一种微波加热装置的风冷散热研究

微波加热装置工作过程会散发大量的热量,如果不能及时排出,会造成输出功率的下降。本文以九个磁控管加热单元组成的微波加热装置为研究对象,首先提出一种风冷散热结构设计,接着通过Fluent热仿真软件验证结构设计的合理性,然后通过对比分析加热装置进风口位置、面积大小等因素对散热效果的影响,对散热结构进行改进,进一步提高了内部磁通管结构的温度一致性,强化了加热装置的散热能力。     

超临界CO2布雷登循环热电联供系统多目标优化

本文研究了以超临界CO₂布雷登循环为原动机的热电联供系统,对系统主要运行参数进行了分析,得到运行参数对于系统热力学性能和经济性能的影响规律。同时,以一次能源利用率和单位输出成本作为目标函数,采用多目标遗传算法对系统进行了优化;在优化结果的基础上,通过TOPSIS法决策出最优解,并与单目标最优解进行对比。结果表明,透平进口温度、透平进口压力和压缩机进口温度的增大有利于系统效率的提高;作为代价,成本也相应增加。在热电比0~4范围内,尽可能增大热电比能够最大程度上降低系统的单位输出成本,提高能源的利用率。     

Dissipative Heating of a Viscoelastic Cylinder under a Load Steadily Moving over Its Surface

The Fourier method is used to find the analytical solutions to two-dimensional quasistatic problems of stationary polyharmonic vibrations and dissipative heating of a linearly viscoelastic cylinder. The influence of the cylinder thickness and the width of the loading area on the thermomechanical state of the cylinder is studied based on numerical data__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 23–32, February 2005.     

微波加热制备空心和锯齿形貌Bi_2Te_3晶体(英文)

Well-crystallized Bi₂Te₃ hollow spheres and nanosaws were prepared by microwave heating. Both the ionic liquid and the microwave heating play important role in the formation of the above nanostructures. Hollow spheres can not be obtained only by electronic stove heating, while the addition of ionic liquid leads to fast preparation of nanosaws structure under microwave heating conditions. The similar experimental results have been observed in the preparation of Bi₂S₃, Sb₂S₃ and Bi₂Se₃ nanostructures.     

微波加热合成多孔花状结构的纳米α-Bi_2O_3

<正>金属氧化物如氧化钛、氧化锌、氧化铜、氧化铁和氧化铋等是一类重要的半导体材料,它们在磁存储介质、太阳能转换、电子器件和催化等领域里有着广泛的应用,因此其纳米粉体的制备及性能研究吸引了众多的科学工作者。     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

Influence of the anode material on the characteristics of an analytical glow discharge cell

The energy transfer to the discharge gas due to various collision processes in the plasma and the heating of the sample are widely known effects in glow discharge (GD) spectroscopy. Despite of the considerable thermal effects and their serious influence on the performance of GD devices, measurements of the discharge gas and sample temperatures are not common at all. The gas temperature depends on the power absorption of the discharge as well as on the temperature of boundaries (sample and anode). In this work the influence of different anode materials in a Grimm-type source on the voltage–current characteristics, crater shapes and GD spectra is investigated. Anodes made of titanium and copper alloys, graphite, and steel with thermal conductivities covering a wide range of values are used. For a fixed voltage and pressure a decrease of the measured current is observed for bad thermal conductive anodes. Cooling of the sample results in an increase of the measured current. Both observations can be explained by changes of the discharge gas temperature. The temperature of the sample is measured from the back side and compared for different anodes. Further, it is found that the choice of the anode material (i) has no significant influence on the crater shape, (ii) results in slightly different sputtering rates and (iii) strong differences of the GD spectra.     

Fast oxidation of secondary alcohols by the bromate-bromide system using cyclic microwave heating in acidic water

We report an improved, gentle, cyclic microwave activation technique for the oxidation of secondary alcohols using nonhazardous hypobromous acid (BrOH) as the reagent in acidic water. Several aliphatic and aromatic secondary alcohols were successfully oxidized to the corresponding ketones using this technique in high yields and with only minor amounts of side products.     

Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues.     

Ion Heating in Dusty Plasma of Noble Gas Mixtures

Ion heating in dusty plasma of noble gas mixtures is studied by the observation of dust particles in stratified glow discharge. The particles and their formations can be used as a “contact‐free” probe of the ion flows. It is shown that under condition of experiments transition of dust particles into crystalline state in pure gases occur at much lower pressures in comparison to the case of gas mixtures. This observation is also supported by the evaluation of “effective” kinetic temperature of dust particles as defined from the velocity distribution function at the same set of discharge parameters. Absolute value of temperature of dust component in the mixture of helium and argon indicates important role of argon ionization process (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)