Highly diastereoselective multicomponent synthesis of polysubstituted 2-hydroxy-2-trifluoromethylpiperidineswith four and five stereogenic centers

The Michael–Mannich cascade cyclization of cyano olefins, ethyl 4,4,4-trifluoro-3-oxobutanoate, aromatic aldehydes and ammonium acetate provides convenient stereoselective formation of ethyl 5,5-dicyano-4,6-diaryl-2-hydroxy-2-(trifluoromethyl)piperidine-3-carboxylates with fourstereogenic centers and dialkyl 4,6-diaryl-5-cyano-2-hydroxy-2-(trifluoromethyl)piperidine-3,5-dicarboxylates with five stereogenic centers. Ammonium acetate plays dual role, acting as a base and as a nitrogen source.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Electrospinning of ultrafine cellulose acetate fibers: Studies of a new solvent system and deacetylation of ultrafine cellulose acetate fibers

Electrospinning of cellulose acetate (CA) in a new solvent system and the deacetylation of the resulting ultrafine CA fibers were investigated. Ultrafine CA fibers (∼2.3 μm) were successfully prepared via electrospinning of CA in a mixed solvent of acetone/water at water contents of 10–15 wt %, and more ultrafine CA fibers (0.46 μm) were produced under basic pH conditions. Ultrafine cellulose fibers were regenerated from the homogeneous deacetylation of ultrafine CA fibers in KOH/ethanol. It was very rapid and completed within 20 min. The crystal structure, thermal properties, and morphology of ultrafine CA fibers were changed according to the degree of deacetylation, finally to those of pure cellulose, but the nonwoven fibrous mat structure was maintained. The activation energy for the deacetylation of ultrafine CA fibers was 10.3 kcal/mol. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 5–11, 2004     

Reaction Intermediates on TiO2(110) Identified by Time-Lapse Scanning Tunneling Microscopy

The present account describes first time examples of scanning tunneling microscope (STM) visualization of reaction intermediates on a metal oxide surface. The topographic response of reactant-adsorbed TiO₂(110) surfaces to a temperature increment or to a pressure increment was monitored as a sequence of STM images. Acetates thermally decomposing to ketene were resolved in a temperature-jump STM observation. The kinetics of the acetate consumption was determined on the number of acetates resolved in the microscope images and agreed with the macroscopic rate law of ketene production. A pressure-jump study revealed how a chemisorbed carboxylate (RCOO^-) is exchanged by another carboxylate (R'COO^-) supplied from the ambient vapor phase. An impinging R'COOH was immobilized on the top of a RCOO^- and then squeezed itself into the monolayer of the RCOO^-. One of the carboxylates in the squeezed state returned to the vapor phase via the immobilized state.     

Vapor-liquid equilibrium data at 25°C for six binary systems containing methyl acetate or methanol,with dichloromethane,chloroform, or 1,2-trans-dichloroethylene

Isothermal vapor-liquid equilibrium (VLE) data, at 25° C were determined by a saturation method for each of the six methanol or methyl acetate binary systems with dichloromethane, chloroform, and 1,2-trans-dichloroethylene. The experimental data satisfy the Redlich-Kister consistency test, and were correlated with five Gibbs free energy models. All the binary mixtures of methanol with the chlorinated compounds exhibit strong positive deviations from ideality while the mixtures of methyl acetate with the chlorinated compounds present negative deviations from ideal behavior.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.     

Studies on pre-hump and main fractions of cellulose-2,5-acetate in acetone

Technical cellulose-2.5-acetates (CA 2.5) were characterized regarding their carbohydrate composition in comparison to the raw material. The association of the CA 2.5 samples in acetone was studied by size exclusion chromatography (SEC) using various acetone grades and styrene divinylbenzene copolymer columns. In HPLC grade acetone with and without addition of 1% water up to three different pre-humps eluted in front of the main fraction of the polymer. The evaluation of the main peak by light scattering measurements resulted in high molar masses indicating that for these technical CA 2.5 samples even the main fraction is not dissolved without association. No pre-humps or association phenomena were observed after addition of 1 ppm LiBr to HPLC grade acetone or with p.a. grade acetone. In addition pre-hump enriched and pre-hump free fractions were isolated by fractionated precipitation. The carbohydrate composition of these fractions was determined and correlated with their association pattern in SEC investigations.     

The dehydration of copper(II) acetate monohydrate

The thermal dehydration of copper(II) acetate hydrate has been studied between 353 and 406 K, over a range of humidities. The dehydration is controlled by nucleation-and-growth kinetics at low temperatures, with an activation energy of 154 kJ·mol⁻¹, which changes to contracting-disc kinetics at higher temperatures with a lower activation energy of 76 kJ·mol⁻¹. Frequency factors have also been derived; the value for the high temperature process is low (10⁷s⁻¹) and that for the low temperature step is high (10¹⁷s⁻¹). Optical microscopy has been used to clarify the bulk kinetics; there is evidence for a reactive layer at the surface of the decomposing solid. In celebration of the 60^th birthday of Dr Andrew K. Galwey     

铸膜液溶剂体系的物理参数与BCA不对称膜的透气性

铸膜液的溶剂体系（溶剂和非溶剂）对不对称膜形态的形成有重要作用。为了探索溶剂和透气性间的关系，本文考虑到了制备ＢＣＡ梯度密度不对称膜的各种溶剂的一系列物理参数，得到了一些定性结果，并指出了更全面、明确、解释两者关系的研究方向。     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

低场脉冲核磁共振测定二醋酸纤维素丝束中油剂

研究了采用低场脉冲核磁共振(NMR)测定二醋酸纤维素丝束油剂的新方法，给出NMR法测定二醋酸纤维素丝束油荆含量的标准曲线。同时对NMR法测量二醋酸纤维素丝束油荆不确定度进行了评估。结果表明，NMR法具有分析速度快、无污染、无损伤和准确度高的优点，适合于二醋酸纤维素丝束油荆的分析。