Micro-pinch formation and extreme ultraviolet emission of laser-induced discharge plasma

Extreme ultraviolet(EUV) source produced by laser-induced discharge plasma(LDP) is a potential technical means in inspection and metrology. A pulsed Nd:YAG laser is focused on a tin plate to produce an initial plasma thereby triggering a discharge between high-voltage electrodes in a vacuum system. The process of micro-pinch formation during the current rising is recorded by a time-resolved intensified charge couple device camera. The evolution of electron temperature and density of LDP are obtained by optical emission spectrometry. An extreme ultraviolet spectrometer is built up to investigate the EUV spectrum of Sn LDP at 13.5 nm. The laser and discharge parameters such as laser energy, voltage, gap distance,and anode shape can influence the EUV emission.     

Non‐vacuum field desorption ion source implemented under super‐atmospheric pressure

Standard field desorption (FD) ionization is implemented under high vacuum condition. In this paper, non‐vacuum FD is performed under a super‐atmospheric pressure environment using untreated tungsten wires as FD emitter, and the ion source was coupled to a commercial linear ion trap mass spectrometer. The operating pressure of the ion source was 6 bars which was high enough to provide sufficient dielectric strength to the working gas so that the high voltage that was required for FD could be applied to the emitter without occurrence of electrical discharge. Non‐volatile sample deposited on the bare tungsten wire FD emitter was heated by flowing direct current through the emitter. Similar to vacuum FD, the formation of conical protrusion of the liquefied sample layer under the strong electric field was also observed. Using the present ion source, high pressure field‐desorption of polar neutral compounds, organic salts and ionic liquids is demonstrated. Copyright © 2012 John Wiley & Sons, Ltd.     

Magneto-Galvanic Resonances in Hollow Cathode Discharge Lamps

The galvanic behavior of a hollow cathode discharge versus an external weak magnetic field is investigated. The application of this field leads to disordering of the self-aligned states, which is detected as a resonance in the discharge current, named the magneto-galvanic signal. A correlation magneto-galvanic signal–operating voltage-current point is established and attributed to Penning ionization. The contribution of the metastable Ne I 1 s₅ to the magneto-galvanic resonance is also verified.     

Determination of Malathion Using Corona Discharge – Ion Mobility Spectrometry with Solid-Phase Microextraction

A corona discharge (CD) ion mobility spectrometer combined with solid-phase microextraction was constructed. The detection limit and stability of the system for malathion detection were improved using a novel sample introduction port through which the sample desorption was performed in high-temperature drift tube and the sample was introduced directly to the ionization area. The working parameters of the distance between CD needle tip and carrier gas outlet, the drift tube and carrier gas temperature, the carrier gas flow, and the voltage on CD needle were selected. When the extraction time for standard malathion was set to 5?min, the detection limit was 0.96?µg?L^?1 based on thrice the baseline noise, the linear range was 50–500?µg?L^?1, the correlation coefficient was approximately 0.9941, and the relative standard deviation was below 10%. Malathion-spiked lake water samples were analyzed using the developed system and the recovery was 92–102%. This method is suitable for the rapid detection of organophosphorus pesticide residues.     

Macrokinetic study on ozone boundary concentration. Effect of temperature

The process of ozone production in pure oxygen using the tubular, high voltage pulse supplied ozonizer was studied. The unusual methodology of conducting kinetics measurements of the ozone synthesis process was presented. It was shown how the process rate changes along the discharge gap. The effect of power density and gas residence time in the discharge gap on the process rate was analysed. The temperature influence on the course of the process, particularly on the ozone boundary concentration and ozone decomposition rate constant, was discussed.     

