非晶碳氧化硅纳米线的合成与光致发光

利用直流电弧放电合成非晶碳氧化硅(SiCO)纳米线,不使用催化剂和模板,独立的SiCO 纳米线沉积在石墨锅的表面．通过XRD、SEM、TEM、XPS、FTIR等对SiCO纳米线进行了表征．结果表明,纳米线长度为20～100 μm,直径为10～100 nm,Si原子同C原子和氧原子分享成键组成SiCO单元．SiCO纳米线的光致发光谱在454和540 nm呈现了强而稳定的白色发光峰． SiCO纳米线的生长机制为等离子辅助气―固生长机制．     

Physical reasons of emission transformation in infrared CdSeTe/ZnS quantum dots at bioconjugation

The core/shell CdSeTe/ZnS quantum dots (QDs) with emission at 780–800 nm (1.55–1.60 eV) have been studied by means of photoluminescence (PL) and Raman scattering methods in the nonconjugated state and after conjugation to different antibodies (Ab): (i) mouse monoclonal [8C9] human papilloma virus Ab, anti-HPV 16-E7 Ab, (ii) mouse monoclonal [C1P5] human papilloma virus HPV16 E6+HPV18 E6 Ab, and (iii) pseudo rabies virus (PRV) Ab. The transformations of PL and Raman scattering spectra of QDs, stimulated by conjugated antibodies, have been revealed and discussed.The energy band diagram of core/shell CdSeTe/ZnS QDs has been designed that helps to analyze the PL spectra and their transformations at the bioconjugation. It is shown that the core in CdSeTe/ZnS QDs is complex and including the type II quantum well. The last fact permits to explain the nature of infrared (IR) optical transitions (1.55–1.60 eV) and the high energy PL band (1.88–1.94 eV) in the nonconjugated and bioconjugated QDs. A set of physical reasons has been analyzed with the aim to explain the transformation of PL spectra in bioconjugated QDs. Finally it is shown that two factors are responsible for the PL spectrum transformation at bioconjugation to charged antibodies: (i) the change of energy band profile in QDs and (ii) the shift of QD energy levels in the strong quantum confinement case. The effect of PL spectrum transformation is useful for the study of QD bioconjugation to specific antibodies and can be a powerful technique for early medical diagnostics.     

Effect of Fe-doping on the structural,morphological and optical properties of ZnO nanoparticles synthesized by solution combustion process

The effect of Fe-doping on the structural, morphological and optical properties of ZnO nanoparticles synthesized by simple solution combustion process are reported. The powder XRD pattern indicates that the Fe-doped ZnO samples exhibit primary and secondary phases. The primary phase indicates the hexagonal wurtzite structure with the average crystalline size of around 25–50 nm and the secondary phase is associated with the face centered cubic structure of magnetite iron oxide. The elemental composition of pure and Fe-doped samples are evaluvated by EDX. The results of FE-SEM and HR-TEM cleary show that particles morphology have changed with respect to the incorporation of doping agent and particles are in aggregating nature. The vibrational properties of the synthesized ZnO nanoparticles are investigated by Raman scattering technique and it exhibits that the influence of Fe-doping significantly modify the lattice vibrational characteristics in ZnO sites. The optical properties of the Fe-doped ZnO nanoparticles are carried out by UV–vis absorption and PL spectra. The results of PL spectra show the near-band edge related emission as well as strong blue emissions in the Fe-doped ZnO nanoparticles.     

Enhanced room temperature ferromagnetism and photoluminescence behavior of Cu-doped ZnO co-doped with Mn

Cu, Mn co-doped ZnO nanoparticles were successfully synthesized by the sol–gel technique. XRD pattern described that Mn-doping did not affect the hexagonal wurtzite structure of the samples and no secondary phases were found. The reduced crystallite size at Mn=2% is due to the suppression of grain surface growth by foreign impurity. The enhancement of crystal size after Mn=2% is due to the expansion of lattice volume produced by the distortion around the dopant ion. The better dielectric constant and conductivity noticed at Mn=2% are explained by charge carrier density and crystallite size. The suppression of broad UV band by Mn-doping is discussed based on the generation of non-radiative recombination centers. Hysteresis loop showed the clear room temperature ferromagnetism in all the samples and the magnetization increased with Mn-doping. Better electrical and magnetic behavior of Zn_0.94Cu_0.04Mn_0.02O sample is suggested for effective opto-magnetic devices.     

Defect induced paramagnetism in lightly doped ZnS:Fe nanoparticles

Nanoparticles of ZnS:Fe (0, 1, 3, and 5 at%) were synthesized by a refluxing route at 80 °C. All the samples exhibited cubic structure as revealed by X-ray powder diffraction studies. Blue emission of undoped samples was totally quenched by Fe doping. Magnetic measurements showed that the undoped ZnS was diamagnetic whereas all the doped samples were paramagnetic at room temperature. EPR signal characteristic of Fe³⁺ was observed in all the doped samples at room temperature. The paramagnetism of the present samples is attributed to the presence of uncoupled Fe³⁺ ions mediated by cation vacancies.     

A novel red-emitting phosphor Ca9Bi(PO4)7:Eu3+ for near ultraviolet white light-emitting diodes

Red phosphors Ca₉Bi_1-x(PO₄)₇:xEu³⁺ (x = 0.06, 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80 and 1.00) were synthesized by a conventional solid-state reaction (SSR) route. The X-ray diffraction patterns, photoluminescence spectra, ultraviolet–visible reflection spectroscopy, decay time and the International Commission on Illumination (CIE) chromaticity coordinates of these compounds were characterized and analyzed. The Eu-doped Ca₉Bi(PO₄)₇ phosphors exhibited strong red luminescence which peaks located at 615 nm due to the ⁵D₀→⁷F₂ electric dipole transition of Eu³⁺ ions after excitation at 393 nm. Ultraviolet–visible spectra indicated that the band-gap of Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ is larger than that of Ca₉Bi(PO₄)₇. The results indicate that the phosphor Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ can be a suitable red-emitting phosphor candidate for LEDs.     

