Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Analysis of Corrugated Long-Period Gratings in Planar Waveguides and Their Polarization Dependence

We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

Gas chromatographic determination of chlorinated phenols in the form of various derivatives

Derivatization of chlorophenols prior to gas chromatographic analysis resulted in a significant improvement of their chromatographic behaviour. Chlorophenols in the form of anisoles, acetates, and pentafluorobenzyl ethers were separated either on a HP-1 wide-bore capillary column or on a capillary column coated with a film of SE-54. Due to an enhancement of the poor electron-capture detection response of mono- and dichlorophenols, pentafluorobenzylation made it possible to determine trace amounts in spiked water. Moreover, simultaneous analysis of phenoxyalkanoic acids was accomplished under the same conditions.     

Preparation, separation and degradation of oligouronides produced by the polygalacturonic acid transeliminase of Bacillus pumilus.

Production of the end products of polygalacturonic acid degradation on a large scale was done by reacting free galacturonic acid with Bacillus pumilus polygalacturonic acid transeliminase (PATE, EC 4.2.2.2) to obtain a mixture of the barium salts of several oligouronides. Small amounts of the unsaturated oligouronides were separated by paper chromatography. Large quantities of unsaturated oligouronides were separated on a AG-1-X8 (formate) column by applying a sample of mixed oligouronides and stepwise elution was carried out with sodium formate buffer (pH 4.7). The unsaturated oligouronides were identified on the basis of chromatographic mobilities, Sephadex gel filtration data, COOH/CHO ratio, thiobarbituric acid-reacting material, bromine uptake, and chemical and enzymatic degradation data as unsaturated tri-, tetra-, and hexagalacturonic acids. The chemical degradation of these unsaturated oligouronides, done with 6 N HCl by heating at 100 degrees for 30 min, gave qualitatively identical products of hydrolysis. These products compared with authentic standards, were identified as galacturonic acid, formic acid, 5-formyl-2-furancarboxylic acid, and 2-furancarboxylic acid. Analysis of the enzymatic breakdown products of the higher unsaturated uronides showed that a minimum of four galacturonic acid units was required for the action of purified endo-PATE from B. pumilus. The unsaturated trimer was not attacked, thus accounting for its accumulation as the major end product of polygalacturonate degradation by this enzyme.     

Heavy-metal remediation by a fungus as a means of production of lead and cadmium carbonate crystals

We show here that reaction of the fungus, Fusarium oxysporum, with the aqueous heavy-metal ions Pb2+ and Cd2+ results in the one-step formation of the corresponding metal carbonates. The metal carbonates are formed by reaction of the heavy-metal ions with CO2 produced by the fungus during metabolism and thus provide a completely biological method for production of crystals of metal carbonates. The PbCO3 and CdCO3 crystals thus produced have interesting morphologies that are shown to arise because of interaction of the growing crystals with specific proteins secreted by the fungus during reaction. An additional advantage of this approach is that the reaction leads to detoxification of the aqueous solution and could have immense potential for bioremediation of heavy metals. Under conditions of this study, the metal ions are not toxic to the fungus, which readily grows after exposure to the metal ions.     

Novel feature extraction technique for fuzzy relational clustering of a flexible dopamine reuptake inhibitor

This paper describes a novel clustering methodology for classifying over 700 conformations of a flexible analogue of GBR 12909, a dopamine reuptake inhibitor that has completed phase I clinical trials as a treatment for cocaine abuse. The major aspect of the clustering methodology includes an efficient data-conditioning scheme where a systematic feature extraction procedure based on the structural properties of the molecule was used to reduce the associated feature space. This allowed region-specific clustering that focused on individual pharmacophore elements of the molecule. For clustering of the reduced feature set, the fuzzy clustering partitional method was utilized. Due to the relational nature of the feature data, fuzzy relational clustering was employed, and it successfully detected natural groups defined by rotational minima around N(sp(3))-C(sp(3)), O(sp(3))-C(sp(3)), and C(sp(3))-C(sp(2)) bonds. The proposed clustering methodology also employed several cluster validity measures, which corroborated the partitions produced by the clustering technique and agreed with the results of hierarchical clustering using the XCluster program. Representative structures which exhibited a reasonable spread of energies and showed good spatial coverage of the conformational space were identified for use as putative bioactive conformations in a future Comparative Molecular Field Analysis of GBR 12909 analogues. The clustering methodology developed here is capable of handling other computational chemistry problems, and the feature extraction technique can be easily generalized to other molecules.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...     

Data and device protection: A ToF‐SIMS,wetting, and XPS study of an Apple iPod nano

An important aspect of the robustness of an electronic device is its ability to resist water, fingerprints, dirt, and smudges that may compromise its ability to function and/or the information within it. Here, we report a chemical analysis by ToF‐SIMS, wetting, and XPS of the surfaces in a commercially available Apple iPod nano (8GB, MC525LL/A), which showed good resistance to its environment. This analysis reveals that the front panel (touchscreen) of the device is coated with a low free energy fluorinated polymer that may consist of short segments of a fluorinated hydrocarbon connected through ether linkages. No other part of the device appears to have this hydrophobic coating. A plasma treatment of the device leads to a deterioration of its performance. This work demonstrates how different analytical techniques can complement each other and contribute to a better understanding of a surface or a material. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrical characterization of strontium tartrate single crystals

The a.c. and d.c. conductivity of SrC₄H₄O₆·3H₂O are measured and are found to lie between usual conductivities of semiconductor and insulator. Temperature dependence of d.c. conductivity shows intrinsic conduction, which is confirmed by the slope of versus data. Due to application of thermal energy, noticeable conductivity peaks imply liberation of water molecules during dehydration and the formation of strontium oxalate. The conductivity plot has a nature similar to the intrinsic-to-extrinsic transition found in normal semiconductors. There occurs Efros hopping conduction in our samples.