Novel chemical synthesis of polypyrrole thin film electrodes for supercapacitor application

Present investigation describes the cost-effective, novel and simple chemical synthesis of polypyrrole (PPy) thin films for supercapacitor application. These PPy films are characterized by different techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The XRD pattern reveals the amorphous nature of PPy thin film, which is highly feasible for supercapacitors. Further, FTIR study confirms the formation of PPy. The surface morphological study exhibit the coverage of uniform and smooth morphology on thin film. The electrochemical supercapacitive properties of PPy thin films are evaluated using cyclic voltammetry (CV) in 0.5 M H₂SO₄ electrolyte, which exhibits the maximum specific capacitance of 329 Fg⁻¹ at the scan rate of 5 mV s⁻¹. Additionally, an equivalent series resistance (ESR) of PPy thin films is found to be 1.08 Ω using electrochemical impedance measurement.     

辉光放电质谱技术应用进展

对辉光放电质谱(GDMS)在金属与半导体、非导体、薄层与深度分析、分子信息分析方面的应用和一些新装置、新方法进行了综述.着重介绍了近20年来我国学者在辉光放电质谱方面的成就,并结合国际上的报道对该领域的发展现状进行了总结.     

电子能量对沿面介质阻挡放电等离子体化学产物的影响

基于光电倍增管研制了一套无触发信号的双通道光学探测系统, 并组装了测试样机, 实现了对沿面介质阻挡放电(SDBD)等离子体约化电场的测量, 进而通过BOLSIG+软件获得了电子能量. 采用原位紫外吸收光谱和傅里叶变换红外光谱, 研究了SDBD等离子体在不同电压和频率下的化学产物的浓度变化, 并结合空气等离子体化学反应揭示了产物相互作用的微观机理. 结果表明, 电子能量能够改变电子碰撞反应的速率系数, 调控化学反应的源头活性粒子的浓度, 进而影响到化学产物的生成和猝灭.     

Composite Polybenzimidazole Membrane with High Capacity Retention for Vanadium Redox Flow Batteries

Currently, energy storage technologies are becoming essential in the transition of replacing fossil fuels with more renewable electricity production means. Among storage technologies, redox flow batteries (RFBs) can represent a valid option due to their unique characteristic of decoupling energy storage from power output. To push RFBs further into the market, it is essential to include low-cost materials such as new generation membranes with low ohmic resistance, high transport selectivity, and long durability. This work proposes a composite membrane for vanadium RFBs and a method of preparation. The membrane was prepared starting from two polymers, meta-polybenzimidazole (6 μm) and porous polypropylene (30 μm), through a gluing approach by hot-pressing. In a vanadium RFB, the composite membrane exhibited a high energy efficiency (~84%) and discharge capacity (~90%) with a 99% capacity retention over 90 cycles at 120 mA·cm⁻², exceeding commercial Nafion^® NR212 (~82% efficiency, capacity drop from 90% to 40%) and Fumasep^® FAP-450 (~76% efficiency, capacity drop from 80 to 65%).     

Removal of low-concentration benzene in indoor air with plasma-MnO2 catalysis system

Non-thermal plasma (NTP) and combined plasma-MnO₂ catalytic (CPMC) air cleaners were tested for removal of low-concentration benzene in air. Both air cleaners were made of stainless steel needle matrix plate and used DC corona discharger. The effects of discharge power and relative humidity (RH) on benzene removal efficiency were investigated in a closed chamber. The intermediate products produced in purification processes were analyzed using gas chromatography-mass spectrometer (GC-MS). The concentrations of discharge byproducts and CO₂ selectivity produced in both processes were also compared. It was found that the benzene removal efficiency increased with discharge power in both systems; With the increase of RH in air, benzene removal efficiency firstly increased and then decreased in NTP while it gradually decreased in CPMC. For a fixed discharge power of 9 W and RH of 20% in CPMC, the conversion of benzene increased from 82.9% to 89.6%, the CO₂ selectivity increased from 38% to 80%, the concentration of O₃ decreased from 25.3 ppm to 1.3 ppm, and NO₂ formation decreased from 234 ppm to 25.7 ppm, compared with NTP.