Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

PSt-b-PEO增容PA6/PS共混体系的研究

采用动态力学方法（ＤＭＡ），形态学方法（ＳＥＭ），研究了ＰＳｔ ｂ ＰＥＯ存在下尼龙６（ＰＡ６）／聚苯乙烯（ＰＳ）共混体系的相容性．研究表明，ＰＡ６和ＰＳ的简单共混体系，分散相相畴尺寸大，相界面清晰，断裂面光滑，呈脆性断裂，相容性极差，属不相容体系．而加入少量ＰＳｔ ｂ ＰＥＯ后分散相尺寸变小，界面层变厚，界面粘结力增强，表现出韧性特征．     

本体聚合制备Sm(OPr~i)(TTA)_2/PMMA光致发光材料

合成了(异丙氧基)二(α-噻吩甲酰三氟丙酮基)钐[Sm(OPri)(TTA)2]配合物,并通过本体聚合制备Sm(OPri)(TTA)2/PMMA光致发光材料,采用IR1、H-NMR、XRD、DMTA、FS、ESEM对其进行表征.结果表明,Sm-(OPri)(TTA)2/PMMA在396 nm波长激发下在562、598、644 nm处发射很强的Sm3+离子4G5/2→6H5/2,4G5/2→6H7/2,4G5/2→6H9/2跃迁的特征荧光,其发光强度与Sm(TTA)3/PMMA相当;其储能模量E′、玻璃化温度Tg和粘流温度Tf均比PMMA有所提高;Sm(OPri)3/PMMA形成类似交联结构聚合物,而Sm(OPri)(TTA)2/PMMA为线型无定型结构聚合物.     

SEBS/PMMA共混物膜的表面和本体形态结构

用扫描电镜(SEM)和原子力显微镜(AFM)研究了两种不同共混比的聚(苯乙烯-嵌-乙烯/丁烯-嵌-苯乙烯)(SEBS)和聚甲基丙烯酸甲酯(PMMA)共混膜的表面形态和相分离行为。结果表明,当膜厚为25μm时,两种共混膜表面均未见明显的相分离形貌,而在膜体相中可见宏观相分离结构。当膜厚为120 nm时,质量比为30/70的共混膜表面可见明显的“海-岛”状宏观相分离;而质量比为60/40的共混膜表面未见明显宏观相分离,仅有少量PMMA小颗粒嵌于SEBS基体中,形成SEBS趋于包裹PMMA微区的稳定“笼型”结构,其尺度属于介观相分离。退火后,两样品膜的体相形态与表面形貌趋于一致,均呈现宏观的相分离结构。     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

The effect of ionising radiation on poly(methyl methacrylate) used in intraocular lenses

Gamma radiation is increasingly being used to sterilise intraocular lenses (IOLs) made from poly(methyl methacrylate) (PMMA). In this study, samples of PMMA used in the fabrication of IOLs were exposed to irradiation doses typically used for their sterilisation. The effect of this treatment on the polymer was analysed by size-exclusion chromatography (SEC), UV-visible and infrared spectroscopy and scanning electron microscopy (SEM). The PMMA was found to have undergone chain scission, decarboxylation and colour change following the irradiation.     

Graft copolymer of polymethyl methacrylate-g-polycarbonate urethane and the fully gelled grafted networks

We have synthesized and characterized the graft copolymer of polymethyl methacrylate (PMMA)-graft-polycarbonate urethane (PCU) (designated PMMA-g-PCU) and the fully gelled mutually crosslinked network composed of both PMMA and PCU (designated as PMMA-PCU-N). Unlike the previously synthesized one phase PCU/PMMA simultaneous interpenetrating polymer networks (IPN's), both of these new materials exhibited two distinct T_g's (from DSC and DMA studies) at all compositions which we have studied. The two-phase nature of the graft and network polymer was confirmed by TEM with domain sizes smaller than those found in the blends of the linear PCU and PMMA chains. In comparison with the corresponding IPN's, the PMMA-g-PCU and the PMMA-PCU-N were thermally less stable and had a lower ultimate strength. © 1992 John Wiley & Sons, Inc.     

微波聚合制备单分散、超细聚甲基丙烯酸甲酯微球

在微波辐照下,通过甲基丙烯酸甲酯(MMA)的无乳化剂乳液聚合,制备出粒径单分散、超细聚甲基丙烯酸甲酯(PMMA)微球。微波显著缩短聚合诱导期,加快聚合反应,其部分原因是微波加快引发剂过硫酸钾(KPS)的分解。实验证明微波辐照下KPS的表观分解活化能(ED)由128.3kJ/mol降低到106.0kJ/mol。单体浓度是影响PMMA乳液粒子尺寸的主要因素,在[MMA]小于0.3mol/L时,平均粒径随单体浓度提高而线形增加;[MMA]为0.3～1.0mol/L时,平均粒径稳定在约200nm;之后随单体浓度进一步增加,乳液稳定性变差。引发剂浓度增加对平均粒径影响较小,但增大引发剂浓度可显著降低粒径分散度。选取[MMA]为0.23～0.3mol/L、[KPS]为3×10-3～6×10-3mol/L可以得到粒径200nm的单分散微球。以丙酮/水(体积比1/3)为反应介质,可制备出数均粒径45nm的PMMA纳米粒子。在体系中加入3.5×10-3mol/L的Cu2+,可制备出数均粒径67nm、单分散的PMMA纳米粒子。     

重氮树脂与十二烷基硫酸钠相互作用研究

重氮树脂与十二烷基硫酸钠相互作用研究罗杨磊曹维孝（北京大学化学与分子工程学院北京１００８７１）关键词重氮树脂，十二烷基硫酸钠，负性ＰＳ版随着化学与生命科学领域的发展，大分子与小分子在溶液的相互作用越来越受到关注．表面活性剂因其具有自组装能力，...     

Infrared ellipsometry of interdiffusion in thin films of miscible polymers

A new application of infrared ellipsometry is reported. Specifically, the interdiffusion between thin films of miscible polymers—poly(methyl methacrylate) and poly(vinylidene fluoride)—is detected in a non‐invasive measurement. A novel technique of data analysis for interdiffusion was developed and is described. The validity of the approach is supported by simulations of diffusion in a bilayer. The onset of extensive interdiffusion over a time period of 15 min occurs at a temperature of 160 °C. At a temperature of 190 °C, the data show that complete mixing of a bilayer (850 nm thick) occurs within 30 s, which is consistent with previously reported values of the mutual diffusion coefficient. Infrared ellipsometry is non‐invasive, applicable at elevated temperatures and relatively fast and sensitive. Although, in these measurements, it was unable to determine a concentration profile at the interface, infrared ellipsometry was used successfully to detect when interdiffusion had occurred. Hence, it is a useful means for screening polymer pairs for miscibility. Copyright © 2004 John Wiley & Sons, Ltd.