Influence of substrate activation process on structural and optical properties of ZnS thin films

ZnS thin films were deposited on glass substrates by a chemical bath deposition method using a substrate activation process in which aluminum ions become “contaminants” that act as a nucleation center for active components within the deposition solution. The structure and morphology results demonstrate that the films have a ZnS sphalerite crystal structure with a particle size less than 15 nm, and the films consist of small homogeneous grains. The effects of the substrate activation process on the band gap energies and donor-acceptor pair luminescence process were also investigated. A green emission centered at 502 nm was produced due to donor-acceptor transitions from the aluminum acceptor to the ionized and substitution aluminum centers (Al³⁺).     

Amino acids (l-arginine and l-alanine) passivated CdS nanoparticles: Synthesis of spherical hierarchical structure and nonlinear optical properties

CdS nanoparticles (NPs) passivated with amino acids (l-alanine and l-arginine) having spherical hierarchical morphology were synthesized by room temperature wet chemical method. Synthesized NPs were characterized by ultraviolet–visible (UV–vis) spectroscopy to study the variation of band gaps with concentration of surface modifying agents. Increase in band gap has been observed with the increase in concentration of surface modifying agents and was found more prominent for CdS NPs passivated with l-alanine. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis were carried out for the study of crystal structure and morphology of CdS NPs. The average particle size of CdS NPs calculated from Debye-Scherer formula was found to less than 5 nm and agrees well with those determined from UV–vis spectra and TEM data. Fourier transform infrared (FT-IR) spectroscopy was performed to know the functional groups of the grown NPs. Peaks in FT-IR spectra indicate the formation of CdS NPs and capping with l-alanine and l-arginine. Photoluminescence spectra of these NPs were also studied. Finally, colloidal solution of CdS-PVAc was subjected to Z-scan experiment under low power cw laser illumination to characterize them for third order nonlinear optical properties. CdS-PVAc colloidal solution shows enhanced nonlinear absorption due to RSA and weak FCA on account of two photon absorption processes triggered by thermal effect.     

Structural,optical and dielectric relaxor properties of neodymium doped cubic perovskite (Ba1−xNd2x/3)(Zr0.3Ti0.7)O3

Neodymium doped Barium Zirconate Titanate (Ba_1−xNd_2x/3)(Zr_0.3Ti_0.7)O₃ (x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10) ceramics were prepared using the solid state reaction route. Structural characterizations of the materials were done by using X-ray diffraction and Raman spectroscopy. XRD study suggested that all the compositions were of single phase cubic perovskite structure with space group Pm-3m while Raman spectra revealed that the replacement of the Ba²⁺ ions by Nd³⁺ ions significantly reduced the intensity of the Raman active modes and shifted them towards higher energy side. Room temperature optical property was analyzed by photoluminescence spectroscopy, which confirmed formation of shallow defects in the band gap. Photoluminescence property was attributed to the presence of polar [TiO₆] distorted clusters in the globally cubic matrix. As a result PL emission spectra of these materials were found to belong to violet–blue regions. Microstructural study of sintered pellets revealed that the grain sizes increase with increase in doping concentration. The temperature dependence of the dielectric properties was investigated in the frequency range 1 kHz to 1 MHz. The broadening in the dielectric constant peak around the phase transition temperature and shifting of the temperature maximum towards higher temperatures with increase in frequency indicated a relaxor type of behavior.     

Solvo-thermal Preparation and Characterization of Two CdII Coordination Polymers Constructed From 2,6-(1,2,4-Triazole-4-yl)pyridine and 5-R-Isophthalic Acid (R = Nitro,Sulfo)

Under the solvo-thermal conditions, two novel Cd^II mixed-ligand coordination materials with 2,6-(1,2,4-triazole-4-yl)pyridine(L₁) and aromatic poly-carboxylic acid co-ligands such as 5-R-isophthalic acid (R = nitro, sulfo), namely [Cd(L₁)(NO₂-BDC)(H₂O)₂] · 2H₂O ( 1 ) and [Cd(L₁)(HSIP)(H₂O)] · 4H₂O ( 2 ) (NO₂-H₂BDC = 5-nitroisophthalic acid, H₃SIP = 5-sulfobenzene -isophthalic acid) were successfully prepared. These Cd^II mixed-ligand coordination polymers 1 – 2 have been measured by crystal X-ray analysis, FT-IR spectra and powder X-ray diffraction analyses. In 1 , these seven-coordinate Cd^II atoms (Cd1) are inter-linked by didentate 5-nitroisophthalic acid ligands forming 1D chain structures. In 2 , these L₁ and partially de-pronated HSIP^2– are inter-linked by central Cd^II centers and are arranged into the unique 2D micro-porous metal-organic framework of 2 . Side view of 2 , it is noted that numerous oxygen atoms of un-coordinated carboxylate groups and coordinated SO₃ groups protrude out and decorate the 2D framework of 2 . PXRD patterns of 1 and 2 sample is tested, which is consistent with the simulated PXRD diffraction pattern. Photoluminescence studies show that 2 is highly selective and sensitive to trace elements of Eu³⁺ with excellent K_sv value (7.86 × 10⁴ m ^–1) and low detection limit (5.56 × 10^–2 mM), which also provides a convenient method and platform for real-time detection of Eu³⁺.