approximately ΔV _CH2 =2.3 cm³mol⁻¹. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001.     

Ab initio calculations ofp-Cl2C6H4 molecule and its35Cl NQR parameters

Ab initio calculations ofp-dichlorobenzene molecule were carried out using the Hartree-Fock method in the 6–31 G* valence-split basis set. The molecule was also calculated by the MNDO method in the valence sp-basis set for comparison. The populations of the valent p-orbitals of the C and CI atoms were analyzed. The optimized geometry of the molecule as well as its³⁵Cl NQR frequency and the asymmetry parameter of the electric field gradient at the³⁵CI nuclei calculated using the populations of the less diffuse components of the valent p-orbitals of the Cl atoms are in agreement with the corresponding experimental values for the -modification of 1,4-Cl₂C₆H₄.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2177–2179, September, 1996.     

Sequential injection analysis with dynamic surface tension detection High throughput analysis of the interfacial properties of surface-active samples

A sequential injection analysis (SIA) system is coupled with dynamic surface tension detection (DSTD) for the purpose of studying the interfacial properties of surface-active samples. DSTD is a novel analyzer based upon a growing drop method, utilizing a pressure sensor measurement of drop pressure. The pressure signal depends on the surface tension properties of sample solution drops that grow and detach at the end of a capillary tip. In this work, SIA was used for creating a reagent concentration gradient, and for blending the reagent gradient with a steady-state sample. The sample, consisting of either sodium dodecyl sulfate (SDS) or poly(ethylene glycol) at 1470 g mol⁻¹ (PEG 1470), elutes with a steady-state concentration at the center of the sample plug. Reagents such as Brij®35, tetrabutylammonium (TBA) hydroxide and β-cyclodextrin were introduced as a concentration gradient that begins after the sample plug has reached the steady-state concentration. By blending the reagent concentration gradient with the sample plug using SIA/DSTD, the kinetic surface pressure signal of samples mixed with various reagent concentrations is observed and evaluated in a high throughput fashion. It was found that the SIA/DSTD method consumes lesser reagent and required significantly less analysis time than traditional FIA/DSTD. Four unique chemical systems were studied with regard to how surface activity is influenced, as observed through the surface tension signal: surface activity addition, surface activity reduction due to competition, surface activity enhancement due to ion-pair formation, and surface activity reduction due to bulk phase binding chemistry.